玻璃钢/复合材料 ›› 2008, Vol. 198 ›› Issue (6): 24-27.

• 材料研究 • 上一篇    下一篇

聚倍半硅氧烷树脂/石英纤维复合材料耐高温性能研究

  

  1. 北京化工大学材料科学与工程学院胶结材料与原位固化技术研究室
  • 出版日期:2008-11-28 发布日期:2008-06-25
  • 基金资助:

    北京市重点学科共建项目(XK100100640)

STUDY ON HIGH-TEMPERATURE RESISTANCE OF SILICONE RESIN/SILICA FIBERS COMPOSITES IN ANTENNA MASK

  • Online:2008-11-28 Published:2008-06-25

摘要:

研究了有机硅树脂/石英纤维复合材料的拉伸性能、耐高温性能和介电性能。研究结果表明,纤维预处理方式对纤维和复合材料力学性能有较大影响。采用甲苯浸泡,继而350℃高温加热400s可在获得较好纤维强度的前提下除去浸润剂。复合材料经热处理后仍能保持很好的力学强度和介电性能,550℃处理后,拉伸强度达到了360MPa以上,介电常数仍在3.30以下,满足导弹天线罩用复合材要求。

关键词: 雷达天线罩, 石英纤维, 复合材料, 高温性能

Abstract:

The tensile property,high-temperature resistance and dielectric property of silicone resin/silica fiber composites were studied.Results showed that pretreatment methods of fiber had important influence on the tensile property of fiber and composites.Agent on the surface of fiber could be removed completely by way of dipping in tol- uene and then heating at 350℃for 400 seconds,meanwhile keeping an acceptable tensile strength of silica fiber. The composites could keep excellent mechanical and dielectric properties after high temperature heat treatment.The tensile strength of the composites was over 360MPa and the dielectric constant was below 3.30,which met the re- quirements of antenna mask.

Key words: antenna mask, silica fibers, composites, high temperature properties