连续纤维增强热塑性复合材料热变形性能研究进展

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (10): 83-86.

连续纤维增强热塑性复合材料热变形性能研究进展

徐子航^1,2, 刘东², 钱群¹, 祝颖丹^2*

1.上海大学理学院,上海 200444;
2.浙江省机器人与智能制造装备技术重点实验室,中国科学院宁波材料技术与工程研究所,宁波 315201

收稿日期:2015-03-26 出版日期:2015-10-28 发布日期:2021-09-14
通讯作者: 祝颖丹(1977-),女,博士,研究员,主要从事复合材料制造相关科研工作,y.zhu@nimte.ac.cn。
作者简介:徐子航(1990-),男,硕士研究生,主要研究方向为热塑性复合材料及成型工艺。
基金资助:
国家青年基金(51203174);宁波市石墨烯专项(2014S10004,2015S1004);中科院STS项目(KFJ-EW-STS-080);宁波市自然基金(2014A610130);宁波市国际合作项目(2015D10012)

RESEARCH PROGRESS IN THERMOFORMABILITY OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITES

XU Zi-hang^1,2, LIU Dong², QIAN Qun¹, ZHU Ying-dan^2*

1.College of Science, Shanghai University, Shanghai 200444, China;

2.Zhejiang Provincial Key Laboratory of Robotics and Intelligent Manufacturing Equipment Technology, Ningbo Institute of Materials Technology &|Engineering, Chinese Academy of Sciences, Ningbo 315201, China

Received:2015-03-26 Online:2015-10-28 Published:2021-09-14

摘要/Abstract

摘要： 连续纤维增强热塑性复合材料(CFRTP)是国际上复合材料的研究热点。介绍了连续纤维增强热塑性复合材料的热变形方式及原理,对比分析了CFRTP热变形实验和数值模拟方法,探讨了影响CFRTP热变形及制品质量的因素,并对CFRTP热成型研究方向和发展前景进行了展望。

关键词: 热塑性复合材料, 热变形成型, 面内剪切, 褶皱

Abstract: Continuous fiber reinforced thermoplastic (CFRTP) is one of the hot topics in international composites. In this paper, the thermoforming theory is briefly reviewed. And previous studies on experimental methods and simulation models of CFRTP thermoforming are compared in detail. Also, the influencing factors on the thermoforming of CFRTP are analyzed and the research directions of thermoforming of CFRTP in future are pointed out.

Key words: thermoplastic composites, thermoforming, intraply shearing, wrinkle

中图分类号:

TB332

徐子航, 刘东, 钱群, 祝颖丹. 连续纤维增强热塑性复合材料热变形性能研究进展[J]. 复合材料科学与工程, 2015, 0(10): 83-86.

XU Zi-hang, LIU Dong, QIAN Qun, ZHU Ying-dan. RESEARCH PROGRESS IN THERMOFORMABILITY OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITES[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(10): 83-86.

参考文献

[1] B. Vieille, W. Albouy, L. Chevalier, et al. About the influence of stamping on thermoplastic-based composites for aeronautical applications. Composites Part B: Engineering, 2013, 45(1): 821-834.
[2] T.A. Martin, D. Bhattacharyya, I.F. Collins. Bending of fibre-reinforced thermoplastic sheets. Composite Manufacturing, 1995, 6(3-4):177-187.
[3] N.O. Cabrera, C.T. Reynolds, B. Alcock, et al. Non-isothermal stamp forming of continuous tape reinforced all-polypropylene composite sheet. Composites Part A: Applied Science and Manufacturing, 2008, 39(9): 1455-1466.
[4] T.G. 古托夫斯基. 先进复合材料制造技术. 北京: 化学工业出版社, 2004.
[5] M. Hou, K. Friedrich, R. Scherer. Optimization of stamp forming of thermoplastic composite bends. Composite Structures, 1994, 27(1-2): 157-167.
[6] J. Cao, R. Akkerman, P. Boisse, et al. Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results. Composites Part A: Applied Science and Manufacturing, 2008, 39(6):1037-1053.
[7] Thomas Gereke, Oliver Dbrich, Matthias Hübner, et al. Experimental and computational composite textile reinforcement forming: A review. Composites Part A: Applied Science and Manufacturing, 2013, 46: 1-10.
[8] M. Hou. Stamp forming of continuous glass fibre reinforced polypropylene. Composites Part A: Applied Science and Manufacturing, 1997, 28(8): 695-702.
[9] B. Zhu, T.X. Yu, H. Zhang, et al. Experimental investigation of formability of commingled woven composite perform in stamping operation. Composites Part B: Engineering, 2011, 42(2): 289-295.
[10] A.C. Long. Composites forming technologies. Woodhead publishing in textiles, 2007.
A. Willems, S.V. Lomov, I. Verpoest, et al. Optical strain fields in shear and tensile testing of textile reinforcements. Composites Science and Technology, 2008, 68(3-4): 807-819.
[11] P. Wang, N. Hamila, P. Boisse. Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix. Composites Part B: Engineering, 2013, 52: 127-136.
[12] V. Carvelli, C. Corazza, C. Poggi. Mechanical modelling of monofilament technical textiles. Computational Materials Science, 2008, 42(4): 679-691.
[13] U. Sachs, R. Akkerman, K. Fetfatsidis, et al. Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results. Composites Part A: Applied Science and Manufacturing, 2014, 67: 289-298.
[14] B. Liang, N. Hamila, M. Peillon, et al. Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations. Composites Part A: Applied Science and Manufacturing, 2014, 67: 111-122.
[15] 王涛. 复合材料构件纤维铺覆仿真及特征建模技术研究. 哈尔滨: 哈尔滨工业大学, 2013.
[16] T.G. Gutowski, G. Dillon, S. Chey, et al. Laminate wrinkling scaling laws for ideal composites. Composites Manufacturing, 1995, 6(3-4): 123-134.
[17] Q.Q. Chen, P. Boisse, C.H. Park, et al. Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes. Composite Structures, 2011, 93(7): 1692-1703.
[18] P. Harrison, W. Yu, A.C. Long. Rate dependent modelling of the forming behaviour of viscous textile composites. Composites Part A: Applied Science and Manufacturing, 2011, 42: 1719-1726.
[19] H. Lin, J. Wang, A.C. Long. Predictive modelling for optimization of textile composite forming. Composites Science and Technology, 2007, 67(15-16): 3242-3252.
[20] S.P. Haanappel, R.H.W. ten Thije, U. Sachs, et al. Formability analyses of uni-directional and textile reinforced thermoplastics. Composites Part A: Applied Science and Manufacturing, 2014, 56: 80-92.
[21] M. Hübner, O. Diestel, C. Sennewald, et al. Simulation of the drapability of textile semi-finished products with gradient-drapability characteristics by varying the fabric weave. Fibres & Textiles in Eastern Europe, 2012, 5(94): 88-93.
[22] M. Sadighi, E. Rabizadeh, F. Kermansaravi. Effects of laminate sequencing on thermoforming of thermoplastic matrix composites. Journal of Materials Processing Technology, 2008, 201(1-3): 725-730.
[23] M. Hou. Stamp forming of fabric-reinforced thermoplastic composites. Polymer composites, 1996, 17(4): 596-603.
[24] C.M. O' Bradaigh, R.B. Pipes. A punch deformation experiment for sheet forming of thermoplastic composites. Proceedings 3rd int. Conf. on Automated Composites, The Netherlands, 1991, 10: 15-17.
[25] P. Molnar, A. Ogale, R. Lahr, P. Mitschang. Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming. Composites Science and Technology, 2007, 67(15-16): 3386-3393.