红外热波法检测夹层结构内部缺陷的研究

复合材料科学与工程 ›› 2013, Vol. 0 ›› Issue (8): 55-59.

红外热波法检测夹层结构内部缺陷的研究

余轶, 刘伟庆^*, 万里, 方海

南京工业大学土木工程学院,江苏南京 211816

收稿日期:2013-01-25 出版日期:2013-11-28 发布日期:2022-03-22
通讯作者: 刘伟庆(1964-),男,教授,博士,博导,主要从事复合材料、现代木结构、结构振动控制研究,wqliu@njut.edu.cn。
作者简介:余轶(1987-),男,硕士,主要从事工程复合材料研究。
基金资助:
国家自然科学基金重点项目(51238003); 国家自然科学青年基金项目(51208251)

INFRARED DETECTION TO SANDWICH STRUCTURES WITH INSIDE DEFECTS

YU Yi, LIU Wei-qing, WAN Li, FANG Hai

College of Civil Engineering, Nanjing University of Technology, Nanjing 211816, China

Received:2013-01-25 Online:2013-11-28 Published:2022-03-22

摘要/Abstract

摘要： 在夹层结构内部,缺陷会使热量在物体中的传导出现差异,导致物体表面出现温度和红外辐射特征差异。基于该原理,采用有限元方法,对含内部缺陷的夹层结构分别进行了稳态、瞬态下的参数分析,与红外热像实际检测结果做了对比,得出了一般红外方法对于夹层结构的缺陷识别精度,并且分析了部分影响因素对检测结果的影响,给出了使用红外热像检测法对夹层结构内部缺陷进行无损检测的建议。

关键词: 夹层结构, 缺陷, 红外热波检测, 有限元分析

Abstract: The inside detection can course a difference in conduction of the heat wave which leads to a difference of the surface temperature which can be received by thermal imager in the form of images of different colours. The paper makes a research on the defects of sandwich structures including the parametric analysis under transient thermal and steady thermal conditions using finite element software depending on the theories above. By the comparison of the software simulation and the test result, the paper gives the accuracy of infrared detection to sandwich structures with defects. At the same time, some effects which may affect the testing result are analysed and some suggestions about using infrared detection to sandwich defects are made.

Key words: sandwich, defect, infrared detection, finite element analysis

中图分类号:

TB332
TQ11

余轶, 刘伟庆, 万里, 方海. 红外热波法检测夹层结构内部缺陷的研究[J]. 复合材料科学与工程, 2013, 0(8): 55-59.

YU Yi, LIU Wei-qing, WAN Li, FANG Hai. INFRARED DETECTION TO SANDWICH STRUCTURES WITH INSIDE DEFECTS[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(8): 55-59.

参考文献

[1] 李艳红,李秀芬,冯立春,张存林. 红外热波检测技术对泡沫夹芯结构的检测[C]. 光电技术与系统文选——中国光学学会光电技术委员会成立二十周年暨二十一届全国光电技术与系统学会会议论文集,2005. 660-664.
[2] Igor Maria De Rosa,Carlo Santulli,Fabrizio Sarasini. Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission and IR thermography[J]. E-Journal of Non Destructive Testing,2009,NDT. net.
[3] Carosena Meola,Giovanni M. Carlomagno. Impact damage in GFRP: New insights with infrared thermography[J]. Composites: Part A, 2010,41: 1839-1847.
[4] Carlo Satulli. IR thermography study of the effect of moulding parameters on impact resistance in e-glass/polypropylene commingled laminates[J]. NDT&E international,2002,35: 377-383.
[5] R. J. Ball,D. P. Almond. The detection and measurement of impact damage in thick carbon fiber reinforced laminates by transient thermography[J]. NDT&E international, 1998, 31(3): 165-173.
[6] N. P. Avdelidisa,A. Moropoulou,Z. P. Marioli Riga. The technology of composite patches and their structural reliability inspection using infrared imaging[J]. Progress in Aerospace Sciences,2003,39: 317-328.
[7] Carlo Santulli. Impact damage characterisation of thermoplastic matrix composites using transmision transient thermography[J]. Nondestructive Testing and Evaluation, 2003,19(3): 79-90.
[8] Carlo Santulli. IR thermography study of the effect of moulding parameters on impact resistance in E-glass/polypropylene commingled laminates[J]. NDT&E Int-ernational, 2002, 35: 377-383.
[9] Igor M. De Rosa,Carlo Santulli,Fabrizio Sarasini,Marco Valente. Post-impact damage characterization of hybrid configurations of jute/glass polyester laminate using acoustic emission and IR thermography[J]. Composites Science and Technology,2009,69: 1142-1150.
[10] 方海,刘伟庆,万里. 格构增强型复合材料夹层结构的制备与受力性能[J]. 玻璃钢/复合材料,2009, (04): 67-69.
[11] 葛邦,杨涛等. 复合材料无损检测技术研究进展[J]. 玻璃钢/复合材料,2009, (06): 67-71.
[12] 汪星明,郭耀红等. 复合材料无损检测研究进展[J]. 玻璃钢/复合材料, 2012,S1: 261-265.
[13] 王永茂,郭兴旺等. 缺陷大小和深度的红外检测[J]. 无损检测,2003, 25(9): 458-461.
[14] 陈珏. 材料内部脱黏的红外无损检测[J]. 红外技术,2001,23(3): 39-42.
[15] 陈大鹏,张存林等. 超声热红外技术在无损领域中的应用[J]. 激光与红外,2008, 38(8): 778-780.
[16] 唐桂云,王云飞等. 复合材料泡沫夹层结构的缺陷评定方法研究[J]. 纤维复合材料,2011,2: 30-32.
[17] 李晓霞,伍耐明等. 碳纤维层合板低速冲击后的红外热波检测分析[J]. 复合材料学报, 2010, 27(6): 88-93.