［1］ Jeffery G.B.. The motion of rigid particles in a shear flow an low Reynolds Number［J］.Journal of Fluid Mechanics,1922,(14): 284304.
［2］ Givler R C., Crochet M J., Pipes R B.. Numerical Prediction of Fibre Orientation in Dilute Suspensions［J］. J.Compos. Mater., 1983, 17: 330343.
［3］ Folgar F., Tucker C.L. A Phonomeno logical Model for Concentrated Fibre Suspensions［J］. J.Plast. Compos., 1984, 3: 98111.
［4］ Bibbo M A., Dinh S M., Armstrong R C.. A rheological equation state for semiconcentrated fibre suspensions［J］. J. Reol, 1985:29905.
［5］ Doraiswamy D.,  Metzner A B.. The Rheology of Polymeric Liquid Crystals［J］. J. Rheol Acta.,1986:25580.
［6］ Folgar F., Tucker C.L..Orientation Behavior of fibers in concentrated suspensions［J］．J. Plast. Compos.,1984,3:98119.
［7］ Advani S.G, Tucker C.L.. The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites ［J］.Polymer compos.,1990:11164.
［8］ Stover C A, Koch DL, Cohen C.. Observations of fiber orientation in simple shear flow of a semidilute suspension［J］. Journal of Fluid Mechanics, 1992,238:277296.
［9］ Dihn S M, Armstrong R C..A Rheological Equation State for Semiconcentrated Fiber Suspensions［J］. Journal of Reinforced Plastics and Composites, 1984,3(2):98119.
［10］ 周持兴，俞炜．聚合物加工理论［M］.北京：科学出版社，2004.
［11］ Givler R.C., Crochet M.J. and Pipes R.B.. Numerical Prediction for Fiber Orientation in Dilute Suspensions［J］. J. Compos. Mat.,  1983,17(6): 330343.
［12］ ALTAN M C., SUBBIAH S.. Numerical prediction of threedimensional fiber orientation in HeleShaw flows ［J］. Polymer Engineering Science, 1990, 30: 848859.
［13］ H Henry De Frahan, V. Verleye, F. Dupret,et al. Numerical prediction of fiber orientation in injection molding Polymer ［J］. eng&sci, 1992,32(4):254.
［14］ BAY R S, TUCKER C L. Fiber orientation in simple injection moldings［J］. Polymer Composites, 1992, 13: 317321.
［15］ Seok Won Lee, Jae Ryoun, Jae Chun Hyun. Prediction of fiber orientation structure for injection molded short fiber composites［J］.  Mat Res Innovat, 2002,6:189197.
［16］ E. G. Kim, J. K. Park, S. H. Jo. A study on fiber orientation during the injection molding of fiberreinforced polymeric composites［J］. Journal of Materials Processing Technology, 2001,111(1-3):225232.
［17］ 郭和忠，周持兴．注射成型时纤维取向的计算机模拟［J］．高分子材料科学与工程，1993，9(6)：4853.
［18］ 林兰芬,董金祥. 纤维增强塑料的充模流动和纤维取向的耦合仿真模型［J］.化工学报,1999,50(4) ：443448.
［19］ 林兰芬. 短纤维增强塑料注射成型中三维纤维取向的数值预测［J］.材料科学与工艺,1998,16(2) ：2831.
［20］ 陈兴，李德群．注塑成型流动过程中的纤维定向分析［J］．华中理工大学学报，1997，25(3)：6365.
［21］ 张红平，欧阳杰，刘德峰等．纤维悬浮聚合物熔体中纤维影响的数值模拟［J］．化工学报，2007，58(8)：20942102.
［22］ 上官林建，申长雨，刘保臣．剪切场作用下短纤维复合材料纤维取向的耗散粒子动力学研究［J］．功能材料，2009，41(1)：1013.
［23］ 钟明强，濮阳楠，益小苏等．短玻纤增强聚丙烯注射压力对微观结构和力学性能影响［J］．复合材料学报，2000，17(4)：610.