引发剂、阻聚剂及促进剂对DMC固化性能及存放期的影响

玻璃钢/复合材料 ›› 2007, Vol. 196 ›› Issue (6): 38-39.

引发剂、阻聚剂及促进剂对DMC固化性能及存放期的影响

常熟理工学院化学与材料工程系江苏常熟215500

出版日期:2007-11-28 发布日期:2007-06-25

INFLUENCES OF INITIATOR,INHIBITOR AND ACCELERATOR ON CURING PROPERTY AND STORING TIME FOR DOUGH MOULDING COMPOUND

Online:2007-11-28 Published:2007-06-25

摘要/Abstract

摘要：

本文研究引发剂、阻聚剂及促进剂对DMC固化性能及存放期的影响。研究结果表明,联用引发剂过苯甲酸叔丁酯和过辛酸叔丁酯,既不影响固化性能,又可提高生产效率。此外还可通过阻聚剂对苯二酚或促进剂异辛酸钴来调节固化速度和存放时间,不仅缩短固化时间,而且也保证模塑料有一定的存放时间,并可降低成本。

关键词: DMC, 引发剂, 阻聚剂, 促进剂, 固化性能, 存放期

Abstract:

In this paper,influences of initiator,inhibitor and accelevator on curing property and storing time for dough moulding compound are studied.The combination of two initiators such as ertbutyl perbenzoate and ttertbutyl peroctoate,not only improved the production efficiency but also ensured the curing property.In addition,the curing time is shortened,the storing time is ensured and the cost of production is reduced by the addition of hydroquinone or cobalt 2-ethylcaproate.

Key words: DMC, initiator, inhibitor, accelerator, curing property, store time

俞丽珍. 引发剂、阻聚剂及促进剂对DMC固化性能及存放期的影响[J]. 玻璃钢/复合材料, 2007, 196(6): 38-39.

Yu, L. Z. . INFLUENCES OF INITIATOR,INHIBITOR AND ACCELERATOR ON CURING PROPERTY AND STORING TIME FOR DOUGH MOULDING COMPOUND[J]. Fiber Reinforced Plastics/Composites, 2007, 196(6): 38-39.

[1]	钱建华, 陈玲, 刘世强. 一种油罐用混杂型光固化预浸料性能研究[J]. 玻璃钢/复合材料, 2020, 0(1): 72-75.
[2]	陈尚能, 申明霞, 陆凤玲, 曾少华. MCNTs对乙烯基酯树脂固化及其拉挤玻纤复合材料层间粘合性能影响[J]. 玻璃钢/复合材料, 2018, 0(8): 55-60.
[3]	蒋民强,程超,张辉,余木火. 聚醚砜/环氧树脂共混体系流变特性与固化性能的研究[J]. 玻璃钢/复合材料, 2018, 0(3): 33-37.
[4]	孙超明, 张翠妙, 谈娟娟, 杨凯. 国产RTM 用碳纤维及环氧树脂基本性能研究[J]. 复合材料科学与工程, 2013, 0(9): 35-38.
[5]	柴红梅, 汪鹏, 王雷, 孙超明. 固化剂含量对RTM用环氧树脂体系固化性能的影响[J]. 玻璃钢/复合材料, 2009, 205(6): 48-49.