超高分子量聚乙烯无纬布准静态材料力学性能研究

复合材料科学与工程 ›› 2014, Vol. 0 ›› Issue (2): 14-18.

超高分子量聚乙烯无纬布准静态材料力学性能研究

温垚珂¹, 徐诚^1*, 董雪花²

1.南京理工大学机械工程学院,南京210014;
2.南京理工大学理学院,南京210014

收稿日期:2013-05-22 出版日期:2014-02-28 发布日期:2021-09-17
通讯作者: 徐诚(1962-),男,博士生导师,主要从事非线性有限元技术研究。
作者简介:温垚珂(1986-),男,博士研究生,主要从事复合材料力学及非线性有限元技术研究。
基金资助:
国防973计划资助项目(6131040302)

A STUDY OF THE MECHANICAL PROPERTIES OF CROSS-PLIED UNIDIRECTIONAL UHMWPE SHEETS UNDER QUASI-STATIC LOADING

WEN Yao-ke¹, XU Cheng^1*, DONG Xue-hua²

1. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210014, China;
2. School of Science, Nanjing University of Science and Technology, Nanjing 210014, China

Received:2013-05-22 Online:2014-02-28 Published:2021-09-17

摘要/Abstract

摘要： 超高分子量聚乙烯(UHMWPE)无纬布是制作软质防弹衣的主要材料。首先通过实验研究了UHMWPE无纬布在准静态载荷下的拉伸、面内剪切和冲压式剪切特性。实验表明,UHMWPE无纬布在准静态拉伸过程中发生突然的脆性断裂,拉伸强度约为641MPa;面内剪切实验中试件的力-位移曲线呈现明显的非线性,材料在受力方向发生了塑性强化,试件的主要失效形式为基体的剪切破坏,失效后纤维夹角从90°减小到74°;设计制造了一套用于测量UHMWPE无纬布沿厚度方向剪切强度的夹具,实验得到该型无纬布的剪切强度约为168MPa。随后采用壳单元建立对应的有限元模型,对拉伸实验和冲压式剪切实验过程进行数值模拟。拉伸数值结果在最大拉力、拉伸强度和失效应变等指标上与实验结果较一致,并给出了拉伸过程中试件中的应力分布情况;冲压式剪切数值结果给出了剪切失效部位每层单元的应力变化情况。

关键词: UHMWPE, 拉伸, 面内剪切, 冲压式剪切, 有限元

Abstract: Cross-plied unidirectional Ultra-high molecular weight polyethylene (UHMWPE) sheets is the main material for the production of soft body armor. At first, the tensile behavior, in-plane shear behavior and punch-shear behavior of UHMWPE sheets under quasi-static loading were studied using experimental method. The experimental show a sudden brittle fracture occurred in the quasi-static tension process, the tensile strength is about 641MPa. A highly non-linear behavior of force-displacement curve was observed during in-plane shear process, plastic hardening occurred in the direction of the tension force and matrix shear failure is the main failure mode. After failure, the angel between fibers in adjacent plies has reduced from 90° to 74°. The through-thickness shear strength is about 168MPa, which was obtained using a set of special clamp. Then shell elements were adopted to establish the finite element model for studying the tensile experiment and punch-shear experiment process numerically. The numerical results are in good agreement with the tensile experiment results in maximum tensile force, tensile strength and failure strain, and the stress contours in the UHMWPE sheets were also obtained; The stress history of elements in the shear failure area were captured using numerical method.

Key words: UHMWPE, tension, in-plane shear, punch-shear, FEM

中图分类号:

TB332

温垚珂, 徐诚, 董雪花. 超高分子量聚乙烯无纬布准静态材料力学性能研究[J]. 复合材料科学与工程, 2014, 0(2): 14-18.

WEN Yao-ke, XU Cheng, DONG Xue-hua. A STUDY OF THE MECHANICAL PROPERTIES OF CROSS-PLIED UNIDIRECTIONAL UHMWPE SHEETS UNDER QUASI-STATIC LOADING[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(2): 14-18.

参考文献

[1] Tissington B, Pollard G, Ward IM. A study of the influence of fibre/risin adhesion on the mehanical behaviour of ultra-high-modulus polyethylene fibre composites[J]. Journal of materials science, 1991, 26(1): 82-92.
[2] Cook FP. Characterization of UHMWPE Laminates for High Strain Rate Applications[D]. Blacksburg: Virginia Tech, 2009.
[3] 王耀先,程树军. 高性能有机纤维增强复合材料的界面粘接性能研究[J]. 玻璃钢/复合材料, 2012,(1):25-29.
[4] Chocron Benloulo IS,Rodriguez J,Martinez MA,Galvez VS. Dynamic tensile testing of aramid and polyethylene fiber composites[J].International Journal of Impact Engineering,1997,19(2):135-146.
[5] Koh CP,Shim VPW,Tan VBC.Dynamic behaviour of UHMWPE yarns and addressing impedance mismatch effects of specimen clamps[J].International Journal of Impact Engineering,2010,37(3):324-332.
[6] Umberger PD. Characterization and Response of Thermoplastic Composites and Constituents[D]. Blacksburg: Virginia Tech, 2009.
[7] 武海生,孙志杰,贾晶晶等. 高性能有机纤维单丝复合体系界面粘接性能实验研究[J]. 复合材料学报, 2010, 27(4):59-63.
[8] 孙志杰,张佐光,沈建明,仲伟虹. UD75防弹板工艺参数与弹道性能的初步研究[J]. 复合材料学报, 2001, 18(2):46-49.
[9] 贺成红,张佐光,李玉彬,孙志杰. 复合材料的冲击吸能与动态粘弹特性[J]. 北京航空航天大学学报,2007, 33(7):851-855.
[10] 杨中甲,张佐光,孙志杰,李敏. 高强织物防穿刺作用特征与机制分析[J]. 玻璃钢/复合材料, 2010,(1):40-45.
[11] 庄兴民,张慧萍,晏雄. UHMWPE/PE复合材料的开发与性能研究[J]. 玻璃钢/复合材料, 2004,(1):14-17.
[12] 张慧萍,庄兴民,晏雄,高小玲.聚乙烯自增强复合材料的制备及力学性能. 高分子材料科学与工程, 2004, 20(1):121-124.
[13] 庄兴民,晏雄. UHMWPE/HDPE层合板拉伸损伤扩展的有限元数值模拟[J]. 复合材料学报, 2005, 22(5):141-146.
[14] Davis D. Finite element modeling of Ballistic impact on a glass fiber composite armor[D]. San Luis Obisp: California polytechnic state university, 2012.
[15] Schweizerhof K, Weimar K, MUnz Th, Rottner Th. Crashworthiness Analysis with Enhanced Composite Material Models in LS-DYNA Merits and Limits[C]. LS-DYNA World Conference. Detroit: LSTC, 1998.
[16] Menna C, Asprone D, Caprino G, et al. Numerical simulation of impact tests on GFRP composite laminates[J]. International Journal of Impact Engineering, 2011, 38(8):677-685.
[17] LS-DYNA KEYWORD USER'S MANUAL VOLUME Ⅱ: Material models. Livermore, California CA, USA: Livermore software technology corporation, March 2013.