复合材料预紧力齿连接技术研究现状与进展

复合材料科学与工程 ›› 2014, Vol. 0 ›› Issue (12): 52-56.

复合材料预紧力齿连接技术研究现状与进展

赵启林¹, 高一峰¹, 李飞²

1.解放军理工大学野战工程学院,江苏南京 210007;
2.后勤工程学院,重庆 401331

出版日期:2014-12-28 发布日期:2021-09-13
作者简介:赵启林(1972-),男,副教授,从事复合材料应用研究。
基金资助:
国家自然科学基金(11372355)

CURRENT RESEARCH AND DEVELOPMENT OF THE APPLICATION OF THE PRE-TIGHTENED TOOTH CONNECTION

ZHAO Qi-lin¹, GAO Yi-feng¹, LI Fei²

1. Engineering Institute of Engineer Corps, PLA University of Science and Technology, Nanjing 210007, China;
2. Institute of logistics engineering of PLA, Chongqing 401331, China

Online:2014-12-28 Published:2021-09-13

摘要/Abstract

摘要： 复合材料预紧力齿连接是一种适合大承载构件、具有高连接效率的连接技术,已展现出良好的应用前景。本文简述了复合材料预紧力齿连接技术在破坏模式、传力机理与设计计算方法等方面的研究进展,介绍了该技术在两个典型结构中的应用情况,最后展望了该技术的应用前景,提出了该技术在基础性研究方面有待完善的工作。

关键词: 预紧力齿连接, 复合材料, 进展

Abstract: The composite pre-tightened tooth connection is a technique with high efficiency and applied to large bearing components.It has showed a good prospect of applications.This paper summarys research progresses of the composite pre-tightened tooth connection in failure modes, load transfer mechanism and design calculation methods and so on ,and introduces two typical applications of the technique. Finally, the application prospect of the technique is reviewed, and the basic research work which needs to be improved is put forward.

Key words: pre-tightened tooth connection, composite, progress

中图分类号:

TB332

赵启林, 高一峰, 李飞. 复合材料预紧力齿连接技术研究现状与进展[J]. 复合材料科学与工程, 2014, 0(12): 52-56.

ZHAO Qi-lin, GAO Yi-feng, LI Fei. CURRENT RESEARCH AND DEVELOPMENT OF THE APPLICATION OF THE PRE-TIGHTENED TOOTH CONNECTION[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(12): 52-56.

参考文献

[1] Starikov R, Schon J. Quasi-static behavior of composite joints with protruding head bolts[J]. Compos Struct, 2001,51:411-425.
[2] Roman Starikov, Joakim Schn. Experimental Investigation of Fatigue Behaviour in Composite Bolted Joints[J].
[3] Choi, J.H., Lee, D.G.. An Experimental Study of the Static Torque Capacity of the Adhesively-bonded Tubular Single Lap Joint[J]. Journal of Adhesion, 1996, 55: 245-260.
[4] Deng A Z, Zhao Q L, Li F, et al. Research on bearing capacity of single tooth to composite pre-tightened teeth connection[J]. Journal of Reinforced Plastics and Composites, 2013, 32(21):1603-1613.
[5] Fei Li, Qi Lin Zhao. Prediction of tensile capacity based on cohesive zone model of bond anchorage for fiber-reinforce polymer tendon[J]. Composite Structures, 2010, (92):2400-2405.
[6] 李飞. 复合材料新型连接技术及在桁架中的应用研究[D]. 南京: 解放军理工大学博士学位论文, 2012.
[7] 马毓,赵启林. 复合材料胶-螺混合连接接头承载力分析[J]. 复合材料学报, 2011, 28(4): 225-231.
[8] Qi Lin Zhao,Fei Li. Research on Bearing Capacity of Single Tooth to Composite Pre-Tightened Teeth Connection[J].Journal of Reinforced Plastics and Composites.
[9] 赵启林,李飞.复合材料预紧力螺纹连接技术[P]. 201020157303.1.
[10] 高一峰. 复合材料预紧力齿连接强度预测及接头设计[D].南京:解放军理工大学硕士学位论文, 2014.
[11] 徐龙星. 复合材料预紧力齿连接承载力计算方法与试验研究[D].南京:解放军理工大学硕士学位论文, 2014.
[12] 苗大胜. 纤维增强树脂基复合材料组合空间桁架桥连接技术和结构性能研究[D]. 南京: 解放军理工大学硕士学位论文, 2013.
[13] 赵启林,刘鹏飞,徐龙星. 玻璃纤维复合材料-钢组合桁架结构长期力学性能研究[J]. 工业建筑, 2013(增刊).
[14] 赵启林,李飞,徐康. 新型复合材料桁架结构静载实验研究[J]. 工业建筑, 2011(增刊).
[15] 赵启林,李飞. 一种主承力复合材料桁架桥制备方法[P]. 201110355168.0.
[16] Pengfei Liu,Qilin Zhao,Fei Li, Jinchun Liu, Haosen Chen.Research on the mechanical properties of a glass fiber reinforced polymer-steel combined truss structure[J]. The Scientific World Journal, 2014.
[17] Zhang D. Z Q .H Y. Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system[J]. Composite Structures, 2014, 108(0): 600-615.
[18] D.-D. Zhang, Y.-X. Huang, Q.-L. Zhao, F. Li, F. Li, Y.-F. Gao. Structural performance of a hybrid FRP-aluminum modular triangular truss system subjected to various loading conditions[J]. The Scientific World Journal, 2014.