玻璃纤维增强塑料夹砂管的环刚度分析

复合材料科学与工程 ›› 2013, Vol. 0 ›› Issue (6): 36-39.

玻璃纤维增强塑料夹砂管的环刚度分析

杨建明¹, 陈建中²

1.塔城地区白杨河引水工程建设管理局,新疆 834700;
2.武汉理工大学,武汉 430070

收稿日期:2013-04-09 出版日期:2013-09-28 发布日期:2022-03-15
作者简介:杨建明(1964-), 男,高级工程师,主要从事水利水电工程规划设计及建设管理。

RING STIFFNESS ANALYSIS OF GLASS FIBER REINFORCED PLASTICS MORTAR PIPE

YANG Jian-ming¹, CHEN Jian-zhong²

1. Diversion Project Management Bureau of Baiyang River in Tacheng Area,Xinjiang 834700,China;
2. Wuhan University of Technology,Wuhan 430070,China

Received:2013-04-09 Online:2013-09-28 Published:2022-03-15

摘要/Abstract

摘要： 通过对玻璃纤维增强塑料夹砂管的环刚度、管刚度、刚度等级概念进行分析,明确了环刚度的内涵是管道在外载作用下抵抗变形的一种能力,管刚度与环刚度并不是同一个概念,而刚度等级是管材初始特定环刚度的级别。由环刚度的相关概念分析了环刚度设计与测试的基本方法,并根据设计规范的要求对实际工程中所需要的刚度等级从变形和稳定性两个方面进行了分析,得到了确定刚度等级的基本原则和方法及其与埋设条件之间的关系。对正确理解玻璃纤维增强塑料夹砂管的环刚度以及环刚度的设计、测试及选择都具有一定的参考意义。

关键词: 玻璃纤维增强塑料夹砂管, 环刚度, 管刚度, 刚度等级, 综合变形模量

Abstract: The concepts of ring stiffness, pipe stiffness and nominal stiffness of the glass fiber reinforced plastics mortar pipe are analyzed. Ring stiffness is a kind of ability of pipe ring under the action of the external load resistance to deformation. Pipe stiffness and ring stiffness is not the same concept, and nominal stiffness is the initial specific ring stiffness level. The basic method of design and test of ring stiffness is analyzed, and according to the design requirements of nominal stiffness required in practical engineering are analyzed from two aspects of deflection and buckling. The basic principles and methods of determine nominal stiffness and the relationship between ring stiffness and embedment conditions are obtained. It has reference significance to correctly understand ring stiffness of glass fiber reinforced plastics mortar pipe and ring stiffness design, test and selection.

Key words: glass fiber reinforced plastics mortar pipe, ring stiffness, pipe stiffness, nominal stiffness, composite soil constrained modulus

中图分类号:

TB332

杨建明, 陈建中. 玻璃纤维增强塑料夹砂管的环刚度分析[J]. 复合材料科学与工程, 2013, 0(6): 36-39.

YANG Jian-ming, CHEN Jian-zhong. RING STIFFNESS ANALYSIS OF GLASS FIBER REINFORCED PLASTICS MORTAR PIPE[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(6): 36-39.

[1]	杨凌峰, 蔡浩鹏, 陈恩, 田文华. 碳纤维复合材料缠绕制品抗外压性能研究[J]. 玻璃钢/复合材料, 2018, 0(4): 15-20.
[2]	朱央炫, 陈建中, 吕泳, 刘菊芳. 玻璃钢空心夹层管道及力学性能分析[J]. 玻璃钢/复合材料, 2018, 0(11): 37-42.
[3]	石华旺,高怀君,魏连雨,尹航. 埋地玻璃钢夹砂管涵环刚度优化设计[J]. 玻璃钢/复合材料, 2017, 0(12): 51-56.
[4]	程艾琳, 张国军, 杨大伟. 加筋玻璃钢管道的环刚度分析[J]. 复合材料科学与工程, 2015, 0(2): 72-74.
[5]	程雄飞, 陈建中, 崔友国, 宋胤. 玻璃钢加筋管环刚度的有限元优化设计[J]. 复合材料科学与工程, 2015, 0(11): 30-33.
[6]	汪准, 邓京兰, 王继辉, 丁安心. 玻璃钢夹砂管道的环刚度有限元分析及应用[J]. 复合材料科学与工程, 2014, 0(11): 16-20.