复合材料科学与工程 ›› 2013, Vol. 0 ›› Issue (2): 98-101.

• 综述 • 上一篇    下一篇

工程结构加固方法综述

张春生, 严保山   

  1. 河南理工大学土木工程学院,河南焦作454003
  • 收稿日期:2012-04-23 发布日期:2022-03-17
  • 作者简介:张春生(1974-),男,硕士,副教授,主要从事建筑工程方面的研究工作。
  • 基金资助:
    国家自然科学基金(51108161); 河南省重点学科项目(509919); 河南理工大学博士基金(B2010-10)

SURVEY ON ENGINEERING STRUCTURE REINFORCING METHOD

ZHANG Chun-sheng, YAN Bao-shan   

  1. School of Civil Engineering,Henan Polytechnic University,Jiaozuo 454003,China
  • Received:2012-04-23 Published:2022-03-17

摘要: 工程结构随着使用年限的增加、环境侵蚀及各类灾害的影响,或由于结构功能改变及设计施工失误等多方面的原因,导致结构性能不能继续满足功能要求,因而需要对其进行必要的维修加固。本文通过对大量资料文献的阅读,概述了国内外关于构件的抗弯、抗剪和抗压性能的研究及工程应用成果,分析了目前加固技术的优缺点,提出了今后的研究方向,可为相关研究人员提供参考。

关键词: 工程结构, 维修加固, 加固方法

Abstract: With the increasing use of time, the environmental erosion and impact of various types of disasters,or due to the changes in the structural function, the design and construction errors and many other reasons, that result in engineering structures' structural performance can not continue to meet the functional requirements, so it needs to carry out the necessary repair and reinforcement. Through reading the large amounts of data, the research about components' bending, shear and compressive properties and application results of the engineering were summarized, the current reinforcement technology's advantages and disadvantages were analyzed, the direction of future research was put forward,and provide reference for related research.

Key words: engineering structure, repair and reinforcement, reinforcing method

中图分类号: