基于宏观模型的FRP筋纤维混凝土梁拉伸刚化效应研究

doi:10.19936/j.cnki.2096-8000.20230228.009

复合材料科学与工程 ›› 2023, Vol. 0 ›› Issue (2): 67-74.DOI: 10.19936/j.cnki.2096-8000.20230228.009

基于宏观模型的FRP筋纤维混凝土梁拉伸刚化效应研究

安茹, 李源康, 陈国雄, 符师桦^*

海南大学土木建筑工程学院,海口 570228

收稿日期:2022-08-17 出版日期:2023-02-28 发布日期:2023-04-28
通讯作者: 符师桦(1985—),男,博士,教授,主要从事混凝土结构或构件力学建模、土木工程材料力学行为、光学测量方法在土木工程中的应用,fushihua@hainanu.edu.cn。
作者简介:安茹(1996—),女,硕士研究生,主要从事纤维混凝土材料与构件方面的研究。
基金资助:
国家自然科学基金(11802080);海南省自然科学基金(118QN182,520CXTD433)

Investigation of tension stiffening effect in fiber concrete beam reinforced with FRP bars based on macroscopic model

AN Ru, LI Yuankang, CHEN Guoxiong, FU Shihua^*

School of Civil Engineering and Architecture, Hainan University, Haikou 570228, China

Received:2022-08-17 Online:2023-02-28 Published:2023-04-28

摘要/Abstract

摘要： 在混凝土中添加纤维能有效控制纤维增强聚合物(Fiber Reinforced Polymer,FRP)筋混凝土梁的裂缝宽度并提高梁的延性。本研究结合纤维混凝土受拉本构关系,引入一个减弱系数描述纤维混凝土开裂后的刚度,建立了能够反映FRP筋纤维混凝土梁拉伸刚化效应的三维有限元模型。在不同纤维含量和不同配筋率下,模拟获得了与实验结果一致的荷载-位移响应。此外,有限元分析得到的裂缝形态与实验结果良好吻合,且随着减弱系数的减小,裂缝扩展减缓,极限荷载下裂缝数量增多,宽度减小。研究还表明,减弱系数随纤维含量特征参数的增大而线性减小,其线性斜率受配筋率的影响微弱,而截距受配筋率的影响明显。

关键词: FRP筋, 纤维混凝土梁, 拉伸刚化, 有限元, 减弱系数

Abstract: Adding fiber in concrete can effectively decrease the crack width of FRP reinforced concrete beams and improve the ductility of the beams. In this study, combined with the tensile constitutive relation of fiber reinforced concrete, a weakening coefficient was introduced to describe the stiffness of fiber reinforced concrete after cracking, and a three-dimensional finite element model was established to reflect the tension stiffening effect of fiber reinforced concrete beam reinforced with FRP bars. The simulated load-displacement curves were consistent with the experimental results under different fiber contents and different reinforcement ratios. In addition, the crack patterns obtained by the finite element analysis were in good agreement with the experimental results. With the decrease of the weakening coefficient, the crack propagation slows down, the number of cracks increases and the width decreases under the ultimate load. The study also shows that the weakening coefficient decreases linearly with the increase of the characteristic parameter of fiber content, and the slope was weakly affected by the reinforcement ratio, while the intercept was significantly affected by the reinforcement ratio.

Key words: FRP bars, fiber reinforced concrete beams, tension stiffening, finite element, weakening coefficient

中图分类号:

TB332

安茹, 李源康, 陈国雄, 符师桦. 基于宏观模型的FRP筋纤维混凝土梁拉伸刚化效应研究[J]. 复合材料科学与工程, 2023, 0(2): 67-74.

AN Ru, LI Yuankang, CHEN Guoxiong, FU Shihua. Investigation of tension stiffening effect in fiber concrete beam reinforced with FRP bars based on macroscopic model[J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(2): 67-74.

参考文献

[1] KAKLAUSKAS G, RAMANAUSKAS R, JAKUBOVSKIS R. Mean crack spacing modelling for RC tension elements[J]. Engineering Structures, 2017, 150: 843-851.
[2] 陈国雄, 安茹, 符师桦. FRP筋混凝土梁拉伸刚化效应模型研究[J]. 复合材料科学与工程, 2022(2): 11-18.
[3] GARCÍA R, CALDENTEY A P. Influence of type of loading (tension or bending) on cracking behaviour of reinforced concrete elements. Experimental study[J]. Engineering Structures, 2020, 222: 111134.
[4] MUHAMAD R, ALI M S M, OEHLERS D J, et al. The tension stiffening mechanism in reinforced concrete prisms[J]. Advances in Structural Engineering, 2012, 15(12): 2053-2069.
[5] LEE G Y, KIM W. Cracking and tension stiffening behavior of high-strength concrete tension members subjected to axial load[J]. Advances in Structural Engineering, 2009, 12(2): 127-137.
[6] DE TERÁN J R D, HAACH V G. Equivalent stress-strain law for embedded reinforcements considering bond-slip effects[J]. Engineering Structures, 2018, 165: 247-253.
[7] STRAMANDINOLI R S B, LA ROVERE H L. An efficient tension-stiffening model for nonlinear analysis of reinforced concrete members[J]. Engineering Structures, 2008, 30(7): 2069-2080.
[8] CHEN G, AN R, XU J, et al. Finite element analysis of the reinforcement ratio effect on tension stiffening in FRP reinforced concrete beams[J]. Composite Structures, 2022, 298: 116020.
[9] 黄华, 郝润奇, 黄敏. FRP筋混凝土结构的研究现状分析[J].玻璃钢/复合材料, 2018(7): 108-116.
[10] 张志金, 刘华新, 李庆文, 等. 无腹筋BFRP筋混凝土深梁受剪性能研究[J].玻璃钢/复合材料, 2019(1): 36-41.
[11] 于雯, 黄悦, 黄谦, 等. FRP筋预应力混凝土梁长期性能研究进展[J]. 复合材料科学与工程, 2022(4): 111-119.
[12] Guide for the design and construction of Concrete Reinforced with Fiber Reinforced Polymers (FRP) bars, ACI Committee 440: ACI 440.1R-15[S]. Farmington Hills, MI, USA: American Concrete Institute, 2015.
[13] ABED F, ALHAFIZ A R. Effect of basalt fibers on the flexural behavior of concrete beams reinforced with BFRP bars[J]. Composite Structures, 2019, 215: 23-34.
[14] ATTIA K, ALNAHHAL W, ELREFAI A, et al. Flexural behavior of basalt fiber-reinforced concrete slab strips reinforced with BFRP and GFRP bars[J]. Composite structures, 2019, 211: 1-12.
[15] CHELLAPANDIAN M, MANI A, PRAKASH S S. Effect of macro-synthetic structural fibers on the flexural behavior of concrete beams reinforced with different ratios of GFRP bars[J]. Composite Structures, 2020, 254: 112790.
[16] 朱海堂, 程晟钊, 高丹盈, 等. BFRP 筋钢纤维高强混凝土梁受弯承载力试验与理论[J]. 复合材料学报, 2018, 35(12): 3313-3323.
[17] MAZAHERIPOUR H, BARROS J A O, SENA-CRUZ J. Tension-stiffening model for FRC reinforced by hybrid FRP and steel bars[J]. Composites Part B: Engineering, 2016, 88: 162-181.
[18] XIE T, MOHAMED ALI M S, VISINTIN P, et al. Partial interaction model of flexural behavior of PVA fiber-reinforced concrete beams with GFRP bars[J]. Journal of Composites for Construction, 2018, 22(5): 04018043.
[19] 程晟钊. BFRP 筋钢纤维复合增强高强混凝土梁受弯性能研究[D]. 郑州: 郑州大学, 2018.
[20] 李金章. BFRP 筋钢纤维高强混凝土梁受弯性能试验研究[D]. 郑州: 郑州大学, 2012.
[21] 马小霞. FRP筋钢纤维混凝土梁受弯性能研究[D]. 武汉: 湖北工业大学, 2019.
[22] 万聪. 筋材与钢纤维对混凝土梁受弯性能的影响研究[D]. 郑州: 郑州大学, 2020.
[23] CEB. CEB-FIP Model Code 1990, First Draft[M]. CEB Bulletin D′information, 1990: 195.
[24] CHALIORIS C E, PANAGIOTOPOULOS T A. Flexural analysis of steel fibre-reinforced concrete members[J]. Computers and Concrete, 2018, 22(1): 11-25.
[25] 高丹盈. 钢纤维混凝土拉伸应力应变关系的试验研究[J]. 水力发电, 1991, 11: 54-58.
[26] AL-HAMRANI A, ALNAHHAL W. Shear behavior of basalt FRC beams reinforced with basalt FRP bars and glass FRP stirrups: Experimental and analytical investigations[J]. Engineering Structures, 2021, 242: 112612.
[27] ZHANG C, WANG Y, ZHANG X, et al. Mechanical properties and microstructure of basalt fiber-reinforced recycled concrete[J]. Journal of Cleaner Production, 2021, 278: 123252.
[28] SUN X, GAO Z, CAO P, et al. Fracture performance and numerical simulation of basalt fiber concrete using three-point bending test on notched beam[J]. Construction and Building Materials, 2019, 225: 788-800.
[29] SOORIYAARACHCHI H, PILAKOUTAS K, BYARS E. Tension stiffening behavior of GFRP-reinforced concrete[J]. Special Publication, 2005, 230: 975-990.
[30] AMIN A, FOSTER S J, WATTS M. Modelling the tension stiffening effect in SFR-RC[J]. Magazine of Concrete Research, 2016, 68(7): 339-352.

基于宏观模型的FRP筋纤维混凝土梁拉伸刚化效应研究

Investigation of tension stiffening effect in fiber concrete beam reinforced with FRP bars based on macroscopic model

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨思鑫, 曹忠亮, 顾付伟. 双三角点阵夹芯结构低速冲击下的动态响应与失效机制[J]. 复合材料科学与工程, 2024, 0(3): 25-34.
[2]	王宇轩, 曹东风, 胡海晓, 李书欣. 计及层内和层间的L形层合板失效的数值研究[J]. 复合材料科学与工程, 2024, 0(3): 43-53.
[3]	伍强, 赵凯, 刘鹏飞, 张涛涛, 朱德勇. Z形纤维增强复合材料层压板固化变形分析[J]. 复合材料科学与工程, 2024, 0(3): 84-90.
[4]	赵艺, 赵刚, 范欣愉, 闫忠伟, 葛亚琼, 徐剑. 基于渐进损伤模型的热固性复合材料电阻焊接头强度的尺寸效应研究[J]. 复合材料科学与工程, 2024, 0(2): 45-51.
[5]	张弘强, 陈栋, 李成. CFRP层合板双面挖补补片设计及性能分析[J]. 复合材料科学与工程, 2024, 0(2): 52-58.
[6]	贺利乐, 李书宝, 郑建校, 邵献忠. 考虑剪切非线性的复合材料层合板渐进损伤数值模拟[J]. 复合材料科学与工程, 2024, 0(1): 45-53.
[7]	张亚楠, 陈栋, 时建纬, 铁瑛, 李成. CFRP层合板单搭胶接接头胶板界面剥离强度仿真分析[J]. 复合材料科学与工程, 2024, 0(1): 74-82.
[8]	王平安. 基于嵌入式约束的机织复合材料细观建模与分析[J]. 复合材料科学与工程, 2023, 0(9): 92-97.
[9]	余章杰, 张琪, 蔡登安, 戴征征, 周光明. 碳纤维/环氧树脂复合材料-金属连接结构面外拉伸失效机制[J]. 复合材料科学与工程, 2023, 0(7): 5-12.
[10]	孔祥清, 张文萍, 张惠玲, 章文姣, 李若男, 付莹. 冲击荷载作用下仿生蜂窝夹层梁动态响应数值模拟研究[J]. 复合材料科学与工程, 2023, 0(7): 19-25.
[11]	黄立新, 张院秀, 黄君. 界面范德华作用对石墨烯/聚乙烯复合材料弹性性能的影响[J]. 复合材料科学与工程, 2023, 0(7): 26-34.
[12]	王琪, 谢煜斐, 袁连忠, 高进可, 陆嘉君. 连续玻纤增强热塑性复合管内压下力学性能研究[J]. 复合材料科学与工程, 2023, 0(7): 79-85.
[13]	陈淑仙, 闫登杰, 丁镇源. 加热工艺对树脂基复合材料挖补修理固化过程的影响[J]. 复合材料科学与工程, 2023, 0(6): 44-51.
[14]	张学文, 王继辉, 陈宏达, 倪爱清. 单向增强热塑性复合材料热冲压成型仿真与优化[J]. 复合材料科学与工程, 2023, 0(6): 104-114.
[15]	裴勇勇, 虞筱琛, 徐海兵, 吕东喜, 祝颖丹. Kagome点阵夹芯结构平压性能研究[J]. 复合材料科学与工程, 2023, 0(5): 5-11.