新型夹层结构研究进展

doi:10.19936/j.cnki.2096-8000.20240328.018

摘要/Abstract

摘要： 未来对重型运载火箭的需求日益迫切,在总载荷一定的情况下,携带货物重量提升,必定要降低火箭本体的重量,这就对现有的材料和结构提出了更高的要求。不以牺牲强度和功能性为代价,如何提升材料的有效载荷比成为重要挑战。目前最常见并且高效的方法,是通过设计和制备各种新型夹层结构,同时满足轻质、高强以及具备功能性的要求。本文总结了近些年来国内外夹层结构的研究进展,详细介绍了几种主要夹层结构的结构基础与特点,以及其各自的力学性能及多样的功能性,并提出了对我国夹层结构领域研究发展的建议。

关键词: 夹层结构, 轻质, 创新设计, 多功能性, 复合材料

Abstract: With the increasingly urgent demand for heavy launch vehicle in the future, under the condition of a certain total load, the weight of the carrying cargo must be reduced, which puts forward higher requirements for the existing materials and structures. Increasing the payload ratio of materials without sacrificing strength and functionality is a major challenge. At present, the most common and efficient method is through the design and fabrication of a variety of new sandwich structures, meeting the requirements of lightweight, high strength and functional. The paper summarizes the research progress of sandwich structures in China and abroad in recent years, introduces in detail the structural foundation and characteristics, mechanical properties and diverse functions of several sandwich structures, and puts forward some suggestions for the research and development of sandwich structures in our country.

Key words: sandwich structure, light, creative design, versatility, composite

中图分类号:

TB332

赵泽华, 张兆恒, 邢亚娟, 王博尧, 林嘉伦, 杨毅, 高坤. 新型夹层结构研究进展[J]. 复合材料科学与工程, 2024, 0(3): 121-128.

ZHAO Zehua, ZHANG Zhaoheng, XING Yajuan, WANG Boyao, LIN Jialun, YANG Yi, GAO Kun. Research progress of new sandwich structures[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(3): 121-128.

参考文献

[1] REN P, TAO Q Q, YIN L L, et al. High-velocity impact response of metallic sandwich structures with PVC foam core[J]. International Journal of Impact Engineering, 2020, 144: 103657.
[2] SCHAFER K, GOHLER C, TROLTZSCH J, et al. Textile-based surface design of thermoplastic composites for microstructural adhesion to polyurethane foams for lightweight structures[J]. Composite Interfaces, 2019, 26(4): 339-356.
[3] GRUNEWALD J, PARLEVLIET P P, MATCHINSKI A, et al. Mechanical performance of CF/PEEK-PEI foam core sandwich structures[J]. Journal of Sandwich Structures & Materials, 2019, 21(8): 2680-2699.
[4] LEE J C, PARK D H, JUNG H S, et al. Design for carbon fiber lamination of PMI foam cored CFRP sandwich composite applied to automotive rear spoiler[J]. Fibers Polymer, 2020, 21(1): 156-161.
[5] BUCKMANN T, STENGER N, KADIC M. Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography[J]. Advanced Materials, 2012, 24(20): 2710-2714.
[6] 骆伟, 谢伟, 刘敬喜. 复合材料波纹夹层结构低速冲击后的剩余弯曲承载能力[J]. 船海工程, 2018, 47(1): 51-54.
[7] XIONG J, DU Y T, MOUSANEZHAD D, et al. Sandwich structures with prismatic and foam cores: A review[J]. Sandwich Structures, 2019, 21(1): 1800036.
[8] WANG T, QIN Q H, WANG M S. Blast response of geometrically asymmetric metal honeycomb sandwich plate: Experimental and theoretical investigations[J]. International Journal of Impact Engineering, 2017, 105: 24-38.
[9] 戴耀, 孙琦, 刘凯. 不同夹层结构复合装甲的抗弹性能研究[J]. 装甲兵工程学院学报, 2007(6): 33-36.
[10] SCHAEDLER T A, CHAN L J, CLOUGH E C, et al. Nanocrystalline aluminum truss cores for lightweight sandwich structures[J]. Journal of Material, 2017, 69(8): 2626-2634.
[11] 李锐. 轻质高强类蜂窝夹层结构优化设计[D]. 湖北: 三峡大学, 2021.
[12] SHOKOOFEH D, MAHMOOD S. High velocity impact response of corrugated core composite sandwich structures[J]. Journal of Composite Materials, 2022, 56(16): 2559-2571.
[13] 丁若晨. 基于激光选区熔化的金属点阵结构力学性能研究[D]. 北京: 中国科学院大学, 2022.
[14] CHEON S, YU S, KIM K Y, et al. Improvement of interfacial bonding force between PMI foam and CFRP in PMI foam-cored CFRP sandwich composites[J]. Fibers Polymer, 2021, 22(8): 2281-2284.
[15] SIIVOLA J T, MINAKUCHI S, TAKEDA N. Effect of temperature and humidity conditions on polymethacrylimide (PMI) foam core material and indentation response of its sandwich structures[J]. Journal of Sandwich Structures & Materials, 2015, 17(4): 335-358.
[16] BEHNISCH F, BRUTSCH J, WERNER H O, et al. The direct sandwich composite molding (D-SCM) process: Sandwich manufacturing and characterization[J]. Journal of Composites Science, 2022, 6(3): 271-284.
[17] KOMOREK A, PRZYBYLEK P, SZCZEPANIAK R. The influence of low-energy impact loads on the properties of the sandwich composite with a foam core[J]. Polymers, 2022, 14(8): 1566-1584.
[18] JIA J L, YAN S. Fabrication and low-velocity impact response of pyramidal lattice stitched foam sandwich composites[J]. Science and Engineering of Composite Materials, 2020, 27(1): 245-257.
[19] HUSEYIN E Y, BULENT M I, TUBA A. Tensile and compressive performances of foam core sandwich composites with various core modifications[J]. Journal of Sandwich Structures & Materials, 2017, 19(1): 49-65.
[20] DU L, JIAO G Q, TAO H. Z-pin reinforcement on the core shear properties of polymer foam sandwich composites[J]. Journal of Composite Materials, 2009, 43(3): 289-300.
[21] DU L, JIAO G Q. Indentation study of Z-pin reinforced polymer foam core sandwich structures[J]. Composites Part A: Applied Science and Manufacturing, 2009, 40(6-7): 822-829.
[22] PRALL D, LAKES R S. Properties of a chiral honeycomb with a poisson's ratio of -1[J]. International Journal of Mechanical Sciences, 1997, 39(3): 305-314.
[23] LIRA C, INNOCENTI P, SCARPA F. Transverse elastic shear of auxetic multi re-entrant honeycombs[J]. Composite Structures, 2009, 90(3): 314-322.
[24] INGROLE A, HAO A, LIANG R. Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement[J]. Materials & Design, 2017, 117(5): 72-83.
[25] PATEL S, PATEL M. The efficient design of hybrid and metallic sandwich structures under air blast loading[J]. Journal of Sandwich Structures & Materials, 2022, 24(3): 1706-1725.
[26] ZHANG S, FAN T. Impact behaviour of hexagonal hierarchical honeycombs[J]. Journal of Sandwich Structures & Materials, 2022, 24 (3): 1597-1610.
[27] WANG Y, QIAN D, CHEN Y, et al. Effect of plate lattice-filling on the compressive mechanical property of 3D-printed square honeycombs[J]. Journal of Sandwich Structures & Materials, 2022, 24(3): 1580-1596.
[28] 高淑悦. 基于3D打印氧化锆陶瓷的夹层结构力学性能研究[D]. 上海: 上海应用技术大学, 2022.
[29] BOLLEN P, QUI N, HUYNEN I, et al. Multifunctional architectured materials for electromagnetic absorption[J]. Scripta Materialia, 2013, 68(1): 50-54.
[30] MING W, YU W, QIU K, et al. Modelling of the temperature distribution based on equivalent heat transfer theory and anisotropic characteristics of honeycomb core during milling of aluminum honeycomb core[J]. The International Journal of Advanced Manufacturing Technology, 2021, 115(8): 2097-2110.
[31] KANG D, ZOU P, WU H, et al. Study on ultrasonic vibration-assisted cutting of Nomex honeycomb cores[J]. The International Journal of Advanced Manufacturing Technology, 2019, 104(9): 979-992.
[32] VALDEVIT L, HUTCHINSON J W, EVANS A G. Structurally optimized sandwich panels with prismatic cores[J]. International Journal of Solids and Structures, 2004, 41(18-19): 5105-5124.
[33] 周昊, 郭锐, 南博华, 等. 填充式波纹夹层结构超高速撞击特性仿真[J]. 国防科技大学学报, 2017, 39 (2): 57-63.
[34] 孙浩, 赵晓昱. 复合材料波纹夹层结构弯曲性能研究[J]. 上海工程技术大学学报, 2020, 34(1): 76-80.
[35] XIA F K, PANG T, SUN G Y, et al. Longitudinal bending of corrugated sandwich panels with cores of various shapes[J]. Thin-Walled Structures, 2022, 173: 109001.
[36] FENG Y X, QIU H, GAO Y C. Creative design for sandwich structures: A review[J]. International Journal of Advanced Robotics Systems, 2020, 17(3): 1-24.
[37] LI W X, SUN F F, WEI W Y. Fabrication and testing of composite corrugated-core sandwich cylinder[J]. Composites Science and Technology, 2018, 156(3): 127-135.
[38] DU Z, ZHANG K. The hot bending and diffusion bonding of TiAl-based alloy for corrugated-core sandwich structure[J]. Journal of Materials Engineering and Performance, 2019, 28(3): 1986-1994.
[39] WANG T, GUO L. A realistic model for transverse shear stiffness prediction of composite corrugated-core sandwich structure with bonding effect[J]. Journal of Sandwich Structures & Materials, 2022, 24(1): 763-788.
[40] 李响, 李锐, 徐兴兴. 等. 新型变截面波纹夹层结构抗爆炸冲击性能[J]. 机械, 2020, 47(10): 6-15.
[41] VAKILIFARD A, MAZAHERI H, SHABAN M. Bending behavior and geometrical optimization of five-layered corrugated sandwich panels with equal in-plane principal stiffness[J]. Journal of Composite Materials, 2022, 56(17): 2739-2753.
[42] MAHER R, KHALILI S, ESLAMI F R. Experimental analysis of corrugated core sandwich panel with smart composite face-sheets under high-velocity impact[J]. Journal of Composite Materials, 2022, 56(10): 1495-1511.
[43] ZENG Y, LIU J X, ZHAO Y J. Experimental research on the repeated impacts behavior of aluminum corrugated-core sandwich structures[J]. Shock and Vibration, 2022, 14: 4644029.
[44] DALIRI V, ZEINEDINI A. Flexural behavoiur of the composite sandwich panels with novel and regular corrugated cores[J]. Apply Composite Material, 2019, 26(6): 963-982.
[45] LI H, GE L, LIU B, et al. An equivalent model for sandwich panel with double-directional trapezoidal corrugated core[J]. Journal of Sandwich Structures & Materials, 2020, 22(7): 2445-2465.
[46] YANG X F, MA J X, SHI Y L. Crashworthiness investigation of the bio-inspired bi-directionally corrugated core sandwich panel under quasi-static crushing load[J]. Materials & Design, 2017, 135: 275-290.
[47] XUE Z Y, HUTCHINSON J W. Preliminary assessment of sandwich plates subject to blast loads[J]. International Journal of Mechanical Sciences, 2003, 45(4): 687-705.
[48] CUI X D, ZHAO L M, WANG Z H. Dynamic response of metallic lattice sandwich structures to impulsive loading[J]. International Journal of Impact Engineering, 2012, 43: 1-5.
[49] 王晓鸿. C/SiC点阵夹层结构复合材料传热性能研究[D]. 哈尔滨: 哈尔滨理工大学, 2022.
[50] LIU J, CHEN T T, ZHANG Y H. On sound insulation of pyramidal lattice sandwich structure[J]. Composite Structures, 2019, 208:385-394.
[51] WANG Z, FU T, LI B. Acoustic response analysis of periodic orthogonal stiffened composite sandwich structure with pyramidal truss cores[J]. Journal of Sandwich Structures & Materials, 2022, 24(3): 1629-1652.
[52] WANG Y Z, MA L. Sound insulation performance of pyramidal truss core sandwich structure with frame[J]. Journal of Sandwich Structures & Materials, 2022, 24(2): 1245-1269.