沥青增韧环氧树脂的研究

摘要/Abstract

摘要： 研究沥青作为一种新的增韧剂,对环氧树脂的增韧效果,并测试分析不同含量的沥青对环氧树脂的韧性影响。结果表明,添加2%的沥青时,环氧树脂冲击韧性提高120%;环氧树脂的拉伸强度和模量随沥青含量的增加变化不大。红外分析结果表明,沥青和环氧树脂之间没有发生化学作用。差示扫描热分析结果显示,沥青含量超过2%之后,固化产物玻璃化转变温度有一定程度降低。

关键词: 环氧树脂, 沥青, 增韧

Abstract: This article describes the toughening effect on epoxy using bitumen as the modifier. Impact properties,tensile properties and thermal properties with different bitumen contents were analyzed. With the addition of only 2% bitumen to epoxy, maximum improvements of 120% were obtained for impact energy. The addition of bitumen had no significant effect on tensile properties of epoxy. FTIR result showed that there was no chemical reaction between epoxy and bitumen. DSC analysis of the hybrid showed that the Tg of epoxy decreases significantly after 2% bitumen.

Key words: epoxy, toughening, bitumen

中图分类号:

TB332

徐燕, 李炜. 沥青增韧环氧树脂的研究[J]. 复合材料科学与工程, 2014, 0(4): 46-50.

XU Yan, LI Wei. TOUGHENING OF EPOXY USING BITUMEN AS MODIFIER[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(4): 46-50.

参考文献

[1] Wunpen Chonkaew, Narongrit Sombatsompop. Mechanical and Tribological Properties of Epoxy Modified by Liquid Carboxyl Terminated Poly(butadiene-coacrylonitrile)Rubber[J]. Applied Polymer Science, 2012, (125): 361-369.
[2] 董玲, 李鹏, 杨小平. 全硫化纳米羧基丁晴橡胶增韧环氧树脂性能的研究[J].2013, (1):20-24.
[3] MI Giannotti, I Mondragon, MJ Galante and PA Oyanguren. Morphology profiles obtained by reaction-induced phase separation in epoxy/polysulfone/poly(ether imide)systems[J]. Polymer Inernational , 2005, 54(3): 897-903.
[4] Qi Wang, Jiayu Zhu, Pan Wang, Liping Li, Qi Yang, Yajiang Huang. Effect of Blending Sequence on the Morphology and Properties of Polyamide 6/EPDM-g-MA/Epoxy Blends[J]. Applied Polymer Science, 2012, 3(124): 5046-5070.
[5] 王琦洁. 环氧树脂增韧进展[J]. 玻璃钢/复合材料, 2004, (3):50-54.
[6] 李艳东, 马立群, 王雅珍, 刘洪成, 汪建新. 核壳聚合物增韧环氧树脂的研究进展[J]. 化工时刊, 2012, 2(26): 31-34.
[7] 张凯, 郝晓东, 黄渝鸿, 周德惠. 核壳型聚合物粒子增韧改性环氧树脂[J]. 化工新型材料, 2003, (12): 354-347.
[8] 武渊博, 李刚, 黄智斌. 端氨基丁晴橡胶增韧环氧树脂的结构与性能[J]. 玻璃钢/复合材料, 2010, (5):44-46.
[9] 黄增芳, 谭松庭, 王霞瑜. 热致液晶聚酯的合成及与环氧树脂共混物的性能研究[J]. 中国塑料, 2003, 12(17): 32-35.
[10] 韦亚兵, 张玲, 李军. 互穿网络法增韧环氧树脂胶粘剂的研究[J]. 中国胶粘剂, 2002, 11(1): 6-8.
[11] 蔡婷, 马君毅. 沥青组分试验的研究与分析[J]. 山西建筑, 2005, 6(31): 111-112.
[12] 薛书凯, 张炜,侯卫国. 环氧树脂增韧新途径及增韧机理的研究[J]. 热固性树脂, 2005, 5(20): 36-40.
[13] 闵召辉, 张占军, 黄卫. 不同沥青体分比环氧树脂沥青混合料的断裂性能[J]. 中国公路学报, 2011, 3(24): 22-28.
[14] 贾辉, 陈志明, 亢阳. 高性能环氧沥青材料的绿色制备技术[J]. 东南大学学报, 2008, 3(38): 496-499.
[15] 朱吉鹏, 陈志明, 闵召辉. 环氧树脂改性沥青材料研究[J]. 东南大学学报, 2004, 4(34): 515-517.
[16] 黄坤, 夏建陵, 李梅. 热固性环氧沥青材料的制备及改性方法研究进展[J]. 热固性树脂, 2009, 6(24): 50-54.
[17] Dai JB, Kuan HC, Du XS, et al. Development of a novel toughener for epoxy resins[J]. Polym Int, 2009, 58(67): 838-845.
[18] Francis B, Thomas S, Sadhana R, et al. Diglycidyl ether of bisphenol-A epoxy resin modified using poly(ether ether ketone) with pendent tert-butyl groups[J]. Polym Sci Part B Polym Phys, 2007, 45(5): 2481-2496.
[19] Pearson RA and Yee AF. Toughening mechanisms in thermoplastic-modified epoxies: 1. modification using poly(phenylene oxide) [J]. Polymer, 1993, 34(67): 3658-3670.