准静态载荷作用下螺栓连接CARALL结构的损伤分析

doi:10.19936/j.cnki.2096-8000.20231028.012

复合材料科学与工程 ›› 2023, Vol. 0 ›› Issue (10): 87-93.DOI: 10.19936/j.cnki.2096-8000.20231028.012

准静态载荷作用下螺栓连接CARALL结构的损伤分析

张林涛^1,2, 杨涛^1,2*, 杜宇¹, 张金童¹

1.天津工业大学机械工程学院,天津300387;
2.天津市现代机电装备技术重点实验室,天津300387

收稿日期:2022-08-18 出版日期:2023-10-28 发布日期:2023-12-13
通讯作者: 杨涛(1970—),男,博士,教授,主要从事复合材料加工与检测方面的研究,yangtao@tiangong.edu.cn。
作者简介:张林涛(1997—),男,硕士研究生,主要从事复合材料结构强度及损伤检测方面的研究。
基金资助:
天津市自然科学基金(20JCQNJC00050)

Damage analysis of bolted CARALL structures under quasi-static loading

ZHANG Lintao^1,2, YANG Tao^1,2*, DU Yu¹, ZHANG Jintong¹

1. School of Mechanical Engineering, Tiangong University, Tianjin 300387; China;
2. Advanced Mechatronics Equipment Technology Tianjin Area Major Laboratory, Tianjin 300387, China

Received:2022-08-18 Online:2023-10-28 Published:2023-12-13

摘要/Abstract

摘要： 碳纤维增强铝合金层合板(CARALL)是一种较新的纤维金属层压材料。为研究CARALL层合板的螺栓连接性能,采用热压罐固化成型工艺制备试件,对其螺栓连接结构进行准静态拉伸试验。对接头在承受准静态拉伸载荷时的失效过程进行了讨论,失效模式涵盖铝合金塑性变形、碳纤维断裂和界面分层。针对CARALL各层的不同材料成分分别建立失效模型,并采用VUMAT子程序实现了基于三维Hashin失效准则对CFRP层的渐进损伤分析。试验与有限元预测的极限载荷相对误差为8.9%,且所提出的模型能较准确预测试件发生分层失效的位置,证明了该模型能够有效地预测碳纤维增强铝合金层合板单钉螺栓连接结构的力学性能。

关键词: 碳纤维增强铝合金层合板, 螺栓连接, 有限元模拟, 损伤分析

Abstract: Carbon fiber reinforced aluminum alloy laminate (CARALL) is a relatively new fiber-metal laminated material. To investigate the bolted joint performance of CARALL laminates, specimens were prepared by the hot press pot method of curing and molding process, and quasi-static tensile tests were conducted on their bolted structures. The failure processes of the joints subjected to quasi-static tensile loads were discussed, and the failure modes covered aluminum plastic deformation, carbon fiber fracture and interface delamination. The failure models were developed separately for different material compositions of each CARALL layer, and the VUMAT subroutine was used to realize the progressive damage analysis of the CFRP layer based on the 3D Hashin failure criterion. The relative error between the experimental and finite element predicted ultimate loads is 8.9%, and the proposed model can predict the location of delamination failure of the specimen more accurately, which proves that the model can effectively predict the mechanical properties of the single-nail bolted structure of the carbon fiber reinforced aluminum alloy laminate.

Key words: carbon fiber reinforced aluminum alloy laminate, bolted connection, finite element simulation, damage analysis

中图分类号:

TB333

张林涛, 杨涛, 杜宇, 张金童. 准静态载荷作用下螺栓连接CARALL结构的损伤分析[J]. 复合材料科学与工程, 2023, 0(10): 87-93.

ZHANG Lintao, YANG Tao, DU Yu, ZHANG Jintong. Damage analysis of bolted CARALL structures under quasi-static loading[J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(10): 87-93.

参考文献

[1] SINMAZGELIK T, AVCU E, BORA M O, et al. A review: Fibre metal laminates, background, bonding types and applied test methods[J]. Materials & Design, 2011, 32(7): 3671-3685.
[2] LIU J, LIU J, MEI J, et al. Investigation on manufacturing and mechanical behavior of all-composite sandwich structure with Y-shaped cores[J]. Composites Science & Technology, 2018, 159: 87-102.
[3] 曾鑫, 王小小, 平学成, 等. 纤维金属层板铆接孔微动疲劳性能优化及轻量化设计[J]. 复合材料科学与工程, 2022(3): 29-37.
[4] JAKUBCZAK P, BIENIAS J, DADEJ K. Experimental and numerical investigation into the impact resistance of aluminium carbon laminates[J]. Composite Structures, 2020, 244: 112319.
[5] DHALIWAL G S, NEWAZ G M. Experimental and numerical investigation of flexural behavior of carbon fiber reinforced aluminum laminates[J]. Journal of Reinforced Plastics and Composites, 2016, 35(12): 945-956.
[6] ASGHAR W, NASIR M A, QAYYUM F, et al. Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE[J]. Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(7): 1086-1100.
[7] JAKUBCZAK P, BIENIAS J, SUROWSKA B. Interlaminar shear strength of fibre metal laminates after thermal cycles[J]. Composite Structures, 2018, 206: 876-887.
[8] XU R, HUANG Y, LIN Y, et al. In-plane flexural behaviour and failure prediction of carbon fibre-reinforced aluminium laminates[J]. Journal of Reinforced Plastics and Composites, 2017, 36(18): 1384-1399.
[9] 黄腾, 张冬冬, 黄亚新,等. 碳纤维复材-铝合金双槽形截面层合板梁承载性能预测研究[J]. 工业建筑, 2021, 51(6): 198-206.
[10] YU G C, WU L Z, MA L, et al. Low velocity impact of carbon fiber aluminum laminates[J]. Composite Structures, 2015, 119: 757-766.
[11] LIN Y, HUANG Y, HUANG T, et al. Open-hole tensile behaviour and failure prediction of carbon fibre reinforced aluminium laminates[J]. Polymer Composites, 2018, 39(11): 4123-4138.
[12] XU P, ZHOU Z, LIU T, et al. Propagation of damage in bolt jointed and hybrid jointed GLARE structures subjected to the quasi-static loading[J]. Composite Structures, 2019, 218: 79-94.
[13] ZHANG J, ZHANG X. Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact[J]. Composite Structures, 2015, 125: 51-57.
[14] SHIN D K, KIM H C, LEE J J. Numerical analysis of the damage behavior of an aluminum/CFRP hybrid beam under three point bending[J]. Composites Part B: Engineering, 2014, 56: 397-407.
[15] 张成兴, 李言, 杨明顺, 等. Q235 钢薄板单点增量成形延性破损的有限元模拟[J]. 机械工程材料, 2017, 41(3): 67-72.
[16] 杨宇星, 鲍永杰, 王金龙, 等. 复合材料螺接力学行为精细化有限元分析方法[J]. 机械工程学报, 2022, 58(22): 198-207.

准静态载荷作用下螺栓连接CARALL结构的损伤分析

Damage analysis of bolted CARALL structures under quasi-static loading

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	贺利乐, 李书宝, 郑建校, 邵献忠. 考虑剪切非线性的复合材料层合板渐进损伤数值模拟[J]. 复合材料科学与工程, 2024, 0(1): 45-53.
[2]	牟浩蕾, 李仪, 宋东方, 解江, 冯振宇. 芳纶平纹编织复合材料平板弹道冲击特性及损伤分析[J]. 复合材料科学与工程, 2024, 0(1): 89-97.
[3]	王伟龙. CFRP螺栓连接力和温度耦合力学性能研究[J]. 复合材料科学与工程, 2023, 0(6): 120-127.
[4]	仇刚, 朱福先, 朱兴民, 徐先宜. 碳/玻混杂复合材料层合板单钉螺栓连接孔边应力分析[J]. 复合材料科学与工程, 2023, 0(3): 18-26.
[5]	高翔, 喻光安, 刘志强, 席振钊, 刘防防, 宋笑非, 秦志文. 复合材料风电叶片预埋螺栓套连接的轴向刚度分析[J]. 复合材料科学与工程, 2023, 0(11): 90-95.
[6]	余芬, 刘国峰, 何振鹏, 金伟, 黎柏春, 孙爱俊, 钱俊泽, 张桂昌. 热力耦合作用下复合材料沉头螺栓搭接结构渐进损伤研究[J]. 复合材料科学与工程, 2022, 0(3): 5-14.
[7]	王涛, 杨勇新. 低速冲击下复合材料组合板新型耗能模式研究[J]. 复合材料科学与工程, 2022, 0(2): 75-81.
[8]	孙毅刚, 马瑞云, 王轩, 程吉, 周春苹. 平纹编织面板蜂窝夹芯结构平拉性能研究[J]. 复合材料科学与工程, 2022, 0(11): 20-27.
[9]	李桦, 郑晖, 王共冬, 刘月, 要淞洋. 碳纤维复合材料低温下螺栓连接疲劳研究[J]. 复合材料科学与工程, 2021, 0(7): 17-21.
[10]	余芬, 刘国峰, 何振鹏, 黎柏春. 碳纤维增强复合材料沉头螺栓搭接结构强度及渐进损伤分析[J]. 复合材料科学与工程, 2021, 0(11): 12-20.
[11]	王鑫, 张骞, 费阳, 祖磊, 金书明, 许辉. 基于干法缠绕的固体火箭发动机壳体补强工艺研究[J]. 复合材料科学与工程, 2021, 0(11): 31-38.
[12]	余芬, 程吉, 王轩, 周春苹, 丁常方. 脱粘对平纹编织面板蜂窝夹芯结构侧压性能的影响[J]. 复合材料科学与工程, 2021, 0(1): 5-12.
[13]	黄尚洪, 陈忠丽, 刘平忠, 张雷达. 风电叶片叶根瓦模具的复合材料固化变形研究[J]. 复合材料科学与工程, 2021, 0(1): 47-51.
[14]	胡静, 蔡雄峰, 胡昂, 邓云飞. 金属网对玻璃纤维增强复合材料低速冲击损伤特性的影响[J]. 复合材料科学与工程, 2021, 0(1): 58-64.
[15]	贾子璇, 林松, 贾晓龙, 杨小平. 基于渐进损伤数值模拟的复合材料气瓶爆破压强优化[J]. 复合材料科学与工程, 2020, 0(8): 25-31.