预浸料在RTM工艺中的应用研究

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (4): 71-75.

预浸料在RTM工艺中的应用研究

何先成^*, 刘刚, 包建文

北京航空材料研究院先进复合材料重点实验室,中航工业复合材料技术中心,中航复合材料有限责任公司,北京100095

收稿日期:2014-11-23 出版日期:2015-04-28 发布日期:2021-09-14
作者简介:何先成(1985-),男,硕士,工程师,主要从事树脂基复合材料研究。

APPLICATION OF PREPREG IN RTM PROCESS

HE Xian-cheng^*, LIU Gang, BAO Jian-wen

Science and Technology on Advanced Composites Laboratory, Beijing Institute of Aeronautics Materials,AVIC Composite Center, AVIC Composite Corporation Ltd., Beijing 100095, China

Received:2014-11-23 Online:2015-04-28 Published:2021-09-14

摘要/Abstract

摘要： 采用共固化RTM工艺制备了碳纤维增强环氧树脂5284RTM/5228A复合材料层板。通过超声C扫描和显微分析法评价了层板的内部质量,通过短梁剪切强度和弯曲性能研究了层板的力学性能,利用DMA评价了层板的耐热性能。结果表明,所制备的层板内部质量良好,预浸料层的预处理对层板的内部质量、力学性能和耐热性能都没有明显影响,而热固性中介层的引入虽然不会影响体系的内部质量和力学性能,但会使层板的耐热性能降低。

关键词: 复合材料, 树脂传递模塑, 预浸料, 共固化, 中介层, 预处理

Abstract: The carbon fiber reinforced epoxy resin 5284RTM/5228A composite laminates were fabricated via co-cured RTM process. The internal quality of laminates was analyzed using Ultrasonic C-Scan inspection and microscopic analysis, short beam shear strength and bending properties were measured to evaluate the inter-laminar property of laminates, and thermal properties were determined by DMA. The results show that the pretreatment of the prepreg layer has no significant effect on the internal quality, the mechanical property, and the heat resistance of laminates. Besides the application of thermosetting medi-layer did not affect the internal quality and the mechanical property, but caused the reduction of the heat resistance of laminates.

Key words: composite, RTM, prepreg, co-cured, medi-layer, pretreatment

中图分类号:

TB332

何先成, 刘刚, 包建文. 预浸料在RTM工艺中的应用研究[J]. 复合材料科学与工程, 2015, 0(4): 71-75.

HE Xian-cheng, LIU Gang, BAO Jian-wen. APPLICATION OF PREPREG IN RTM PROCESS[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(4): 71-75.

参考文献

[1] 包建文. 高效低成本复合材料及其制造技术[M]. 北京: 国防工业出版社, 2012.17-20.
[2] Husmann C H, Sheu C H, Shinazu D M. Co-cured resin transfer molding manufacturing method[P]. US patent: US 7374715 B2, 2008-05-20.
[3] 许亚洪. 巡航导弹树脂基结构复合材料的应用与发展[J]. 热固性树脂,2008, 23(S): 36-38.
[4] 杨炳渊. 超高速防空导弹结构防热技术[J]. 上海航天, 2002, (4): 41-45.
[5] Gillio E F, Mcknight G P, Gillespie J W Jr, et al. Processing and properties of co-injected resin transfer molded vinyl ester and phenolic composites[J]. Polymer Composites, 1999,20(6):780-788.
[6] Harkare A , Gillespie J W Jr. In situ barrier layer formation for coinjection resin transfer molding[J]. Journal of Thermoplastic Composite Materials, 2004,17(5):387-409.
[7] 尹昌平. 共注射RTM制备承载/隔热/防热一体化复合材料[D]. 长沙: 国防科学技术大学,2009.
[8] 刘刚, 李伟东, 何先成, 等. 一种预浸料闭模液压辅助成型工艺方法[P]. 中国专利: 201310646991.6,2014-07-16.
[9] 王炯, 李敏, 顾轶卓, 等. 炭纤维复合材料共固化液体成型工艺及层间性能研究[J]. 材料工程,2013, (2):93-98.
[10] 马绪强, 顾轶卓, 李敏, 等. 共固化RTM工艺碳纤维复合材料层板力学性能研究[C]. 北京: 第17届全国复合材料学术会议论文集, 2012. 622-625.
[11] 郑亚萍, 陈伟, 李江红, 等. RTM和预浸料共固化树脂体系界面层特性[J]. 复合材料学报, 2013, 30(3): 35-38.
[12] Y.Onur Kas, Cevdet Kaynak. Ultrasonic (C-scan) and microscopic evaluation of resin transfer molded epoxy composite plates[J]. Polymer Testing, 2005,24(1):114-120.
[13] Kaynak C, Akgul E, Isitman N A. Effects of RTM Mold Temperature and Vacuum on the Mechanical Properties of Epoxy/Glass Fiber Composite Plates[J]. Journal of Composite Materials, 2008,42(15):1505-1521.
[14] 陈祥宝. 聚合物基复合材料手册[M]. 北京: 化学工业出版社, 2004. 63-65.
[15] 杨序纲. 复合材料界面[M]. 北京: 化学工业出版社, 2010.63-64.