温度载荷对复合材料热力学性能的影响

玻璃钢/复合材料 ›› 2016, Vol. 0 ›› Issue (10): 42-49.

温度载荷对复合材料热力学性能的影响

高红成¹,黄其忠^1*,马帅²,胡照会¹

1.北京玻钢院复合材料有限公司,北京102101;
2.大连理工大学工业装备结构分析国家重点实验室,大连116023

收稿日期:2016-03-15 出版日期:2016-11-25 发布日期:2016-11-25
通讯作者: 黄其忠(1983-),男,博士,高级工程师,主要从事复合材料结构设计方面的研究,qizhongh@126.com。
作者简介:高红成(1975-),男,研究生,高级工程师,主要从事复合材料新产品、新技术方面的研究。

THE INFLUENCE OF TEMPERATURE ON THE THERMODYNAMICS PROPERTIES OF COMPOSITES

GAO Hong-cheng¹, HUANG Qi-zhong¹, MA Shuai², HU Zhao-hui¹

1.Beijing Composite Materials Co., Ltd., Beijing 102101, China;
2.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China

Received:2016-03-15 Online:2016-11-25 Published:2016-11-25

摘要/Abstract

摘要： 由于复合材料内部纤维与树脂的热膨胀系数差异很大,尤其是树脂性能对温度载荷较为敏感,服役时复合材料环境的高低温变化将使其热力学性能与常温状态产生较大差异。采用Maxwell本构模型,探讨了温度变化对树脂材料本构关系的影响。假设纤维为稳定材料,即其性能不随温度变化,依据复合材料细观力学理论选择六边形代表体积元为分析对象,建立了复合材料在温度载荷下热力学的本构模型。并分别讨论了温度载荷下复合材料内部纤维体分比和纤维排列方式变化对其热力学性能的影响,实现了热-力耦合作用下复合材料的跨尺度分析。

关键词: 复合材料, 本构, 跨尺度, 细观力学有限元

Abstract: As the temperature of severing environment variating severely, there would be a great alteration in the thermodynamics properties of composites. Due to the great difference of thermal expansion coefficient between internal fiber and resin in the composites, the resin performance is more sensitive to temperature environment. In this paper, based on the Maxwell constitutive model, the relationship between resin constitutive and temperature is studied. Assuming that the fiber performance does not vary with temperature, according to the mesoscopic composite theory, a hexagon representative volume element is employed, and the finite element method (FEM) is adopted to establish the thermodynamics constitutive model of composites under temperature. The influence of fiber arrangement and fiber content on the composites thermodynamics constitutive is discussed, respectively. The process would be applied for a multi-scale solution for composite under thermodynamics coupling loads.

Key words: composite, constitutive, multi-scale, micromechanics FEM

中图分类号:

TB332

高红成,黄其忠,马帅,胡照会. 温度载荷对复合材料热力学性能的影响[J]. 玻璃钢/复合材料, 2016, 0(10): 42-49.

GAO Hong-cheng, HUANG Qi-zhong, MA Shuai, HU Zhao-hui. THE INFLUENCE OF TEMPERATURE ON THE THERMODYNAMICS PROPERTIES OF COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2016, 0(10): 42-49.

参考文献

[1] Reed R P, Golda M. Cryogenic composite supports: a review of strap and strut properties[J]. Cryogenics, 1997, 37(5): 233-250.
[2] 马帅. 低温复合材料贮箱跨尺度层次化分析[D]. 大连: 大连理工大学, 2014.
[3] Schutz J B. Properties of composite materials for cryogenic applications[J]. Cryogenics, 1998, 38(1): 3-12.
[4] 王嵘, 郝春功, 陈振坤, 等. 混合型固化剂对环氧树脂室温和低温力学性能的影响[J]. 复合材料学报, 2008(04): 7-12.
[5] 尹志娟, 王丽雪, 姜珊. 玻璃纤维增强环氧树脂基复合材料的低温性能研究[J]. 黑龙江工程学院学报(自然科学版), 2010(01): 50-52.
[6] Ueki T, Nishijima S, Izumi Y. Designing of epoxy resin systems for cryogenic use [J].Cryogenics, 2005, 45(2):141-148.
[7] 王嵘, 郝春功, 陈振坤, 等. 碳纤维增强环氧树脂室温低温力学性能的研究[C]//第十七届玻璃钢/复合材料学术年会. 中国广东广州, 2008.
[8] Hou T Y, Wu X H, Cai Z. Convergence of a multiscale finite element method for elliptic problems with rapidly oscillating coefficients[J]. Math Comp,1988, 68: 913-943.
[9] 范建华, 许庆余, 孙秦, 等. 一种通用的计算复合材料刚度的有限元方法[J]. 工程力学, 2002(04):166-170.
[10] 吴世平, 唐绍锋, 梁军, 等. 周期性复合材料热力耦合性能的多尺度方法[J].哈尔滨工业大学学报, 2006(12): 2049-2053.
[11] 曹礼群, 崔俊芝. 复合材料拟周期结构的均匀化方法[J]. 计算数学, 1999, 21(3): 331-344.
[12] Yamini S, Young R J. The mechanical properties of epoxy resins. Part I, mechanisms of plastic deformation[J]. Journal of Materials Science, 1981, 15:1814-1822.
[13] Choi S. Micromechanics, fracture mechanics and gas permeability of composite laminates for cryogenic storage systems[D]. Florida: University of Florida, 2005.
[14] Hui D, Dutta P K. Cryogenic temperature effects on performance of polymer composites[R]. 2002.
[15] Yu Y H, Kim B G, Lee D G. Cryogenic reliability of composite in-sulation panels for liquefied natural gas (LNG) ships[J].Composite Structures, 2012, 94(2):462-468.
[16] Roy S, Benjamin M. Modeling of permeation and damage in graphite/epoxy laminates for cryogenic fuel storage[J]. Composites Science and Technology, 2004, 64(13-14): 2051-2065.
[17] 沈观林, 胡更开. 复合材料力学[M]. 北京: 清华大学出版社, 2006.