环氧乙烯基酯树脂及其复合材料高温高压矿化水条件下老化性能研究

doi:10.19936/j.cnki.2096-8000.20220828.012

复合材料科学与工程 ›› 2022, Vol. 0 ›› Issue (8): 82-88.DOI: 10.19936/j.cnki.2096-8000.20220828.012

环氧乙烯基酯树脂及其复合材料高温高压矿化水条件下老化性能研究

李风^1,2, 王亭沂^1,2, 张瑾^1,2, 范路^1,2, 杨成瑞^1,2,3, 时宪^1,2

1.中国石油化工股份有限公司胜利油田分公司技术检测中心,东营257000;
2.中国石油化工股份有限公司胜利油田检测评价研究有限公司,东营257000;
3.北京化工大学材料科学与工程学院,北京100029

收稿日期:2021-09-07 出版日期:2022-08-28 发布日期:2022-09-27
作者简介:李风(1970-),男,硕士,高级工程师,主要从事石油相关复合材料制品技术开发、研究工作,lifeng795.slyt@sinopec.com。
基金资助:
中石化集团项目,碳/玻纤维复合储罐、管道材料老化机理研究(KL20043)

Research on the aging properties of epoxy vinyl resin and its composite materials under high temperature and high pressure mineralized water conditions

LI Feng^1,2, WANG Ting-yi^1,2, ZHANG Jin^1,2, FAN Lu^1,2, YANG Cheng-rui^1,2,3, SHI Xian^1,2

1. Technical Testing Center of Sinopec Shengli Oil Fields Branch, Dongying 257000, China;
2. Test Assessment and Research Co., Ltd., Sinopec Shengli Oilfield, Dongying 257000, China;
3. College of Material Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China

Received:2021-09-07 Online:2022-08-28 Published:2022-09-27

摘要/Abstract

摘要： 制备环氧乙烯基酯树脂及其玻璃纤维增强复合材料,对其进行高温高压(70 ℃+5 MPa)矿化水老化试验,研究纯树脂、树脂基复合材料在高温高压矿化水老化条件下的性能劣化趋势及其老化机理。研究发现:老化后材料的力学性能出现大幅度降低,经老化49 d后复合材料的剩余拉伸强度为56.79%,环氧乙烯基酯的拉伸强度仅为27.30%;老化前后,环氧乙烯基酯的特征官能团发生变化,发生了酯基的水解、材料内部形成氢键等物理化学反应,对材料性能产生不利影响;环氧乙烯基酯的FTIR以及XPS数据表明树脂的老化程度从材料的表面沿厚度方向逐渐减弱;SEM结果表明,环氧乙烯基酯在老化过程中断裂失效模式从韧性断裂慢慢转变为脆性断裂,在复合材料内部还发生了界面脱黏现象;树脂及复合材料的DMA数据显示,由于老化后树脂分子链的断裂以及水分子的增塑效应,复合材料的玻璃化温度降低并且储能模量发生了变化。

关键词: 环氧乙烯基酯, 复合材料, 老化, 强度, 微观形貌

Abstract: In this study, the epoxy vinyl ester resin and its glass fiber reinforced composite materials have been successfully prepared, and the mineralized water aging test under high temperature and high pressure (70 ℃+5 MPa) has been conducted to investigate the performance of the degradation as well as the aging mechanism under high temperature and high pressure conditions. It has been found that the mechanical properties of as-prepared resin and composite materials are greatly influenced due to the aging. For instance, after 49 days of aging, the stretching of the composite material dropped to 56.79%. Meanwhile, the residual tensile strength of epoxy vinyl ester was only 27.30%. The characteristic functional groups of the ester within the resin significantly changed during the aging, due to hydrolysis of the ester groups as well as the formation of hydrogen bonds leading to the reduction of the mechanical properties of the materials. According to FTIR and XPS results, the degree of aging gradually decreased from the surface into the interior of the materials. From SEM, it was shown that the fracture failure mode of epoxy vinyl ester gradually changed from ductile fracture to brittle fracture as the aging was processed. In addition, the interfacial debonding occurred within the composite material matrix. In the end, the DMA results indicated that the rupture of the resin molecular chain after aging, as well as the plasticizing effect of water molecules, led to the decreasing of the glass transition temperature and the storage modulus of the composite materials.

Key words: epoxy vinyl resin, composite, aging, strength, micro morphology

中图分类号:

TB332

李风, 王亭沂, 张瑾, 范路, 杨成瑞, 时宪. 环氧乙烯基酯树脂及其复合材料高温高压矿化水条件下老化性能研究[J]. 复合材料科学与工程, 2022, 0(8): 82-88.

LI Feng, WANG Ting-yi, ZHANG Jin, FAN Lu, YANG Cheng-rui, SHI Xian. Research on the aging properties of epoxy vinyl resin and its composite materials under high temperature and high pressure mineralized water conditions[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(8): 82-88.

参考文献

[1] 刘建华, 赵亮, 李松梅, 等. 盐雾环境对玻璃纤维增强树脂基复合材料力学性能的影响[J]. 复合材料学报, 2007(3): 18-22.
[2] 李萌. 游艇用玻纤: 碳纤混杂增强复合材料耐盐雾研究及寿命预测[J]. 工程塑料应用, 2019, 47(3): 85-91.
[3] 王立伟. 油田用碳纤增强杂萘联苯聚芳醚复合材料及其工程化研究[D]. 大连: 大连理工大学, 2019.
[4] 王晓宁. 紫外、高低温老化对玻纤增强复合材料性能的影响[D]. 乌鲁木齐: 新疆大学, 2017.
[5] 陈维强. 耐高温碳纤维抽油杆工艺与性能研究[D]. 北京: 北京化工大学, 2004.
[6] 于华, 陈亮. 新型石油储罐防腐用乙烯基酯树脂[J]. 中国涂料, 2006, 21(4): 11-13.
[7] 陈竞哲. 系列HNBR复合材料的加工、性能及老化研究[D]. 青岛: 青岛科技大学, 2018.
[8] COTUGNO S, MENSITIERI G, MUSTO P, et al. Molecular interactions in and transport properties of densely cross-linked networks: A time-resolved FT-IR spectroscopy investigation of the epoxy/H₂O system[J]. Macromolecules, 2005, 38(3): 125-162.
[9] REIS J, MARTINS F, MATTOS H. Influence of ageing in the failure pressure of a GFRP pipe used in oil industry[J]. Engineering Failure Analysis, 2017, 71: 120-130.
[10] 赵鹏. 碳纤维/不饱和聚酯树脂复合材料湿热老化行为研究[D]. 北京: 北京化工大学, 2009.
[11] BARKOULA N M, KARABELA M, ZAFEIOPOULOS N E, et al. Fast curing versus conventional resins-degradation due to hygrothermal and UV exposure[J]. EXPRESS Polymer Letters, 2020, 14(5): 401-415.
[12] BAGHERPOUR S, BAGHERI R, SAATCHI A. Estimation of long-term stiffness of storage aged GFRP composite samples immersed in HCl acid by TTSP method[J]. International Scholarly Research Notices, 2011, 251219.
[13] KAJORNCHEAPPUNNGAM S, GUPTA R K, GANGARAO H V S. Effect of aging environment on degradation of glass-reinforced epoxy[J]. Journal of Composites for Construction, 2002, 6(1): 61-69.
[14] UTHAMAN A, XIAN G, THOMAS S, et al. Durability of an epoxy resin and its carbon fiber-reinforced polymer composite upon immersion in water, acidic, and alkaline solutions[J]. Polymers, 2020, 12(3): 614.
[15] SAWPAN M A. Shear properties and durability of GFRP reinforcement bar aged in seawater[J]. Polymer Testing, 2019, 75: 312-320.

环氧乙烯基酯树脂及其复合材料高温高压矿化水条件下老化性能研究

Research on the aging properties of epoxy vinyl resin and its composite materials under high temperature and high pressure mineralized water conditions

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王孟, 刘程, 张玉, 贾航, 乔越, 蹇锡高. 成型温度对CF/PPEK复合材料的缺陷和力学性能影响[J]. 复合材料科学与工程, 2024, 0(3): 5-12.
[2]	史洪源, 任文坚, 党杰, 周鹏. 玻璃纤维增强复合材料超声检测声场的CIVA仿真与试验研究[J]. 复合材料科学与工程, 2024, 0(3): 20-24.
[3]	杨思鑫, 曹忠亮, 顾付伟. 双三角点阵夹芯结构低速冲击下的动态响应与失效机制[J]. 复合材料科学与工程, 2024, 0(3): 25-34.
[4]	张斌, 赵晶, 王世杰. Kagome点阵结构参数对其压缩特性的影响及轻质化设计[J]. 复合材料科学与工程, 2024, 0(3): 35-42.
[5]	王宇轩, 曹东风, 胡海晓, 李书欣. 计及层内和层间的L形层合板失效的数值研究[J]. 复合材料科学与工程, 2024, 0(3): 43-53.
[6]	耿健, 董九志, 梅宝龙, 蒋秀明. 三维四向碳/碳复合材料力学性能预测与试验验证[J]. 复合材料科学与工程, 2024, 0(3): 54-60.
[7]	高坤, 张兆恒, 邢亚娟, 左小彪, 王博尧, 赵泽华. 含磷POSS阻燃乙烯基酯树脂性能研究[J]. 复合材料科学与工程, 2024, 0(3): 61-64.
[8]	郑子君, 乔英, 邵家儒. 基于机器视觉的短纤维复合材料的取向度提取方法[J]. 复合材料科学与工程, 2024, 0(3): 65-72.
[9]	许晓婷, 郝恩全, 邵慧奇, 邵光伟, 毕思伊, 陈南梁, 蒋金华. 三维大隔距机织间隔织物柔性复合材料的服役性能研究[J]. 复合材料科学与工程, 2024, 0(3): 73-78.
[10]	苏桐, 胡果馨, 刘振. 全碳纤维复合材料太阳能无人机机翼结构优化设计[J]. 复合材料科学与工程, 2024, 0(3): 79-83.
[11]	伍强, 赵凯, 刘鹏飞, 张涛涛, 朱德勇. Z形纤维增强复合材料层压板固化变形分析[J]. 复合材料科学与工程, 2024, 0(3): 84-90.
[12]	宋贵宾, 黄光启, 杨胜春. 复合材料层压板胶接挖补修理分析方法及影响因素研究[J]. 复合材料科学与工程, 2024, 0(3): 91-96.
[13]	王耀, 邵丹丹, 雷炳育. 共沉淀析出-热压技术制备高储能性能复合材料薄膜[J]. 复合材料科学与工程, 2024, 0(3): 97-102.
[14]	张仲香, 刘宝锋, 方晨鑫, 陈文光, 顾育慧, 李军向. 沙戈荒环境下风电叶片中复合材料耐高温性能研究[J]. 复合材料科学与工程, 2024, 0(3): 103-107.
[15]	邓忠, 支亚非, 程家林, 杨文. 太阳能无人机机翼复合材料主梁铺层优化[J]. 复合材料科学与工程, 2024, 0(3): 108-112.