含缺陷陶瓷基复合材料L形构件承载性能及破坏过程

doi:10.19936/j.cnki.2096-8000.20230628.006

复合材料科学与工程 ›› 2023, Vol. 0 ›› Issue (6): 37-43.DOI: 10.19936/j.cnki.2096-8000.20230628.006

含缺陷陶瓷基复合材料L形构件承载性能及破坏过程

周俊辰¹, 耿谦^2*, 段玉斌³, 王栋梁¹

1.中国兵器工业试验测试研究院,渭南 714200;
2.西安交通大学航天航空学院机械结构强度与振动国家重点实验室先进飞行器服役环境与控制陕西省重点实验室,西安 710049;
3.上海交通大学机械与动力工程学院机器人研究所机械系统与振动国家重点实验室,上海 200240

收稿日期:2022-05-06 出版日期:2023-06-28 发布日期:2023-08-22
通讯作者: 耿谦(1986—),男,博士,助理研究员,主要研究方向为复合材料结构分析与设计,qiangeng@xjtu.edu.cn。
作者简介:周俊辰(1994—),男,硕士,助理研究员,主要研究方向为复合材料结构强度。

The bearing capacity and the damage process of the ceramic matrix composites L-shaped specimens with defects

ZHOU Junchen¹, GENG Qian^2*, DUAN Yubin³, WANG Dongliang¹

1. Norinco Group Testing and Research Institute, Weinan 714200, China;
2. Shannxi Key Laboratory of Environment and Control for Flight Vehicle, State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an 710049, China;
3. State Key Laboratory of Mechanical System and Vibration, Robotics Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Received:2022-05-06 Online:2023-06-28 Published:2023-08-22

摘要/Abstract

摘要： 本文基于图像重构技术,构建了陶瓷基复合材料代表性体积单胞及L形构件的有限元模型,预测了陶瓷基复合材料的弹性模量。通过试验和数值仿真,研究了强制拉伸位移作用下L形构件的承载性能及破坏过程。结果表明,在缺陷对构件承载性能的影响规律方面,仿真结果与试验结果一致性较好,两者相差约10%。L形构件内侧圆角区域主要承受拉伸作用,外侧主要承受压缩作用。内侧缺陷影响试样的承载性能,承载性能随缺陷面积的增大而降低;而外侧缺陷会影响试样的破坏过程,微观缺陷会扩展为宏观破坏,以材料脱层为主。本文的研究方法与结果可为陶瓷基复合材料典型构件承载性能的测试与分析提供参考。

关键词: 陶瓷基复合材料, L形构件, 承载性能, 破坏过程, 强度分析, 准静态加载

Abstract: Based on the image reconstruction technology, we develop finite element models of the representative volume and L-shaped specimens of ceramic matrix composites, through which the elastic modulus of ceramic matrix composites is predicted. With a combination of numerical simulations and experiments, the bearing capacity and damage process of L-shaped specimens under tensile are studied. The results show that experiment and simulation results are in good consistency regarding the influence of defects on the bearing capacity, and the quantity difference is about 10%. The inner corner of specimens is mainly subjected to tension, while the outside area is subjected to compression. Defects on the inner corner affect the bearing capacity of specimens. The bearing capacity degrades as the defect area broadens. However, defects on the outside of specimens affect the damage process. Microscopic defects propagate and eventually lead to macroscopic failures of the specimen, mainly in the form of material delamination. This study can provide a reference for the testing and analysis of the bearing capacity of ceramic matrix composites.

Key words: ceramic matrix composites, L-shaped specimens, bearing capacity, damage process, strength analysis, quasi-static loading

中图分类号:

TB332

周俊辰, 耿谦, 段玉斌, 王栋梁. 含缺陷陶瓷基复合材料L形构件承载性能及破坏过程[J]. 复合材料科学与工程, 2023, 0(6): 37-43.

ZHOU Junchen, GENG Qian, DUAN Yubin, WANG Dongliang. The bearing capacity and the damage process of the ceramic matrix composites L-shaped specimens with defects[J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(6): 37-43.

参考文献

[1] 陈刘定, 童小燕, 程起有, 等. 平纹编织C/SiC复合材料层间断裂行为试验研究[J]. 机械强度, 2012, 34(1): 97-101.
[2] HE Z B, ZHANG L T, CHEN B, et al. Failure behavior of 2D C/SiC I-beam under bending load[J]. Composite Structures, 2015, 132: 321-330.
[3] 童小燕, 张佳丽, 姚磊江, 等. 2D-C/SiC拉伸破坏的AE信号聚类分析[J]. 固体力学学报, 2014, 35(2): 109-114.
[4] WHITLOW T, JONES E, PRZYBYLA C. In-situ damage monitoring of a SiC/SiC ceramic matrix composite using acoustic emission and digital image correlation[J]. Composite Structures, 2016, 158: 245-251.
[5] GAO Y, XIAO D H, HE T, et al. Identification of damage mechanisms of carbon fiber reinforced silicon carbide composites under static loading using acoustic emission monitoring[J]. Ceramics International, 2019, 45: 13847-13858.
[6] OZ F E, ERSOY N, MEHDIKHANI M, et al. Multi-instrument in-situ damage monitoring in quasi-isotropic CFRP laminates under tension[J]. Composite Structures, 2018, 196: 163-180.
[7] ZHOU W, ZHAO W Z, ZHANG Y N, et al. Cluster analysis of acoustic emission signals and deformation measurement for delaminated glass fiber epoxy composites[J]. Composite Structures, 2018, 195: 349-358.
[8] ZHAO G Q, ZHANG L, TANG C, et al. Experimental study on the torsion behavior of a 3D 4-directionally braided composite shaft using DIC and AE[J]. Polymer Testing, 2018, 72: 122-131.
[9] 周俊辰, 耿谦, 俸翔. 树脂基复合材料L型板承载性能及其破坏过程试验研究[J]. 强度与环境, 2020, 47(1): 41-48.
[10] 谭志勇, 姚磊江, 王淑玉, 等. 静力试验中C/SiC构件集成式热结构的AE特性及与材料测试的对比[J]. 复合材料学报, 2019, 36(6): 1464-1470.
[11] HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47: 329-334.
[12] HUHNE C, ZERBST A-K, KUHLMANN G, et al. Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models[J]. Composite Structures, 2010, 92(2): 189-200.
[13] GU J F, CHEN P H. Some modifications of Hashin’s failure criteria for unidirectional composite materials[J]. Composite Structures, 2017, 182: 143-152.
[14] ZHANG J Y, ZHOU L W, CHEN Y L, et al. A micromechanics-based degradation model for composite progressive damage analysis[J]. Journal of Composite Materials, 2016, 50(16): 2271-2287.
[15] ZHAO L B, YANG W, CAO T C, et al. A progressive failure analysis of all-C/SiC composite multi-bolt joints[J]. Composite Structures, 2018, 202: 1059-1068.
[16] HUANG M, LI Y M. X-ray tomography image-based reconstruction of microstructural finite element mesh models for heterogeneous materials[J]. Computational Materials Science, 2013, 67: 63-72.

含缺陷陶瓷基复合材料L形构件承载性能及破坏过程

The bearing capacity and the damage process of the ceramic matrix composites L-shaped specimens with defects

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

本文评价

[1]	张弘强, 陈栋, 李成. CFRP层合板双面挖补补片设计及性能分析[J]. 复合材料科学与工程, 2024, 0(2): 52-58.
[2]	林鹏, 姚刚, 罗剑岚, 王明, 蔡计杰, 惠述俭, 俞伊姗. 气密载荷下高铁司机室结构强度分析及优化[J]. 复合材料科学与工程, 2021, 0(1): 107-111.
[3]	李平, 颜廷俊, 李鹏, 丛日峰. 油气输送用玻璃纤维增强复合材料粘接柔性管内衬层厚度优化研究[J]. 复合材料科学与工程, 2020, 0(9): 17-24.
[4]	王敏, 李兴德. 陶瓷基复合材料火箭弹天线罩撞击玻璃纤维易碎盖的应力响应研究[J]. 复合材料科学与工程, 2020, 0(9): 25-28.
[5]	蒋传鸿, 张石强, 庞晓平, 谷端. 基于参数化建模的叶片叶根连接强度分析[J]. 复合材料科学与工程, 2020, 0(8): 32-37.
[6]	王凯, 熊晨曦, 贺强. 超轻复合材料机翼结构设计及成型技术研究[J]. 复合材料科学与工程, 2020, 0(4): 72-78.
[7]	黄昱翔, 黄向阳, 宋春生, 孙成. CFRP螺栓连接结构的渐进损伤研究和强度分析[J]. 复合材料科学与工程, 2020, 0(3): 44-52.
[8]	尹学智, 黄亚新, 林渊. 基于ABAQUS的碳纤维增强铝合金层合板的承载性能研究[J]. 玻璃钢/复合材料, 2019, 0(7): 39-47.
[9]	张绪, 汪厚冰, 于振波, 胡海威. 复合材料机身壁板机械连接的强度分析与验证[J]. 玻璃钢/复合材料, 2019, 0(7): 85-91.
[10]	陈旦, 祖磊, 许家忠, 刘美军. 干纱缠绕复合材料压力容器的结构设计与强度分析[J]. 玻璃钢/复合材料, 2019, 0(2): 5-12.
[11]	周玲珠, 郑愚, Susan.E.Taylor, 罗远彬. 结合压缩薄膜效应对BFRP筋自密实混凝土桥面板工作性能有限元分析[J]. 玻璃钢/复合材料, 2018, 0(5): 12-18.
[12]	陆铭慧, 段涵呓. 连续纤维增韧陶瓷基复合材料声学参量评价均匀性方法研究[J]. 玻璃钢/复合材料, 2016, 0(6): 37-43.
[13]	刘峰, 张中波, 张成雷. 法向载荷下含金属预埋件碳纤维层合板强度分析[J]. 复合材料科学与工程, 2013, 0(7): 19-23.
[14]	马永忠, 林金保, 吴烽华, 王超. Ti₃SiC₂/Al₂O₃陶瓷基复合材料支护托板结构优化设计[J]. 复合材料科学与工程, 2013, 0(4): 55-57.