连续纤维增强热塑性树脂预浸料的研究进展

复合材料科学与工程 ›› 2013, Vol. 0 ›› Issue (7): 53-58.

连续纤维增强热塑性树脂预浸料的研究进展

田振生¹, 刘大伟², 李刚^2,*, 杨小平²

1.中国石油吉林石化公司研究院,吉林 132021;
2.北京化工大学有机无机复合材料国家重点实验室,北京 100029

收稿日期:2012-11-02 出版日期:2013-10-28 发布日期:2022-03-15
通讯作者: 李刚(1974-),男,博士,副教授,主要从事环氧树脂及其复合材料研究,ligang@mail.buct.edu.cn。
作者简介:田振生(1962-),男,教授级高工,主要从事碳纤维及其复合材料研究。

RESEARCH PROGRESS OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC PREPREGS

TIAN Zhen-sheng¹, LIU Da-wei², LI Gang^2,*, YANG Xiao-ping²

1. Research Institute of Jilin Petrochemical Co. of CNPC,Jilin 132021,China;
2. State Key Laboratory of Organic-Inorganic Composites,Beijing University of Chemical and Technology,Beijing 100029,China

Received:2012-11-02 Online:2013-10-28 Published:2022-03-15

摘要/Abstract

摘要： 本文总结了连续纤维增强热塑性树脂预浸料的发展及应用,分析了热塑性预浸料可选择的增强纤维和基体树脂,以及国外商业化热塑性预浸料的进展;讨论了热塑性预浸料不同制备技术的优缺点,重点阐述了熔融浸渍工艺实施的难点,并指出熔融浸渍和薄膜层叠法相结合的工艺是比较适合制备热塑性预浸料的成型方法。

关键词: 连续纤维, 热塑性树脂, 预浸料, 熔融浸渍

Abstract: The development and application of continuous fiber reinforced thermoplastic prepregs were reviewed. The reinforcing fiber and resin matrix used in thermoplastic prepreg preparation were listed, and the progresses of foreign commercial thermoplastic prepregs were summarized. The advantages and shortcomings of preparation method of thermoplastic prepregs were discussed, and the difficulties of melt impregnation technique were stated in detail, which indicated that the combination of melt impregnation and film stacking was the optional molding technique for the fabrication of thermoplastic prepregs.

Key words: continuous fiber, thermoplastic, prepreg, melt impregnation

中图分类号:

TB332

田振生, 刘大伟, 李刚, 杨小平. 连续纤维增强热塑性树脂预浸料的研究进展[J]. 复合材料科学与工程, 2013, 0(7): 53-58.

TIAN Zhen-sheng, LIU Da-wei, LI Gang, YANG Xiao-ping. RESEARCH PROGRESS OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC PREPREGS[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(7): 53-58.

参考文献

[1] Thomason JL.The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP[J]. Compos: Part A,2002,(33): 1641-1652.
[2] 李旭武,周晓东,郭兵兵,万立. 工艺条件对两步法缠绕成型连续玻璃纤维增强聚丙烯管材层间剪切强度及树脂含量的影响[J]. 玻璃钢/复合材料,2011,(6): 64-67.
[3] Weigerk. Long fiber reinforced plastics advance[J]. Modern Plastics,2003,(80): 39-40.
[4] 秦明. 热塑性聚芳醚酮类树脂基复合材料的制备及连接技术研究[D]. 浙江大学博士学位论文,2004.
[5] 郭书良,段跃新,肇研,罗云烽. 连续玻璃纤维增强热塑/热固性复合材料力学性能研究[J]. 玻璃钢/复合材料,2009,(5): 42-45.
[6] 王兴刚,于洋,李树茂等. 先进热塑性树脂基复合材料在航天航空上的应用[J]. 纤维复合材料,2011,(2): 44-47.
[7] 郑孝霞,钱春香. 加固用连续纤维增强热塑性树脂基复合材料预制片材的研究综述[J]. 高科技纤维与应用,2003,(28): 36-40.
[8] Michael B.Widest thermoplastic prepreg tapes produced[J]. Reinforced Plastics,2005,(2): 16.
[9] 毕鸿章. 瑞典一厂商开发热塑性复合材料制品[J]. 高科技纤维与应用,2005,(2): 51.
[10] 叶鼎铨. 卓越的连续纤维增强热塑性塑料技术[J]. 玻璃钢,2006,(4): 44-46.
[11] 关于热塑性预浸料新品的开发[J]. 高科技纤维与应用,2011,(36): 50.
[12] 李涛,黄晓梅,余进,李学佳. 流化床粉未浸渍法中影响复合材料纤维含量因素的研究[J]. 玻璃钢/复合材料,2009,(5): 14-17.
[13] 李劲,李伟,范群等. 碳纤维单丝带对酚醛树脂基复合材料力学性能的增强作用[J]. 复合材料学报,2006,(23): 51-55.
[14] 张万虎. 连续碳纤维增强热塑性复合材料浸渍特性研究[D].中国纺织大学博士学位论文,1999.
[15] 解延秀,张冠. 连续纤维增强热塑性树脂复合材料预浸带的制备设备及应用[P]. 中国: 101474868.
[16] Koichi,Toshimori,Takahiro. Long fiber reinforced polypropylene composition[P]. EP Patent: 1236771.
[17] Elsevier Science Ltd.Azdel Invest in GMT for the Future.Rein-forced Plastics[J]. 1995,(9): 44-48.
[18] Fukushima,Toshiharu.Carbon fiber,thermoplastic resin,carbon fiber reinforced thermoplastic resin thereof and prepreg therefor[P]. EP Patent: 05376444.