树脂传递模塑工艺中不饱和流体随流动方向变化的研究进展

复合材料科学与工程 ›› 2014, Vol. 0 ›› Issue (11): 88-90.

树脂传递模塑工艺中不饱和流体随流动方向变化的研究进展

刘红影

北京玻钢院复合材料有限公司,北京 102101

收稿日期:2013-11-25 出版日期:2014-11-28 发布日期:2021-09-13
作者简介:刘红影(1976-),女,硕士,高级工程师,主要从事聚合物基复合材料方面的研究。

THE PROGRESS OF VARIATIONS IN UNSATURATED FLOW WITH FLOW DIRECTION IN RESINTRANSFER MOLDING

LIU Hong-ying

Beijing Composite Materials Co., Ltd., Beijing 102101, China

Received:2013-11-25 Online:2014-11-28 Published:2021-09-13

摘要/Abstract

摘要： 树脂传递模塑工艺(RTM)被人们广泛应用。关于RTM的相关研究主要集中在树脂基体、增强材料、工艺过程控制、模具设计、理论研究等方面。本文介绍了不饱和流体的先期研究,阐述了不饱和流体随流动方向变化的研究结果。

关键词: 树脂传递模塑工艺(RTM), 不饱和流体, 流动方向

Abstract: Resin Transfer molding is wildly used. This paper reviews the study of RTM from resin matrix system, reinforcing materials, processing, processing mould and theoretical research. This paper introduces the proposed work of unsaturated flow and the results of variations in unsaturated flow with flow direction.

Key words: RTM, unsaturated flow, flow direction

中图分类号:

TB332

刘红影. 树脂传递模塑工艺中不饱和流体随流动方向变化的研究进展[J]. 复合材料科学与工程, 2014, 0(11): 88-90.

LIU Hong-ying. THE PROGRESS OF VARIATIONS IN UNSATURATED FLOW WITH FLOW DIRECTION IN RESINTRANSFER MOLDING[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(11): 88-90.

参考文献

[1] 胡美些,郭小东,王宁. 国内树脂传递模塑技术的研究进展[J]. 高科技纤维与应用, 2006, (4): 29-33.
[2] Williams, J.G., Morris, Liquid flow though aligned fiber beds[J]. Polymer Engineering and Science, 1974, 14(6): 413-419.
[3] J.A. Molnar, L. Trevino, L.J. Lee. Liquid flow in molds with prelocated fiber mats[J]. Polymer Composites, 1989,(10):414-423.
[4] R.S. Parnas, F.R. Phelan Jr. The effect of heterogeneous porous media on mold filling in resin transfer molding[J]. SAMPE Quarterly, 1991,(22):53-60.
[5] Y.T. Chen, H.T. Davis, C.W. Macosko. Wetting of fiber mats for composites manufacturing:Ⅰ. Visualization experiments[J]. AIChE Journal,1995,41:2261-2273.
[6] Y.T. Chen, C.W. Macosko, H.T. Davis. Wetting of fiber mats for composites manufacturing:Ⅱ.air entrapment model[J]. AIChE Journal,1995,41:2274-2281.
[7] N.Patel, V.Rohatgi, L.J. Lee. Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat[J]. Polymer Engineering and Science, 1995,35:837-851.
[8] 秦伟,吴晓宏,王福平,等. 超声处理对RTM工艺成型浸润性的影响[J]. 哈尔滨工业大学学报,2004,(11):1443-1445.
[9] 王伯臣,黄玉东,刘丽.树脂传递模塑(RTM)工艺树脂微观流动行为数值分析[J]. 固体火箭技术,2006,29(4):297-300.
[10] Fracchia CA, Castro J, Tucher Ⅲ CL. A finite element/control volume simulation of resin transfers molding. In: Proceedings of the American society for composites, fourth technical conference[Z]. Lancaster(PA): Technomic, 1989.
[11] Bruschke MV, Advani SG. RTM filling simulation of complex three dimensional shell-like structures[Z]. Sampe Quart, 1991.
[12] Parnas Richard S, Phelan Jr Frederick R. Effect of heterogeneous porous media on mold filling in resin transfer molding[Z]. Sampe Quart, 1990.
[13] Pillai KM, Advani SG. A model for unsaturated flow in woven fiber mat performs during mold fillings in resin transfer molding[J]. Composites Mater., 1998, 32(19).
[14] Parseval YD, Pillai KM, Advani SG. A simple model for the variation of permeability due to partial saturation in dual scale porous media[J]. Transport Porous Med., 1997, 27:243-264.
[15] Slade J, Pillai KM, Advani SG. Investigation of unsaturated flow for woven braided and stitched fiber mats during mold-filling in resin transfer molding[J]. Polym compos., 2001, 22(24):491-505.
[16] Pillai KM. Governing equations for unsaturated flow through woven fiber mats: part 1 isothermal flows[J]. Compos Part A: Appl Sci Manuf., 2002, 33: 1007-1019.
[17] Pillai KM, Munagavalsa MS. Governing equations for unsaturated flow through woven fiber mats, part 2: nonisothermal reactive flow[J]. Compos Part A: Appl Sci Manuf, 2004, 35:403-415.
[18] Roy T, Babu BZ, Pillai KM. First steps towards quantities validation of the unsaturated flow theories in liquid composite molding. In: Preoceedings of ASME international: summer be transfer conference[Z]. Las Vegas, 2003.
[19] Roy T, Pillai KM. Characterization of dual-scale fiber mats for unsaturated flow in liquid composite molding[J]. Polym composites, 2005, 26(6):756-769.
[20] Hua Tan, Tonmoy Roy, Krishna M. Pillai Variations in unsaturated flow direction in resin transfer molding: An experimental investigation[J]. Composites: Part A, 2007, 38: 1872-1892.