复合材料科学与工程 ›› 2014, Vol. 0 ›› Issue (1): 85-89.

• 综述 • 上一篇    下一篇

基于可靠度的FRP加固混凝土结构研究综述

吴毅彬*, 金国芳, 李敏峰   

  1. 同济大学结构工程与防灾研究所,上海200092
  • 收稿日期:2011-09-05 出版日期:2014-01-28 发布日期:2021-09-17
  • 作者简介:吴毅彬(1982-),男,博士研究生,主要从事工程抗震与防灾、结构鉴定与加固方向研究,wuyibindddd@hotmail.com。
  • 基金资助:
    国家自然科学基金资助项目(50621062);上海市科研计划课题项目(1104H105000)

INTRODUCTION TO RELIABILITY-BASED DESIGN OF CONCRETE STRUCTURE STRENGTHENED WITH FIBER REINFORCED POLYMER

WU Yi-bin, JIN Guo-fang, LI Min-feng   

  1. Research Institute of Structural Engineering and Disaster Reduction, Tongji University, Shanghai 200092, China
  • Received:2011-09-05 Online:2014-01-28 Published:2021-09-17

摘要: 通过对现有FRP材料力学参数概率分布、FRP加固混凝土结构可靠度、荷载-抗力分项系数表达式及相关分项系数取值等研究现状的回顾,表明现阶段FRP材性参数概率分布多为经验性假设,FRP加固混凝土结构在不同破坏模式下的可靠度研究尚不全面,同时相关分项系数取值差异性较大,且未经严谨的可靠度检验。为进一步完善基于概率极限状态理论的FRP加固混凝土结构设计理论,本文建议了后续进一步研究的工作内容。

关键词: 纤维增强复合材料, 混凝土结构, 加固, 可靠度

Abstract: A critical review of the-state-of-the-art researches was addressed on the probability distribution of FRP mechanical property, reliability of concrete structure strengthened with FRP, load and reisitence factor expression and the reduction factors including resistence reduction factor and material strength reduction factor and so on. It is indicated that probability distribution was experience assumptions, reliability of strengthened structures were not comprehensive, and then the relative reisitence factor have been adapted from those in the design codes for steel reinforced concrete structures without reliability calibration. In order to make the research work more systematic and reasonable, some suggestions and furture research works based on reliability theory were put forward.

Key words: fiber reinforced polymer, concrete structure, reinforcement, reliability

中图分类号: