复合材料结构设计参数获得中试验标准探讨

摘要/Abstract

摘要： 对于各向异性复合材料结构设计,需要得到必要的弹性常数和强度常数以实现结构设计和准确校核。本文给出了获得弹性常数和强度常数的试验标准,对每个标准的特点和局限性进行了分析,提出了选用标准进行试验的建议。

Abstract: For anisotropic composite structure design, it is necessary to get the necessary elastic constants and strength constants to achieve structural design and accurate verification. To obtain the elastic constants and intensity constants, this paper provided test standards, analyzed the characteristics and limitations of each standard,and proposed test standard selection recommendations.

Key words: composite material, structure design parameters, test method, standard

中图分类号:

TB332

潘北辰. 复合材料结构设计参数获得中试验标准探讨[J]. 复合材料科学与工程, 2015, 0(1): 88-91.

PAN Bei-chen. DISCUSS OF TEST STANDARD IN OBTAINING COMPOSITE MATERIAL STRUCTURE DESIGN PARAMETERS[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(1): 88-91.

参考文献

[1] 孙敬水. 发达国家标准化战略及其对我国的启示[J]. 科研管理, 2005,(1):1-8.
[2] 胡中永, 等. 新材料研发与标准化的有机结合[J]. 中国标准化, 2010,(1):10-12.
[3] 李顺林,王兴业. 复合材料结构设计基础[M]. 武汉:武汉工业大学出版社,1996.199.
[4] 美国军用手册MIL-HDBK-17F复合材料手册第一卷聚合物基复合材料结构材料表征指南[M]. 北京:中国航空综合技术研究所出版,2004. 254-282.
[5] GB/T 1447-2005, 纤维增强塑料拉伸性能试验方法[S].
[6] GB/T 3354-1999, 定向纤维增强塑料拉伸性能试验方法[S].
[7] GB/T 1458-2008, 纤维缠绕增强塑料环向试样拉伸性能试验方法[S].
[8] ISO 527-5:2009, Plastics-Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites[S].
[9] ASTM D3039-07, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials[S].
[10] ASTM D2290-00, Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method[S].
[11] GB/T 3355-2005, 纤维增强塑料纵横剪切试验方法[S].
[12] GB/T 28889-2012, 复合材料面内剪切性能试验方法[S].
[13] ISO 14129:1997, Fibre-reinforced plastic composites--Determi-nation of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method[S].
[14] ASTM D3518-07, Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate[S].
[15] ASTM D5379-12, Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method[S].
[16] ASTM D4255:01, Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method[S].
[17] ASTM D5448:06, Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders[S].
[18] ASTM D7078:05, Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method[S].
[19] ISO 15310:1999, Fibre-reinforced plastic composites--Determi-nation of the in-plane shear modulus by the plate twist method[S].
[20] GB/T 1450.1-2005,纤维增强塑料层间剪切强度试验方法[S].
[21] JC/T 773-2010,纤维增强塑料短梁法测定层间强度[S].
[22] ISO 14130: 1997, Fibre-reinforced plastic composites--Determi-nation of apparent interlaminar shear strength by short-beam method[S].
[23] GB/T 3856-2005,单向纤维增强塑料平板压缩性能试验方法[S].
[24] GB/T 5258-2008,纤维增强塑料面内压缩性能试验方法[S].
[25] ISO 14126: 1999, Fibre-reinforced plastic composites--Determi-nation of compressive properties in the in-plane direction[S].
[26] ASTM D3410-03, Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading[S].
[27] ASTM D6641-09, Standard Test Method for Compressive Proper-ties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture[S].
[28] GB/T 1448-2005,纤维增强塑料压缩性能试验方法[S].
[29] ASTM D7291:07, Standard Test Method for Through-Thickness Flatwise”Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material[S].
[30] GB/T 4944-2005,玻璃纤维增强塑料层合板层间拉伸强度试验方法[S].