聚三唑树脂的耐热性研究进展

复合材料科学与工程 ›› 2015, Vol. 0 ›› Issue (9): 93-98.

聚三唑树脂的耐热性研究进展

沈镇^*, 曾金芳, 王秀云

西安航天复合材料研究所,西安 710025

收稿日期:2015-04-13 出版日期:2015-09-28 发布日期:2021-09-14
作者简介:沈镇(1991-),男,硕士,主要从事复合材料纤维、基体、界面的研究。

PROGRESS OF RESEARCH ON THE HEAT RESISTANCE OF POLYTRIAZOLE RESIN

SHEN Zhen^*, ZENG Jin-fang, WANG Xiu-yun

Xi'an Aerospace Composites Research Institute, Xi'an 710025, China

Received:2015-04-13 Online:2015-09-28 Published:2021-09-14

摘要/Abstract

摘要： 概述了提高聚三唑树脂耐热性的主要方法,重点介绍了化学结构、固化条件以及纳米填料对聚三唑树脂耐热性和力学性能影响的研究进展,最后简要分析了目前聚三唑树脂耐热性研究中存在的问题以及发展前景。

关键词: 聚三唑树脂, 耐热性, 后固化, 改性

Abstract: In this paper, the methods of improving the heat resistance of polytriazole resin were generalized. The present situations of the effects of chemical structural frame, curing condition and nano materials on the heat resistance and mechanical properties of polytriazole resin were emphatically introduced. Finally, some problems on the present study and the development prospect of the improvement of heat resistance of polytriazole resin were also investigated.

Key words: polytriazole resin, heat resistance, postcure, modification

中图分类号:

TB332

沈镇, 曾金芳, 王秀云. 聚三唑树脂的耐热性研究进展[J]. 复合材料科学与工程, 2015, 0(9): 93-98.

SHEN Zhen, ZENG Jin-fang, WANG Xiu-yun. PROGRESS OF RESEARCH ON THE HEAT RESISTANCE OF POLYTRIAZOLE RESIN[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(9): 93-98.

参考文献

[1] Johnson K E, Lovinger J A, Parker C O, et al. 1,3-Dipolar cycloaddition polymerization of 4-azido-1-butyne. Journal of Polymer Science Part B: Polymer Letters, 1966, 4(12): 977-979.
[2] 王晓飞, 万里强, 黄发荣, 等. 聚三唑树脂/T700碳纤维复合材料的成型工艺研究. 复合材料:创新与可持续发展 (上册). 2010. 405-408.
[3] 张娜, 谭美军, 刘雷. 高耐热环氧树脂研究现状. 包装工程, 2010, 31(13): 117-121.
[4] Wan L Q, Luo Y H, Xue L, et al. Preparation and properties of a novel polytriazole resin. Journal of Applied Polymer Science, 2007, 104(2): 1038-1042.
[5] Xue L, Wan L Q, Hu Y H, et al. Thermal stability of a novel polytriazole resin. Thermochimica Acta, 2006, 448(2): 147-153.
[6] Li Y J, Zhou H, E Y P, et al. Synthesis and characterization of a new series of rigid polytriazole resins. Designed Monomers and Polymers, 2013, 16(6): 556-563.
[7] 扈艳红, 刘世领, 仝钦宇, 等. 1,3-偶极环加成反应合成1-(取代苄基)-1,2,3-三唑类化合物. 有机化学, 2004, 24(10):1228-1232.
[8] Boroujeni K P, Soltanian I, Shirazi A N. Synthesis and characterization of some new aromatic polytriazoles as proton conductive membranes. Polymer Bulletin, 2013, 70(8): 2411-2422.
[9] Tian J J, Wan L Q, Huang J Z, et al. Preparation and properties of a new polytriazole resin made from dialkyne and triazide compounds and its composite. Polymer Bulletin,2008,60(4):457-465.
[10] Wang X F, Zhao Z F, Tian J J, et al. Synthesis and Characterization of a New Polytriazole Resin Derived from N,N-Dipropargyl-p-propargyloxyaniline. Polymer Journal, 2009, 41(6): 498-502.
[11] Tian J J, Wan L Q, Huang J Z, et al. Synthesis and characterization of a novel polytriazole resin with low-temperature curing character. Polymers for Advanced Technologies,2007, 18(7): 556-561.
[12] Huang J X, Wan L Q, Zhang J, et al. Synthesis and characterization of a novel silicon-containing polytriazole resin. Journal of Applied Polymer Science, 2009, 114(3): 1725-1730.
[13] 齐会民, 王光后, 张健, 等. 含硅芳炔树脂的改性及其性能研究. 第十五届全国复合材料学术会议论文集. 哈尔滨:中国力学学会, 2008. 335-339.
[14] 吴长伟, 杜磊, 唐磊, 等. 新型共聚三唑树脂体系的研究. 绝缘材料, 2013, 46(4): 1-4.
[15] 李孝兰, 段华军, 王钧, 等. 乙烯基树脂后固化制度的优化研究. 热固性树脂, 2012, 27(5): 40-43.
[16] 周浩, 李瑜婧, 万里强, 等. 石英纤维增强聚三唑树脂复合材料性能研究. 玻璃钢/复合材料, 2013,(6): 13-16.
[17] 许建文, 万里强, 张存超, 等. 聚三唑树脂的催化固化及其复合材料制备与性能. 玻璃钢/复合材料,2014,(8): 35-40.
[18] 张存超, 万里强, 许建文, 等. 聚三唑/碳纳米管复合材料的制备与性能研究. 材料研究学报, 2014, 28(7): 555-560.
[19] Ye Y S, Yen Y C, Cheng C C, et al. Polytriazole/clay nanocomposites synthesized using in situ polymerization and click chemistry. Polymer, 2010,51(2): 430-436.
[20] Huang Y J, Ye Y S, Syu Y J, et al. Synthesis and characterization of sulfonated polytriazole-clay proton exchange membrane by in situ polymerization and click reaction for direct methanol fuel cells. Journal of power sources, 2012, 208(2): 144-152.