关键词: 护岸管桩, 复合材料缠绕管, 四点弯曲试验, 嵌固端深度, 设计流程

Abstract: This paper proposes a new composite revetment pipe pile. The revetment pipe pile is made of composite winding pipe prepared by the fiber winding process. Through the four-point bending test, the failure mode and load-displacement relationship of the specimen were obtained, and the influence of winding angle ±55°, ±15° and whether concrete was poured on the bending performance of the revetment pipe pile was analyzed. The results show that the reduction of the fiber winding angle from 55° to 15° and the pouring of concrete can greatly improve the stiffness and bending bearing capacity of the composite revetment pipe pile. Then, the calculation formula of the embedded end depth of composite revetment pipe piles is derived on this basis, and the design process and application suggestions of revetment pipe piles are given. This provides a reference for the later application of composite revetment pipe piles in revetment projects.

Key words: revetment pipe piles, composite winding tubes, four-point bending test, embedded end depth, design process