热固性碳纤维预浸料单/双隔膜预成型对比及数值模拟

doi:10.19936/j.cnki.2096-8000.20240228.016

摘要/Abstract

摘要： 热隔膜成型工艺是一种快速成型预成型体的方法。为了对比单/双隔膜预成型工艺预成型体质量的差异,利用热隔膜成型装置成型具有双曲特征的C形预成型体,通过观察试验件褶皱产生的大小和位置评估成型温度、铺层顺序、铺层数、预成型体尺寸和成型工艺对预浸料成型质量的影响,同时建立了热隔膜成型仿真模型,并对仿真结果与试验结果进行对比。研究表明:铺层顺序对褶皱的产生有很大的影响,减少[45°/0°]铺层组合可以有效地减少褶皱产生,0°铺层在受压时容易诱导褶皱产生;预成型体越厚越容易产生成型缺陷;对于C形预成型体,采用双隔膜成型比单隔膜成型具有更好的成型质量,尤其对缘条位置褶皱的产生具有显著的抑制作用;基于ABAQUS建立的热隔膜成型仿真模型能较为准确地预测褶皱。

关键词: 热隔膜成型, 预浸料, 数值模拟, 褶皱, 预成型, 复合材料

Abstract: Hot diaphragm forming process is a method for rapid forming of preforms combining the advantages of automatic laying technology. In order to compare the difference of the preform formed by single and double diaphragm forming process, a hot diaphragm forming process device was used to form the C-type preform. The influence of temperature, layup sequence, number of layers, size of preforms and forming type on the quality of prepregs was evaluated by observing the size and position of the wrinkle. Moreover, the simulation model of hot diaphragm forming is established and compared with the experimental results. The results show that reducing the overlay combination of [45°/0°] can effectively reduce the wrinkle generation. 0° ply is easy to induce the generation of wrinkle when pressed. The thicker the preform is, the more likely it is to cause defects. For the C-shaped preform, the double diaphragm forming has better forming quality than the single diaphragm forming, especially in inhibiting the generation of wrinkle at the cap. Moreover, the thermal diaphragm forming simulation model based on ABAQUS can predict the wrinkle accurately.

Key words: hot diaphragm forming, prepreg, numerical simulation, wrinkle, preform, composites

中图分类号:

TB332

赵月青, 林德志, 陈萍, 汤家力. 热固性碳纤维预浸料单/双隔膜预成型对比及数值模拟[J]. 复合材料科学与工程, 2024, 0(2): 109-118.

ZHAO Yueqing, LIN Dezhi, CHEN Ping, TANG Jiali. Comparison and numerical simulation of single/double diaphragm forming of thermosetting carbon fiber prepreg[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 109-118.

参考文献

[1] CATTANACH J B, BARNS A J. Forming fiber-flastics composites: US 4657717[P]. 1987-04-14.
[2] 张宝成. 风力机热塑性叶片隔膜成型系统开发[D]. 呼和浩特: 内蒙古工业大学, 2014.
[3] 吴志恩. 复合材料热隔膜成型[J]. 航空制造技术, 2009(S2): 113-116.
[4] 黄彬瑶, 张君红. 热隔膜成型技术工艺进展研究[J]. 新材料产业, 2017, 10: 50-54.
[5] KEANE M A, MULHERN M B, MALLON P J. Investigation of the effects of varying the processing parameters in diaphragm forming of advanced thermoplastic composite laminates[J]. Composites Manufacturing, 1995, 6(3-4): 145-152.
[6] 杨霓虹, 杨洋, 余永波, 等. 大型民机复合材料C形梁预成型工艺初探[C]//中国国际复合材料科技大会. 北京: 中国复合材料学会, 2013.
[7] 姚双, 李敏, 顾轶卓, 等. 碳纤维复合材料C形结构热隔膜成型工艺[J]. 北京航空航天大学学报, 2013, 39(1): 95-99, 104.
[8] SUN J, GU Y Z, LI M, et al. Effect of forming temperature on the quality of hot diaphragm formed C-shaped thermosetting composite laminates[J]. Journal of Reinforced Plastics and Composites, 2012, 31(16): 1074-1087.
[9] 王永军, 杨凯, 陈森林, 等. 热固性碳纤维编织复合材料C形结构隔膜成型工艺[J]. 玻璃钢/复合材料, 2015(3): 59-65.
[10] 汪冬冬, 徐恒元, 龚志红, 等. 碳纤维复合材料梁/肋零件热隔膜成型工艺研究[J]. 玻璃钢/复合材料, 2016(10): 50-55.
[11] 李璐璐, 任亚辉, 孙松强, 等. 复合材料C型梁热隔膜成型影响因素分析[J]. 航空制造技术, 2020, 63(8): 93-100.
[12] 李文龙, 李希鹏, 张永冰. 复合材料工型长桁热隔膜成型工艺[J]. 飞机设计, 2019, 39(4): 56-59.
[13] HALLANDER P, AKERMO M, MATTEI C, et al. An experimental study of mechanisms behind wrinkle development during forming of composite laminates[J]. Composites Part A: Applied Science and Manufacturing, 2013, 50: 54-64.
[14] HALLANDER P, SJÖLANDER J, ÅKERMO M. Forming induced wrinkling of composite laminates with mixed ply material properties; An experimental study[J]. Composites Part A: Applied Science and Manufacturing, 2015, 78: 234-245.
[15] PANTELAKIS S G, BAXEVANI E A. Optimization of the diaphragm forming process with regard to product quality and cost[J]. Composites Part A: Applied Science and Manufacturing, 2002, 33(4): 459-470.
[16] DELALOYE S, NIEDERMEIER M. Optimization of the diaphragm forming process for continuous fibre-reinforced advanced thermoplastic composites[J]. Composites Manufacturing, 1995(6): 135-144.
[17] LABEAS G N, WATITI V B, KATSIROPOULOS C V. Thermomechanical simulation of infrared heating diaphragm forming process for thermoplastic parts[J]. Journal of Thermoplastic Composites, 2008, 21(4): 353-370.
[18] COGSWELL F N. The Processing science of thermoplastic structural composites[J]. International Polymer Processing, 1987, 1(4): 157-165.
[19] 黄莹. 复合材料热隔膜预成型工艺分析[J]. 机械设计与制造工程, 2015, 44(9): 20-22.
[20] SJÖLANDER J, HALLANDER P, ÅKERMO M. Forming induced wrinkling of composite laminates: A numerical study on wrinkling mechanisms[J]. Composites Part A: Applied Science and Manufacturing, 2016, 81: 41-51.
[21] 陈萍, 赵月青, 陈菲, 等. 单向碳纤维/环氧树脂预浸料叠层的面内变形行为[J]. 复合材料学报, 2020, 37(5): 1049-1055.