纤维环向缠绕复合材料气瓶冲击阻抗性能研究

复合材料科学与工程 ›› 2013, Vol. 0 ›› Issue (1): 65-72.

纤维环向缠绕复合材料气瓶冲击阻抗性能研究

张永明, 李培宁

华东理工大学,上海200237

收稿日期:2012-04-09 出版日期:2013-01-28 发布日期:2022-03-11
作者简介:张永明(1957-),男,博士,高级工程师,主要从事压力容器安全技术及复合材料结构强度等方面研究。
基金资助:
国家质检总局项目(2011QK398)

IMPACT RESISTANCE OF FIBER HOOP-WRAPPED COMPOSITE CYLINDERS

ZHANG Yong-ming, LI Pei-ning

East China University of Science and Technology,Shanghai 200237,China

Received:2012-04-09 Online:2013-01-28 Published:2022-03-11

摘要/Abstract

摘要： 新能源汽车用复合材料气瓶采用复合材料/金属混杂结构,其冲击损伤特性与采用纯复合材料结构有很大的不同,本文结合复合材料气瓶和试板模拟试验,采用冲击能量吸收率、分层损伤扩展阻力、剩余强度比衰减指数等参数作为其冲击阻抗性能的评价指标。采用不同的支撑夹具对玻纤/环氧单向板进行落球冲击试验,以模拟复合材料气瓶的不同材质内胆对纤维缠绕层冲击损伤的影响。研究发现,在一定冲击能量作用下,改变复合材料/金属混杂结构的形式能使其冲击能量吸收率发生变化,并可提高层合板的冲击损伤临界值,即提高其冲击承载能力; 冲击能量吸收率越高分层损伤扩展阻力越小,且含冲击损伤层合板的剩余强度衰减越快。因此在设计复合材料气瓶时,需要考虑复合材料/金属混杂结构对分层损伤扩展阻力和冲击能量吸收率的影响。

关键词: 复合材料气瓶, 冲击阻抗性能, 评价参数

Abstract: The composite / metal hybrid structure is widely used in composite cylinders of new energy vehicles, which has different impact damage characteristics compared with pure composite structure． This paper,combining both the tests of composite cylinder and test panel,evaluates impact resistance performance with parameters such as: impact energy absorption rate,delamination extension resistance and attenuation factor of the residual strength ratio． The experiments of falling ball impact with various support fixtures and glass fiber /epoxy unidirectional laminates are carried out to simulate how different liner materials of composite cylinders affect the impact damage degree of fiber winding layers． It is found that,under certain impact energy,changing composite / metal hybrid structure leads to the change of impact energy absorption rate and increases critical value of impact damage,namely,bear load impact capacity． The higher impact energy absorption rate will reduce delamination extension resistance,and the residual strength of laminate with impact damage will attenuate faster． As a result,the effect of delamination extension resistance and impact energy absorption rate should be taken into consideration while designing composite cylinders．

Key words: composite cylinders, impact resistance, evaluation parameters

中图分类号:

TB332

张永明, 李培宁. 纤维环向缠绕复合材料气瓶冲击阻抗性能研究[J]. 复合材料科学与工程, 2013, 0(1): 65-72.

ZHANG Yong-ming, LI Pei-ning. IMPACT RESISTANCE OF FIBER HOOP-WRAPPED COMPOSITE CYLINDERS[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(1): 65-72.

参考文献

[1] N. -M. Barkoula J. Karger-Kocsis, et al. Prediction of the residual tensile strength after solid particle erosion of UD-GF/PP composites[J]. Journal of Composite Materials, 2002, 36: 1745-1756.
[2] G. C. Papanicolaou, Chr. D. Stavropoulos. New approach for residual compressive strength prediction of impacted CFRP laminates[J]. Composites, 1995, 26(7): 517-523.
[3] 沈真张子龙等. 复合材料损伤阻抗和损伤容限的性能表征[J]. 复合材料学报, 2004, 21(5): 140-145.
[4] Lee, S. M. Zahuta, P.Instrumented impact and static indentation of composites[J]. J Composite Mater, 1991, (25): 204-222.
[5] Choi, H. Y., Downs, R. J. and Chang, F. K.A new approach toward understanding damage mechanisms and mechanics of laminated composites due to low-velocity impact: part I-experiments[J]. Composite Mater, 1991, (25): 992-1011.
[6] 沈真, 杨胜春, 陈普会. 复合材料层压板抗冲击行为及表征方法的实验研究[J]. 复合材料学报, 2008, 25(5): 125-132.
[7] 罗靓, 沈真等. 炭纤维增强树脂基复合材料层合板低速冲击性能实验研究[J]. 复合材料学报, 2008, (6): 20-24.
[8] ASTM D3878-04a, Standard terminology for composite materials[S].
[9] 沈真, 杨胜春等. 评定复合材料抗冲击和损伤性能的研究[J]. 结构强度研究, 2003, (2): 7-14.
[10] Jang-kyo kim, D. B. Mackayet al. Drop-weight impact damage tolerance of CFRP with rubber-modified epoxy matrix[J]. Composites, 1993, 24(6): 485-494.
[11] 宁荣昌王孝忠. 环氧玻璃钢层合板低速冲击损伤特性的研究[J]. 玻璃钢/复合材料, 1992, (4): 2-5.
[12] Chamis, C. C., Hanson, M. P. and Serafini, T.T: Impact Resistance of Unidirectional Fiber Composites[J]. Special Technical Publication, ASTM, STP 497, l972: 324-349.
[13] 张永明. 纤维环向缠绕复合材料CNG 气瓶碰撞试验损伤容限研究[D]. 上海: 华东理工大学.
[14] Novak, R. C. and DeCrecent, M. A. in Impact Behaviour of Unidirectional Composites[J]. ASTM STP 497, American Society for Testing and Materials, Philadelphia, PA, 1972: 311-323.
[15] 轩福贞等. 两级载荷下复合材料层板疲劳与寿命预测[J]. 应用力学学报, 1998, 15(1): 90-94.
[16] 徐延海, 李永生等. 全复合材料车用天然气气瓶使用寿命的计算与分析[J]. 玻璃钢/复合材料, 2010, (5): 52-55.
[17] 张颖军, 梅志远等. FRP 层合板低速冲击损伤特性研究现状与展望[J]. 玻璃钢/复合材料, 2011, (1): 52-58.
[18] 周红涛, 钱坤等. 铝蒙皮整体中空夹层复合材料低速冲击的实验研究[J]. 玻璃钢/复合材料, 2009, (5): 49-52.