湿热环境对T800S/M21碳纤维复合材料基体主导力学性能的影响研究

doi:10.19936/j.cnki.2096-8000.20240528.014

复合材料科学与工程 ›› 2024, Vol. 0 ›› Issue (5): 100-106.DOI: 10.19936/j.cnki.2096-8000.20240528.014

湿热环境对T800S/M21碳纤维复合材料基体主导力学性能的影响研究

陈程, 李晨, 王岩, 高丽敏, 徐吉峰

中国商飞北京民用飞机技术研究中心民用飞机结构与复合材料北京市重点实验室,北京102200

收稿日期:2023-04-23 出版日期:2024-05-28 发布日期:2024-06-17
作者简介:陈程(1986—),男,博士,高级工程师,主要从事飞机结构强度与材料评价技术方面的研究,dch.chen@yahoo.com。
基金资助:
山西省科技重大专项计划“揭榜挂帅”项目(202101040201003)

Research on the influence of hygro-thermal effects on matrix-dominated mechanical properties of T800S/M21 CFRP composites

CHEN Cheng, LI Chen, WANG Yan, GAO Limin, XU Jifeng

Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, COMAC Beijing Aircraft Technology Research Institute, Beijing 102200, China

Received:2023-04-23 Online:2024-05-28 Published:2024-06-17

摘要/Abstract

摘要： 以T800S/M21碳纤维复合材料为研究对象,在三种吸湿调控与两种试验温度的湿热环境组合下,开展90°拉伸、±45°拉伸以及Ⅰ型与Ⅱ型层间断裂等基体主导力学性能影响试验。研究了湿热环境对基体拉伸及面内剪切模量与强度的影响,获得了湿热环境对层间性能G_Ⅰc与G_Ⅱc的影响。基于±45°拉伸与裂纹观察试验,获得了剪切刚度退化与厚度面裂纹数量演化规律,并分析了吸湿调控对引起剪切刚度退化的损伤机理影响。结果表明:湿热环境对T800S/M21复合材料基体主导的拉伸与剪切性能产生显著的折减影响,也对层间性能产生退化影响。湿热环境对面内剪切非线性特征产生一定弱化影响,吸湿加速了宏观裂纹产生与剪切刚度退化进程,导致宏观裂纹产生了比微观裂纹更加显著的刚度折减贡献。

关键词: 碳纤维复合材料, 面内剪切性能, 湿热环境, 损伤机理

Abstract: This work studies the hygro-thermal effects on matrix-dominated mechanical properties of T800S/M21 CFRP laminates. Experimental tests are performed on 90°and ±45° laminate test coupons to investigate the hygro-thermal effects on matrix dominated tension and shear mechanical behaviors. Laminate interface properties under fracture mode Ⅰ and mode Ⅱ considering different hygro-thermal conditions are evaluated by DCB and ENF tests. Based on ±45° tension test, crack density on specimen edge is measured to support the analysis of shear modulus degradation and crack density evolution under different moisture absorption conditions. In conclusion: Hygro-thermal conditions show significant effects on matrix dominated in-plane and interface properties. The nonlinear response of in-plane shear is strongly dependent on hygro-thermal conditions. Test results show that moisture absorption accelerates the crack density evolution and shear modulus degradation, and moisture content plays an important role in the contribution of crack density to the shear modulus reduction.

Key words: CFRP composite, in-plane shear performance, hygro-thermal effects, damage mechanism

中图分类号:

TB332

陈程, 李晨, 王岩, 高丽敏, 徐吉峰. 湿热环境对T800S/M21碳纤维复合材料基体主导力学性能的影响研究[J]. 复合材料科学与工程, 2024, 0(5): 100-106.

CHEN Cheng, LI Chen, WANG Yan, GAO Limin, XU Jifeng. Research on the influence of hygro-thermal effects on matrix-dominated mechanical properties of T800S/M21 CFRP composites[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(5): 100-106.

参考文献

[1] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1): 1-12.
[2] 卡萨波格罗. 飞机复合材料结构设计与分析[M]. 上海: 上海交通大学出版社, 2011.
[3] ABRATE S. Impact engineering of composite structures[M]. Springer Science & Business Media, 2011.
[4] MERCIER J, BUNSELL A, CASTAING P, et al. Characterisation and modelling of aging of composites[J]. Composites Part A: Applied Science and Manufacturing, 2008, 39(2): 428-438.
[5] KIM H S, WANG W X, TAKAO Y. Effects of temperature and stacking sequence on the mode Ⅱ interlaminar fracture behavior of composite laminates[C]//Key Engineering Materials. Trans Tech Publications Ltd., 2000: 815-820.
[6] TODO M, NAKAMURA T, TAKAHASHI K. Effects of moisture absorption on the dynamic interlaminar fracture toughness of carbon/epoxy composites[J]. Journal of Composite Materials, 2000, 34(8): 630-648.
[7] MARTIN R. Ageing of Composites[M]. CRC press, 2008.
[8] KUMAR S B, SRIDHAR I, SIVASHANKER S. Influence of humid environment on the performance of high strength structural carbon fiber composites[J]. Materials Science and Engineering: A, 2008, 498(1-2): 174-178.
[9] DONADON M V, IANNUCCI L, FALZON B G, et al. A progressive failure model for composite laminates subjected to low velocity impact damage[J]. Computers & Structures, 2008, 86(11-12): 1232-1252.
[10] ROUCHON J. Certification of large airplane composite structures[C]//ICAS Congress Proceedings. 1990: 1439-1447.
[11] CHEN C. Contribution à la prise en compte des effets de l’environnement sur la tolérance aux dommages d’impact de stratifiés composites[D]. Toulouse: ISAE, 2015.
[12] MATZENMILLER A, LUBLINER J, TAYLOR R L. A constitutive model for anisotropic damage in fiber-composites[J]. Mechanics of Materials, 1995, 20(2): 125-152.
[13] KIM E H, RIM M S, LEE I, et al. Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates[J]. Composite Structures, 2013, 95: 123-134.
[14] LAGATTU F, LAFARIE-FRENOT M C. Variation of PEEK matrix crystallinity in APC-2 composite subjected to large shearing deformations[J]. Composites Science and Technology, 2000, 60(4): 605-612.
[15] LADEVÉZE P, LUBINEAU G. On a damage mesomodel for laminates: Micro-meso relationships, possibilities and limits[J]. Composites Science and Technology, 2001, 61(15): 2149-2158.
[16] NAIRN J A. Matrix microcracking in composites[J]. Polymer Matrix Composites, 2000, 2: 403-432.

湿热环境对T800S/M21碳纤维复合材料基体主导力学性能的影响研究

Research on the influence of hygro-thermal effects on matrix-dominated mechanical properties of T800S/M21 CFRP composites

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	吕伟, 文学, 付为刚, 唐靖昆. 基于Lamb波和改进贝叶斯融合算法的CFRP边缘分层损伤分析[J]. 复合材料科学与工程, 2024, 0(5): 114-120.
[2]	张智梅, 马嘉辰. 湿热环境下外贴CFRP加固RC梁抗弯性能有限元分析[J]. 复合材料科学与工程, 2024, 0(4): 76-82.
[3]	苏桐, 胡果馨, 刘振. 全碳纤维复合材料太阳能无人机机翼结构优化设计[J]. 复合材料科学与工程, 2024, 0(3): 79-83.
[4]	伍强, 赵凯, 刘鹏飞, 张涛涛, 朱德勇. Z形纤维增强复合材料层压板固化变形分析[J]. 复合材料科学与工程, 2024, 0(3): 84-90.
[5]	韩善灵, 王涛, 光新杰, 李志勇, 李勇. CFRP在汽车轻量化与安全中的应用进展[J]. 复合材料科学与工程, 2024, 0(2): 119-128.
[6]	杨威亚, 高东晨, 铁瑛, 张臻臻, 葛超坤. 基于多尺度分析的EMAA自修复缝线复合材料层间增韧作用研究[J]. 复合材料科学与工程, 2023, 0(9): 29-35.
[7]	张克群, 孙会来, 李航, 邢文涛, 赵方方. CFRP套料钻制孔工艺及轴向力预测研究[J]. 复合材料科学与工程, 2023, 0(9): 85-91.
[8]	曹雨函, 郭姝含, 欧阳俊杰, 孔繁淇, 王付胜. 高温预损伤对碳纤维复合材料冲击后压缩剩余强度影响规律研究[J]. 复合材料科学与工程, 2023, 0(6): 30-36.
[9]	毕一凡, 程宝发, 朱祥东. 聚酰胺6/氧化石墨烯改性碳纤维复合材料机械性能与导热性能研究[J]. 复合材料科学与工程, 2023, 0(3): 34-38.
[10]	胡业发, 孟由, 张锦光, 邓伟, 徐胜风. 含夹杂缺陷碳纤维复合材料层压板的无损检测与评估研究[J]. 复合材料科学与工程, 2023, 0(2): 94-100.
[11]	徐胜风, 胡业发, 张锦光, 杨继, 袁春辉, 孟由. 起重机伸缩臂架CFRP轻量化材料的摩擦磨损试验研究[J]. 复合材料科学与工程, 2023, 0(2): 101-106.
[12]	刘亚婷, 解江, 牟浩蕾, 冯振宇. 碳/芳纶纤维混杂复合材料层合板弹道冲击特性研究[J]. 复合材料科学与工程, 2023, 0(12): 96-104.
[13]	崔开心, 卢翔, 赵耀斌. 补片搭接长度对修理层合板湿热振动特性的研究[J]. 复合材料科学与工程, 2023, 0(11): 12-20.
[14]	李磊, 曹东风, 冀运东, 刘鹏飞, 谭永青, 陈剑平. 三维自动光学检测设备CFRP光学系统挂架的制备及固有频率分析[J]. 复合材料科学与工程, 2023, 0(1): 70-76.
[15]	赵迅鹏, 孙双双, 王洋. 湿热环境下玻/碳纤维混杂复合材料弯曲强度的宏观力学分析[J]. 复合材料科学与工程, 2022, 0(9): 41-47.