铜/环氧复合材料导热性能的三维数值模拟研究

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (11): 9-14.

铜/环氧复合材料导热性能的三维数值模拟研究

陆曼¹, 鲍睿¹, 晏石林^1*, 邵世东²

1.武汉理工大学,武汉 430070;
2.中国电子科技集团公司第三十八研究所,合肥 230088

收稿日期:2015-05-08 出版日期:2015-11-28 发布日期:2021-09-14
通讯作者: 晏石林(1963-),男,教授,博士生导师,主要从事复合材料工艺与力学研究,yanshl507@126.com。
作者简介:陆曼(1990-),女,硕士研究生,研究方向为高导热聚合物基复合材料。
基金资助:
国家科技支撑计划(2015BAB07B04)

THREE-DIMENSIONAL NUMERICAL SIMULATION RESEARCH OF THERMAL CONDUCTIVITY OF Cu/EP COMPOSITE

LU Man¹, BAO Rui¹, YAN Shi-lin^1*, SHAO Shi-dong²

1. Wuhan University of Technology, Wuhan 430070, China;
2. The Thirty-eighth Research Institute of China Electronics Technology Group Corporation, Hefei 230088, China

Received:2015-05-08 Online:2015-11-28 Published:2021-09-14

摘要/Abstract

摘要： 通过数值模拟手段研究了铜/环氧树脂复合材料的导热性能。利用ANSYS/APDL参数化有限元分析技术,建立了铜颗粒随机分布的三维模型,研究了模型尺寸、铜颗粒的体积分数、粒径分布、颗粒尺寸、颗粒形貌以及颗粒在基体中的排列方式对导热系数的影响。模拟结果表明,当导热模型边长大于100μm时,复合材料的导热系数趋于稳定;铜/环氧复合材料导热系数随铜颗粒体积分数的增加而增加,且增加的幅度越来越大;填充相同粒径的颗粒和粒径服从正态分布的颗粒,材料的导热系数基本保持一致;复合材料的导热系数随颗粒尺寸的变化而波动;方形填料比球形填料更能提升材料的导热性能;填料在基体中排列方式不同,导热系数也不相同,填料沿热流方向定向排列时,增强作用显著。

关键词: 铜, 环氧树脂, 导热系数, 有限元分析

Abstract: Thermal conductivity of Cu/EP composite was studied by numerical simulation method. A 3D model of particles random distribution was established by ANSYS/APDL parametric finite element analysis technology. The effect of model size, volume fraction, single particle size or normal distribution particle sizes, particle shape, particle size and particles distribution on thermal conductivity of Cu/EP composites were investigated. The simulation results show that when the length of thermal conductivity model is greater than 100μm, the thermal conductivity is close to stabilization. Thermal conductivity of Cu/EP composite increases with volume fraction, and the magnitude of increase becomes bigger and bigger. Filling same particle size particles and normal distribution particle sizes particles, thermal conductivities of them keep pace with each other. Particle size has effect on thermal conductivity, and the change law is not monotonous increasing or decreasing. Cube fillers enhance the performance of thermal conductivity better than sphere fillers. The thermal conductivity will be different for different particles distribution in the matrix. When the particles are arranged along the direction of heat flow, the enhancement is significant.

Key words: copper, EP, thermal conductivity, finite element analysis

中图分类号:

TB332

陆曼, 鲍睿, 晏石林, 邵世东. 铜/环氧复合材料导热性能的三维数值模拟研究[J]. 复合材料科学与工程, 2015, 0(11): 9-14.

LU Man, BAO Rui, YAN Shi-lin, SHAO Shi-dong. THREE-DIMENSIONAL NUMERICAL SIMULATION RESEARCH OF THERMAL CONDUCTIVITY OF Cu/EP COMPOSITE[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(11): 9-14.

参考文献

[1] 孔娇月, 陈立新, 蔡聿锋. 导热高分子复合材料研究进展. 中国塑料, 2011, (3):7-12.
[2] 范伟, 冯刚, 赵加伟. 导热高分子复合材料的研究与应用进展. 工程塑料应用, 2011, 39(12):101-104.
[3] 陈平, 刘胜平. 环氧树脂. 北京:化学工业出版社, 1999. 215-217.
[4] 刘科科, 汪涛, 蔚永强,等. 高分子复合材料用导热填料研究进展. 塑料工业, 2013, 41(4):6-9.
[5] Nan C W, Birringer R, Clarke D R, et al. Effective thermal conductivity of particulate composites with interfacial thermal resistance. Journal of Applied Physics, 1997, 81(10):6692-6699.
[6] Agari Y, Uno T. Estimation on thermal conductivities of filled polymers. Journal of Applied Polymer Science, 2003, 32(7):5705-5712.
[7] 闫刚, 魏伯荣, 杨海涛, 等. 聚合物基复合材料导热模型及其研究进展. 玻璃钢/复合材料, 2006, (3):50-52.
[8] 丁峰, 谢维章. 导热树脂基复合材料. 复合材料学报, 1993, (3):19-24.
[9] 阳熵铖, 杨海, 陈福泉, 等. PP/AlN复合材料导热机理研究. 塑料科技, 2013, (4).
[10] Ramani K, Vaidyanathan A. Finite Element Analysis of Effective Thermal Conductivity of Filled Polymeric Composites. Journal of Composite Materials, 1995, 29(13):1725-1740.
[11] Kumlutas D, Tavman I H. A Numerical and Experimental Study on Thermal Conductivity of Particle Filled Polymer Composites. Journal of Thermoplastic Composite Materials, 2006, 19(4):441-455.
[12] 刘加奇, 张立群, 杨海波, 等. 粒子填充聚合物基复合材料导热性能的数值模拟. 复合材料学报, 2009, 26(1):36-42.
[13] 田志红, 范华乐, 张浩, 等. AlN填充有机灌封硅橡胶导热性能的数值模拟. 复合材料学报, 2011, 28(3).
[14] Jeulin D, Kanit T, Mounoury V, et al. Determination of The Size of The Representative Volume Element for Random Composites: Statistical And Numerical Approach. International Journal of Solids & Structures, 2003, 40(13):3647-3679.
[15] Annapragada S R, Sun D, Garimella S V. Prediction of effective thermo-mechanical properties of particulate composites. Computational Materials Science, 2007, 40(2):255-266.