树脂类型、玻纤布类型和厚度对真空灌注玻璃钢制品树脂含量的影响

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (11): 75-77.

树脂类型、玻纤布类型和厚度对真空灌注玻璃钢制品树脂含量的影响

王刚, 马艳梅, 董媛媛, 徐俊

中材科技(阜宁)风电叶片有限公司,盐城 224400

收稿日期:2015-05-20 出版日期:2015-11-28 发布日期:2021-09-14
作者简介:王刚(1984-),男,硕士,主要研究方向为风力发电机风轮叶片的制造工艺,mikewg@163.com。

EFFECT OF RESIN TYPE, FABRIC TYPE, THICKNESS ON RESIN CONTENT OF FRP BY VARI

WANG Gang, MA Yan-mei, DONG Yuan-yuan, XU Jun

Sinomatech(Funing) Wind Power Blade Co., Ltd., Yancheng 224400, China

Received:2015-05-20 Online:2015-11-28 Published:2021-09-14

摘要/Abstract

摘要： 研究了不同树脂类型、不同玻纤布类型和厚度通过真空灌注成型后玻璃钢的树脂含量。实验结果表明,三轴向玻纤布成型的玻璃钢样品树脂含量较高,而双轴向和单轴向玻纤布成型的玻璃钢样品树脂含量较低;与使用低粘度的035C/037树脂相比,使用高粘度的LR135/LH135树脂成型的玻璃钢样品树脂含量更低;随着玻纤布层数的增加,成型后玻璃钢样品树脂含量降低。

关键词: 树脂含量, 树脂类型, 玻纤布类型, 玻纤布厚度

Abstract: Effects of various resins, fabrics and thickness on resin content of glass-fiber reinforced plastic (GFRP) molded by vacuum assistant resin infusion process (VARI) were studied in this paper. Experimental results indicate that resin content of GFRP prepared with triaxial-fabrics is higher, while resin content of GFRP prepared with biaxial-fabrics and unidirectional-fabrics is lower. The resin content of GFRP prepared with high viscosity resin (LR135/LH135) is lower, while resin content of GFRP prepared with low viscosity resin system (035C/037) is higher. When the thickness of fabric increases, resin content of the GFRP decreases.

Key words: resin content, resin type, fabric type, fabric thickness

中图分类号:

TB332

王刚, 马艳梅, 董媛媛, 徐俊. 树脂类型、玻纤布类型和厚度对真空灌注玻璃钢制品树脂含量的影响[J]. 复合材料科学与工程, 2015, 0(11): 75-77.

WANG Gang, MA Yan-mei, DONG Yuan-yuan, XU Jun. EFFECT OF RESIN TYPE, FABRIC TYPE, THICKNESS ON RESIN CONTENT OF FRP BY VARI[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(11): 75-77.