阻尼层复合材料夹芯梁的动力学性能

doi:10.19936/j.cnki.2096-8000.20240528.004

复合材料科学与工程 ›› 2024, Vol. 0 ›› Issue (5): 25-29.DOI: 10.19936/j.cnki.2096-8000.20240528.004

阻尼层复合材料夹芯梁的动力学性能

赵晓军¹, 杨怡婷², 吴磊³

1.兰州信息科技学院土木工程学院,兰州730300;
2.天津滨海职业学院,天津300451;
3.武汉理工大学机电工程学院,武汉430070

收稿日期:2023-09-18 出版日期:2024-05-28 发布日期:2024-06-17
作者简介:赵晓军(1981—),男,学士,副教授,主要研究方向为复合材料动力学,zhxj01061051@163.com。
基金资助:
国家自然科学基金(52005376);2022年甘肃省高等教育教学成果培育项目(197)

Dynamic properties of damping layer composite sandwich beam

ZHAO Xiaojun¹, YANG Yiting², WU Lei³

1. Department of Civil Engineering, Lanzhou College of Information Science and Technology, Lanzhou 730300, China;
2. Tianjin Binhai Vocational College, Tianjin 300451, China;
3. School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China

Received:2023-09-18 Online:2024-05-28 Published:2024-06-17

摘要/Abstract

摘要： 采用哈密尔顿原理,推导得到了阻尼层复合材料夹芯梁的偏微分振动平衡方程;使用Navier型闭环解得到梁的固有频率和损耗因子,并与其他文献中的解进行对比验证;最终揭示了夹芯复合材料梁动力学性能随结构参数的变化。结果表明:随着梁长度的增大,梁的固有频率逐渐减小,结构的损耗因子呈现先增大后减小的趋势,梁的长度存在最佳动力学设计值;增大阻尼层剪切模量,结构固有频率逐渐增大,结构的损耗因子呈现先增大后减小的趋势,阻尼层剪切模量也存在最佳动力学设计值;随阻尼层厚度的增大,结构的固有频率逐渐降低,一阶模态下的损耗因子逐渐增大,但是其余模态下的损耗因子呈现先变小后增大的规律;中间层损耗因子值对频率的影响不大。

关键词: 经典梁理论, 铁木辛柯梁理论, 阻尼层, 复合材料梁, 动力学性能

Abstract: The partial differential vibration equations of damping layer composite sandwich beam were deduced combined with the principle of Hamiltons Principle. Then, these vibration equations were solved by means of the closed-form Navier method, and the calculated result was validated versus the data of the published literature. Finally, the influence of changing parameters of the damping layer composite beam on its dynamic properties was studied. The results show that: The natural frequency decreases gradually and the loss factor tends to go from ascent to descent with the increase of length of beam, and there is an optimal value of length in the dynamics design. The natural frequency increases gradually and the loss factor tends to go from ascent to descent as the shear modulus of the damping layer is increased, and there is an optimal value of shear modulus in the dynamics design. With the increase of thickness of damping layer, the natural frequency decreases gradually, the first-order loss factor increases gradually and the other loss factors tend to go from descent to ascent. The loss factor of damping layer has less influence on the natural frequencies.

Key words: classical beam theory, Timoshenko beam theory, damping layer, composite beam, dynamic properties

中图分类号:

TB332

赵晓军, 杨怡婷, 吴磊. 阻尼层复合材料夹芯梁的动力学性能[J]. 复合材料科学与工程, 2024, 0(5): 25-29.

ZHAO Xiaojun, YANG Yiting, WU Lei. Dynamic properties of damping layer composite sandwich beam[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(5): 25-29.

参考文献

[1] 曹丰, 曾志勇, 黄建, 等. 连续纤维增强复合材料的3D打印工艺及应用进展[J]. 中国科学: 技术科学, 2023, 53(11): 1815-1833.
[2] 薛忠民, 王占东, 尹证. 中国工业复合材料发展回顾与展望[J]. 复合材料科学与工程, 2021(6): 119-128.
[3] 宁莉, 杨绍昌, 冷悦, 等. 先进复合材料在飞机上的应用及其制造技术发展概述[J]. 复合材料科学与工程, 2020(5): 123-128.
[4] 余云燕, 孔嘉乐. 单桩基础海上风机横向自振频率求解及参数敏感性分析[J]. 振动与冲击, 2023, 42(10): 82-91, 164.
[5] PENG X, XU J, CHENG Y, et al. The effect of curing deformation on the vibration behavior of laminated composite beams[J]. Composite Structures, 2021, 277: 114642.
[6] MOJTABA G A, MOHAMMAD G, ELNAZ Z. Development of spectral element method for free vibration of axially-loaded functionally-graded beams using the first-order shear deformation theory[J]. European Journal of Mechanics-A/Solids, 2022, 96: 104759.
[7] 万泽青, 李世荣. 深梁弯曲解的一种经典化表示[J]. 力学季刊, 2022, 43(4): 992-1000.
[8] ADESSINA A, HAMDAOUI M, XU C, et al. Damping properties of bi-dimensional sandwich structures with multi-layered frequency-dependent visco-elastic cores[J]. Composite Structures, 2016, 154: 334-343.
[9] VIDAL P, POLIT O. Vibration of multilayered beams using sinus finite elements with transverse normal stress[J]. Steel Construction, 2010, 92(6): 1524-1534.
[10] PAVAN G S, MUPPIDI H, DIXIT J, et al. Static, free vibrational and buckling analysis of laminated composite beams using isogeometric collocation method[J]. European Journal of Mechanics-A/Solids, 2022, 96: 104758.
[11] GOYAL V K, KAPANIA R K. A shear-deformable beam element for the analysis of laminated composites[J]. Finite Elements in Analysis & Design, 2007, 43(6-7): 463-477.
[12] ZHEN W, CHEN W. An assessment of several displacement-based theories for the vibration and stability analysis of laminated composite and sandwich beams[J]. Composite Structures, 2008, 84(4): 337-349.
[13] WEN J, SHEIKH A H, BRIAN A U. An analytical model for flexural vibration of composite beams with shear slip based on third order deformation kinematics[J]. Structures, 2022, 38: 1483-1501.
[14] NANDA N, KAPURIA S. Spectral finite element for wave propagation analysis of laminated composite curved beams using classical and first order shear deformation theories[J]. Composite Structures, 2015, 132: 310-320.
[15] JAFARI A, EZZATI M, ATAI A A. Static and free vibration analysis of Timoshenko beam based on combined peridynamic-classical theory besides FEM formulation[J]. Computers & Structures, 2019, 213: 72-81.
[16] ZHAI Y, MA J, YAN Y, et al. Thermal buckling and free vibration of composite sandwich curved panels[J]. Composite Structures, 2021, 267(108): 113869.
[17] TANG S J, LUMSDAINE A. Analysis of constrained damping layers, including normal-strain effects[J]. AIAA Journal, 2008, 46(12): 2998-3011.
[18] 翟彦春. 嵌入阻尼膜的共固化复合材料结构动力学性能[D]. 青岛: 青岛理工大学, 2021.
[19] 乐治济, 孙飞飞, 蔡小莹. 约束阻尼控制锥筒塔架的阻尼特性分析与试验研究[J]. 力学季刊, 2023, 44(4): 867-880.
[20] UNGAR E E, KERWIN J E M. Loss factors of viscoelastic systems in terms of strain energy[J]. Acoustic Society of America, 1962, 34(2): 954-962.

阻尼层复合材料夹芯梁的动力学性能

Dynamic properties of damping layer composite sandwich beam

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	马国瑞, 梁森, 杨功先. 双层阻尼薄膜夹嵌复合材料梁的动力学性能[J]. 复合材料科学与工程, 2022, 0(9): 11-22.
[2]	王光和, 梁森, 周运发, 郑长升. 嵌入式阻尼环筋开口圆柱壳的振动性能分析[J]. 复合材料科学与工程, 2020, 0(2): 54-61.
[3]	詹超,马晓静,张芝芳. 纤维增强复合材料梁的分层损伤识别[J]. 玻璃钢/复合材料, 2017, 0(9): 5-12.
[4]	于湛卉, 杨涛, 牛雪娟, 杜宇. 基于模态柔度曲率改变率复材简支梁结构损伤识别研究[J]. 复合材料科学与工程, 2015, 0(2): 11-15.