复合材料加筋层合板准静态压痕实验研究及数值分析

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (11): 42-46.

复合材料加筋层合板准静态压痕实验研究及数值分析

黄飞生¹, 周仕刚^1*, 宫占锋², 罗腾腾²

1.同济大学航空航天与力学学院,上海 200092;
2.上海飞机设计研究院,上海 200232

收稿日期:2015-05-19 出版日期:2015-11-28 发布日期:2021-09-14
通讯作者: 周仕刚(1963-),男,教授,主要从事复合材料结构设计与教学工作,zhoushig@aliyun.com。
作者简介:黄飞生(1985-),男,硕士,主要从事复合材料力学方面的研究。

THE TEST AND FULL-RANGE NUMERICAL ANALYSIS OF COMPOSITE STIFFENED LAMINATES UNDER STATIC INDENTATION FORCE

HUANG Fei-sheng¹, ZHOU Shi-gang^1*, GONG Zhan-feng², LUO Teng-teng²

1. School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China;
2. Shanghai Aircraft Design and Research Institute, Shanghai 200232, China

Received:2015-05-19 Online:2015-11-28 Published:2021-09-14

摘要/Abstract

摘要： 利用ABAQUS有限元程序所建立了一种基于用户子程序USDFLD和Hashin强度准则的复合材料损伤计算模型,用该模型对复合材料加筋层合板在静压痕力作用下主要发生的纤维拉伸破坏、纤维微屈破坏、基体拉伸破坏、基体压缩破坏、层间拉伸破坏、层间压缩破坏这几种基本损伤模式进行分析。对复合材料加筋层合板在静压痕力作用下进行损伤全过程数值研究,利用该有限元模型预测复合材料层合板静压痕力作用下的荷载-位移曲线以及凹坑深度与静压痕力的关系曲线。数值仿真与实验结果吻合较好,表明该损伤模型方法的可行性。复合材料层合板加筋后拐点处的凹坑深度明显加大,达到0.84mm。通过对加筋板的刚度和强度失效规律的分析,为进一步的复合材料格栅加筋结构(如飞机结构中复合材料后压力框)的性能分析提供参考。

关键词: 复合材料加筋层合板, 静压痕力, 凹坑深度, Hashin准则, 损伤

Abstract: Based on the user subroutine USDFLD and Hashin's criteria, this paper presented a finite element composite stiffened laminates damage model by using ABAQUS software. Six basic damage models such as delamination, matrix crack and matrix compression, fiber fracture and fiber crush may happen when composite stiffened laminates are under static indentation force, the damage evolution of composite stiffened laminates can be simulated by this finite element damage model. Load-displacement curve and dent depth-load curve of composite laminates were predicted by the finite element composite stiffened laminates model. The computed results are in agreement with the corresponding experiment result, which proves the validity of the presented damage model. The pit depth of the composite stiffened laminates at the knee of curve increased obviously. Compared with unstiffened plate, the dent depth of the composite stiffened laminates came to 0.84mm,which was considered as a visible impact damage. The method and results concluded in the paper can be useful for the performance analysis of grid-stiffened composite structure such as the rear pressure bulkhead used in aircraft.

Key words: composite stiffened laminates, static indentation force, dent depth, Hashin's criteria, damage

中图分类号:

TB332

黄飞生, 周仕刚, 宫占锋, 罗腾腾. 复合材料加筋层合板准静态压痕实验研究及数值分析[J]. 复合材料科学与工程, 2015, 0(11): 42-46.

HUANG Fei-sheng, ZHOU Shi-gang, GONG Zhan-feng, LUO Teng-teng. THE TEST AND FULL-RANGE NUMERICAL ANALYSIS OF COMPOSITE STIFFENED LAMINATES UNDER STATIC INDENTATION FORCE[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(11): 42-46.

参考文献

[1] 蔡奕霖, 周仕刚, 宫占锋, 等. 复合材料格栅结构扁球壳的外压稳定性分析. 玻璃钢/复合材料,2012,(4): 41-45.
[2] 杨涵. 复合材料扁球壳的稳定和强度问题. 上海: 同济大学硕士学位论文, 2011. 1-70.
[3] 张志峰, 陈浩然, 白瑞祥. 先进复合材料格栅加筋圆柱壳体稳定性分析. 大连理工大学学报, 2008, 48(5): 631 -635.
[4] Lee SM, Zahuta P.Instrumented Impact and Static Indentation of Composites. Journal of Composite Materials, 1991, 25(2): 204-222.
[5] 王璐璐, 关志东. 复合材料层板静压入破坏机制. 复合材料学报, 2007, 24(6): 135-139.
[6] 张海清, 周仕刚, 宫占锋, 等. 复合材料层合板静压痕试验及全过程数值分析. 玻璃钢/复合材料, 2014, (11): 5-10.
[7] ASTM Standard D6264-98, Standard test method for measuring the damage resistance of a fiber-reinforced polymer-matrix composite to a concentrated quasi-static indentation force.
[8] 石亦平,周玉容.ABAQUS有限元分析实例详解. 北京:机械工业出版社,2006. 184-186.
[9] Hashin Z. Failure criteria for unidirectional fiber composites. Transactions of the Asme Journal of Applied Mechanics, 1980, 47(2): 329-334.
[10] Chang KY, Sheng L, Chang FK. Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Tensile Loadings. Journal of Composite Materials, 1991, 25(3):274-301.
[11] Maimi P, Camanho P P, Mayugo J A.A continuum damage model for composite laminates :Part II-computational implementation and validation.Mechanics of Materials, 2007,39(10):909-919.
[12] Barbero EJ, Cortes DH. A mechanistic model for transverse damage initiation, evolution, and stiffness reduction in laminated comp-osites. Composites Part B Engineering, 2010,41(2): 124-132.
[13] Murari V, Upadhyay C S. Micromechanics based ply level material degradation model for unidirectional composites. Composite Str-uctures, 2012, 94(2): 671-680.
[14] 沈真, 张子龙, 王进, 等. 复合材料损伤阻抗和损伤容限的性能表征. 复合材料学报, 2004, 21(5):140-143.
[15] 叶强, 王仁鹏, 陈普会, 等. 准静态压痕力作用下复合材料层合板的凹坑深度预测方法. 复合材料学报,2012, 29(1): 144-145.