横隔板增强型泡沫夹芯复合材料梁抗剪性能试验研究

复合材料科学与工程 ›› 2014, Vol. 0 ›› Issue (12): 91-96.

横隔板增强型泡沫夹芯复合材料梁抗剪性能试验研究

王慧, 齐玉军^*, 刘伟庆

南京工业大学土木工程学院,南京 211816

收稿日期:2014-11-02 出版日期:2014-12-28 发布日期:2021-09-13
通讯作者: 齐玉军(1982-),男,博士,讲师,主要从事新材料与新型结构研究,qiyujun11@163.com。
作者简介:王慧(1990-),女,硕士研究生,主要从事复合材料结构研究。
基金资助:
国家自然科学基金重点项目(51238003);国家自然科学基金项目(51308287);江苏省基础研究计划项目(BK20130936)

EXPERIMENTAL STUDY ON SHEAR BEHAVIOR OF REINFORCED FOAM CORE COMPOSITE SANDWICH STRUCTURES

WANG Hui, QI Yu-jun, LIU Wei-qing

College of Civil Engineering, Nanjing Tech University, Nanjing 211816, China

Received:2014-11-02 Online:2014-12-28 Published:2021-09-13

摘要/Abstract

摘要： 复合材料泡沫夹芯结构易发生芯材剪切破坏,需对泡沫芯材进行增强。本文对比分析了不同增强泡沫夹芯结构的增强原理、芯材对界面性能和抗剪能力的贡献以及各自的局限;采用真空导入工艺制作了横隔板增强泡沫夹芯梁,并对其进行了剪跨比为3的三点弯试验,研究了横隔板及其间距对泡沫夹芯结构抗剪性能的影响。试验结果表明,横隔板的存在能有效提高构件的延性,且横隔板间距越小,延性越好,改善了泡沫夹芯结构脆性破坏的特性;但横隔板增强对夹芯梁强度和刚度的影响不大,该结果与垂直缝纫增强泡沫夹芯结构的试验结果类似。横隔板增强泡沫夹芯结构具有良好的设计性,其制作过程比较简单,可改变横隔板角度或采用双向隔板增强,从而在保持延性的优势下,提高其强度和刚度。

关键词: 复合材料夹芯梁, 剪切性能, 横隔板增强泡沫芯材, 延性

Abstract: Reinforcement is necessary for the foam core composite sandwich structure because of the poor shear performance of the foam core. This paper presented several kinds of reinforced composite structures including their difference in design principles, their contributions to the interfacial property and shear behavior as well as their limitations. What′s more, three point bending tests were conducted on the diaphragm reinforced foam core sandwich beams made through vacuum infusion process, in order to study the impact of the reinforced measure and the diaphragm span on the shear behavior. The experimental results showed that the existence of diaphragms may enhance beams′ ductility, and the shorter the diaphragm span, the more enhancement in ductility, hence, the brittleness of foam core sandwich structure were greatly improved. However, there was little increase in strength and rigidity, which is similar to the experimental result of 90° stitch addition in sandwich structure. The diaphragm reinforced structure is simple made and well designed, and the change from diaphragm to inclined or biaxial diaphragm reinforced foam core composite structure may not only enhance its strength and rigidity, but also remain its advantage in ductility.

Key words: composite sandwich beam, shear behavior, diaphragm reinforced foam core, ductility

中图分类号:

TB332

王慧, 齐玉军, 刘伟庆. 横隔板增强型泡沫夹芯复合材料梁抗剪性能试验研究[J]. 复合材料科学与工程, 2014, 0(12): 91-96.

WANG Hui, QI Yu-jun, LIU Wei-qing. EXPERIMENTAL STUDY ON SHEAR BEHAVIOR OF REINFORCED FOAM CORE COMPOSITE SANDWICH STRUCTURES[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(12): 91-96.

参考文献

[1] Kampner M, Grenestedt JL. On using corrugated skins to carry shear in sandwich beams[J]. Compos Struct, 2007,85: 139-148.
[2] Styles M, Compton P, Kalyanasundaram S. The effect of core thickness on the flexural behaviour of aluminium foam sandwich structures[J]. Compos Struct, 2007,80: 532-538.
[3] AdamsD O, Stanley L E. Development and Evaluation of Stitched Sandwich Panels[R].NASACR-211025, 2001.
[4] 杨慧. 缝合复合材料泡沫夹芯结构细观特征及刚度预测[D]. 上海: 上海交通大学, 2009.
[5] B.Lascoup, Z.Aboura, K.Khellil, M.Benzeggagh. On the mechanical effect of stitch addition in sandwich panel[J]. Compos Sci Technol, 2006, 66: 1385-1398.
[6] Dransfield K, Baillie C, Mai Y-W. Improving the delamination resistance of CFRP by stitching-a review[J]. Compos Sci Technol, 1994, 50: 305-317.
[7] 黄涛. 缝纫泡沫夹层复合材料力学性能研究[D]. 西安: 西北工业大学, 2004.
[8] 陈海欢. X-cor增强泡沫夹层复合材料结构力学行为研究[D]. 上海: 上海交通大学, 2010.
[9] Zheng Yingying, Xiao Jun, Duan Mufeng, Li Yong. Experimental study of partially-cured Z-pins reinforced foam core composites: K-Cor sandwich structures[J]. Chinese Journal of Aeronautics, 2013, 27(1): 153-159.
[10] Carstensen T, Cournoyer D, Kunkel E, etc. X-Cor Advanced Sandwich Core Material[R]. Seattle, WA: Proceedings of 33rd International SAMPE Technical Conference, 2001.
[11] 杜龙, 矫桂琼, 黄涛, 等. X状Z-pin增强泡沫夹层结构的剪切性能[J]. 复合材料学报, 2007, 24(6): 140-146.
[12] Mouritz AP. Compression properties of Z-pinned sandwich composites[J]. Mater Sci, 2006, 41(17): 5771-5774.
[13] Mudan Chen, Guangming Zhou, Jiajia Wang. On mechanical behavior of looped fabric reinforced foam sandwich[J]. Compos Struct, 2014, 118: 159-169.
[14] Mahfuz H, Islam MS, Rangari VK, Saha MC, Jeelani S. Response of sandwich composites with nanophased cores under flexural loading[J]. Composites Part B, 2004, 35: 543-550.
[15] A.Mostafa, K.Shankar, E.V.Morozov. Effect of shear keys diameter on the shear performance of composite sandwich panel with PVC and PU foam core: FE study[J]. Compos Struct, 2013, 102: 90-100.