基于数字图像相关方法的含双裂纹复合材料薄板应力强度因子测量

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (4): 22-26.

基于数字图像相关方法的含双裂纹复合材料薄板应力强度因子测量

郝文峰^1*, 原亚南², 姚学锋², 马寅佶²

1.北京航空材料研究院航空材料检测与评价北京市重点实验室,北京100095;
2.清华大学工程力学系,北京100084

收稿日期:2014-10-31 出版日期:2015-04-28 发布日期:2021-09-14
作者简介:郝文峰(1985-),男,工学博士,工程师,主要研究方向为实验力学、复合材料力学,haowenfeng2007@163.com。
基金资助:
国家973计划资助项目(2011CB606105)

MEASUREMENT OF MODE-I STRESS INTENSITY FACTOR IN A DOUBLE-CRACKED COMPOSITE SHEET USING DIGITAL IMAGE CORRELATION METHOD

HAO Wen-feng^1*, YUAN Ya-nan², YAO Xue-feng², MA Yin-ji²

1. Beijing Key Laboratory of Aeronautical Materials Testing and Evaluation,Beijing Institute of Aeronautical Materials, Beijing 100095, China;
2. Department of Engineering Mechanics, Applied Mechanics Lab, Tsinghua University, Beijing 100084, China

Received:2014-10-31 Online:2015-04-28 Published:2021-09-14

摘要/Abstract

摘要： 将数字图像相关方法用于测量含I型双边裂纹复合材料薄板应力强度因子。首先,介绍了数字图像相关方法基本原理,通过最小二乘拟合法建立了裂纹尖端位移场与裂尖应力强度因子的关系。其次,搭建了数字图像相关方法非接触光学测试平台,通过对含I型双边裂纹复合材料薄板进行拉伸试验,得到了复合材料薄板双边裂纹尖端全场位移。最后,通过数字图像相关方法计算所得全场位移,提取了裂纹尖端应力强度因子,分析了最小二乘拟合项数、数字图像相关计算中子区域和步长大小的选择对裂纹尖端应力强度因子计算的影响。

关键词: 复合材料薄板, 数字图像相关, 最小二乘拟合, 应力强度因子, 裂纹

Abstract: Digital image correlation method was used to measure mode-I stress intensity factor in a double-cracked composite sheet. First, the principle of DIC was introduced, and the relationship between the stress intensity factor and the displacement at the crack tip was established based on least square fitting. Then, the non-contact optical measurement system of DIC was built up, and the full field displacements at the crack tip were obtained by tensile experiments using double-cracked composite sheets. Finally, the stress intensity factors were extracted from the full field displacements, and the effects of least square fitting terms, sub size and sub spacing of DIC on the stress intensity factors were analyzed.

Key words: composite sheet, digital image correlation method, least square fitting, stress intensity factor, crack

中图分类号:

TB332
O348.1

郝文峰, 原亚南, 姚学锋, 马寅佶. 基于数字图像相关方法的含双裂纹复合材料薄板应力强度因子测量[J]. 复合材料科学与工程, 2015, 0(4): 22-26.

HAO Wen-feng, YUAN Ya-nan, YAO Xue-feng, MA Yin-ji. MEASUREMENT OF MODE-I STRESS INTENSITY FACTOR IN A DOUBLE-CRACKED COMPOSITE SHEET USING DIGITAL IMAGE CORRELATION METHOD[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(4): 22-26.

参考文献

[1] 郝文峰, 葛东云, 马寅佶, 等. 复合材料襟翼壁板屈曲失稳行为的栅线投影实验研究[J]. 实验力学,2012,27(05):570-575.
[2] Carboni M. Strain-gauge compliance measurements near the crack tip for crack closure evaluation: Applicability and accuracy[J]. Engineering Fracture Mechanics, 2007,74(4):563-577.
[3] Dorogoy A, Rittel D. Optimum location of a three strain gauge rosette for measuring mixed mode stress intensity factors[J]. Engineering Fracture Mechanics, 2008,75(14):4127-4139.
[4] 赵岍, 孙燕君. 动光弹断裂中确定应力强度因子的方法[J]. 北方交通大学学报,1986,(04):35-44.
[5] Guagliano M, Sangirardi M, Vergani L. Photoelastic methods to determine KI, KII and KIII of internal cracks subjected to mixed mode loading[J]. International Journal of Fatigue, 2006,28(5-6):576-582.
[6] Kokaly MT, Lee J, Kobayashi AS. Moiré interferometry for dynamic fracture study[J]. Optics and Lasers in Engineering, 2003,40(4):231-247.
[7] Melin LG, Goldrein HT, Huntley JM, Nilsson S, Palmer SJP. A study of Mode-I delamination cracks by high-magnification moiré interferometry [J]. Composites Science and Technology, 1998, 58(3-4):515-525.
[8] Dehnavi MY, Khaleghian S, Emami A, Tehrani M, Soltani N. Utilizing digital image correlation to determine stress intensity factors[J]. Polymer Testing, 2014,37:28-35.
[9] Kashfuddoja M, Prasath RGR, Ramji M. Study on experimental characterization of carbon fiber reinforced polymer panel using digital image correlation: A sensitivity analysis[J]. Optics and Lasers in Engineering, 2014,62:17-30.
[10] 孟立波. 数字散斑相关方法的研究和应用[D]. 北京:清华大学, 2005.
[11] 陈华. 基于数字散斑相关方法的视觉变形测量技术研究[D].哈尔滨:哈尔滨工业大学, 2008.
[12] Ma YJ, Xiong TC, Yao XF. Experimental investigation of interface curing stresses between PMMA[J]. Theoretical & Applied Mechanics Letters, 2011, 1(5).
[13] Ma YJ, Yao XF, Zhang DW. Axially symmetrical stresses measurement in the cylindrical tube using DIC with hole-drilling[J]. Optics and Lasers in Engineering, 2015, 66:174-180.
[14] Yao X F, Jin G C, Meng L B. Deformation study on carbon-fiber braided composite subjected to low temperature cycle[J]. Proceedings of SPIE-The International Society for Optical Engineering, 2001, 4317: 192-197.
[15] Ma YJ, Yao XF, Zheng QS, et al. Carbon nanotube films change Poisson's ratios from negative to positive[J]. Applied Physics Letters, 2010,97(6).
[16] Ma YJ, Yao XF, Wang D. Experimental investigation on mechanical properties of CNT film using digital speckle correlation method[J]. Optics and Lasers in Engineering, 2012, 50(11): 1575-1581.
[17] Hao WF, Ge DY, Ma YJ, Yao XF, SHi Y. Experimental investigation on deformation and strength of carbon/epoxy laminated curved beams[J]. Polymer Testing, 2012, 31(4): 520-526.
[18] Yoneyama S, Morimoto Y, Takashi M. Automatic evaluation of mixed-mode stress intensity factors utilizing digital image correlation[J]. Strain, 2006, 42:21-29.
[19] Eshraghi I, Yadegari Dehnavi MR, Soltani N. Effect of subset parameters selection on the estimation of mode-I stress intensity factor in a cracked PMMA specimen using digital image correlation[J]. Polymer Testing, 2014, 37: 193-200.