全球降水观测卫星用复合材料燃料箱

玻璃钢/复合材料 ›› 2016, Vol. 0 ›› Issue (10): 95-97.

• 综述 • 上一篇

全球降水观测卫星用复合材料燃料箱

王丽,丁新静

哈尔滨玻璃钢研究院,哈尔滨150036

收稿日期:2016-06-28 出版日期:2016-11-25 发布日期:2016-11-25
作者简介:王丽(1969-),女,硕士,主要从事复合材料方面的研究。

COMPOSITE FUEL TANKS FOR THE GLOBAL PRECIPITATION MEASUREMENT SATELLITE

WANG Li, Ding Xin-Jing

Harbin FRP Institute, Harbin 150036, China

Received:2016-06-28 Online:2016-11-25 Published:2016-11-25

摘要/Abstract

摘要： 介绍了全球降水量观测气象卫星的重要结构部件——复合材料燃料箱。这种复合材料燃料箱在返回阶段可烧毁,从而避免产生太空垃圾,降低了对人类和环境的损害。阐述了可消亡的复合材料燃料箱的设计要求,然后从构成燃料箱的铝推进剂管理装置、内衬、压力容器等各部构件结构方面,重点综述了纤维缠绕箱体和裙的预浸料铺放工艺及各部分的连接。最后认为国外研发的复合材料可烧毁燃料箱有巨大的应用前景和太空环保意义。

关键词: 全球降水观测卫星, 复合材料燃料箱, 纤维缠绕, 预浸料铺放

Abstract: In this paper, composite fuel tank for the Global Precipitation Measurement Satellite was introduced, which could be demised during the reentry and decrease the space trash and the damage to human beings and the environment. The design requirements were illustrated from the pressure, operating temperature and light weight, etc. And the fiber-wound tank and prepreg layup skirts and their joints were discussed from the components including PMD, liners and pressure cylinder. Finally, it was thought that the tank has the bright future in satellite application and the further significance in space environment protection.

Key words: space environment protection, global precipitation measurement, composite fuel tank, prepreg layup

中图分类号:

TB332

王丽,丁新静. 全球降水观测卫星用复合材料燃料箱[J]. 玻璃钢/复合材料, 2016, 0(10): 95-97.

WANG Li, Ding Xin-Jing. COMPOSITE FUEL TANKS FOR THE GLOBAL PRECIPITATION MEASUREMENT SATELLITE[J]. Fiber Reinforced Plastics/Composites, 2016, 0(10): 95-97.

参考文献

[1] 唐国强, 等. 全球降水测量(GPM)计划及其最新进展综述[J]. 遥感技术与应用, 2015(4): 25-30.
[2] 武永琴. 航空复合材料技术发展的回顾及展望[J]. 科技创新与应用, 2015(17):3-9.
[3] 唐见茂. 航空航天复合材料发展现状及前景[J]. 航天器环境工程, 2013(04): 34-38.
[4] San J. Parametric Study of a Demiseable Propulsion Tank[M]. Washington, D, C: Internal Goddard Space Flight Center white paper, 2002: 156-179.
[5] Estes R H, Moore N R. An Overview of Demise Calculations, Conceptual Design Studies, and Hydrazine Compatibility Testing for the GPM Core Spacecraft Propellant Tank[C]//JANNAF JPM/LPS/SPS/MSS Joint Meeting. Denver: 2007: 39-41.
[6] Hull S. GPM Mission Propulsion Tank Study[M]. Washington,D,C: Internal Goddard Space Flight Center white paper, 2003: 106-127.
[7] Moore N R. Demiseable Tank Concept Study for the Global Precipitation Measurement Mission[C]// Hamilton Sundstrand and Angeles Crest Engineering. California. 2004: 224-229.
[8] Estes, Robert H, Moore NR. Development and Implementation of a Process for Producing A Highly Wettable Aluminum PMD[C]//48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. Atlanta: 2012: 451-468.
[9] Webster, Graham. Contamination Control of the Global Precipitation Measurement Mission Propellant Tank[C]//48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. Atlanta: 2012: 589-596.
[10] Bogetti T A, Gillespie J W. Process-induced stress and deformation in thick-section thermoset composite laminates[J]. Journal of Composite Materials, 1992(01): 51-56.
[11] Yoel Tenne. An Optimization Algorithm Employing Multiple Metamodels and Optimizers[J]. International Journal of Automation and Computing, 2013(03): 63-71.[12] G.T.Huntington, D.A.Benson, A.V.Rao. A comparison of accuracy and computational efficiency of three pseudospectral methods[C]// Proceedings of Guidance, Navigation, and Control Conference. 2007: 145-156.
[13] J.Ruths,A. Zlotnik,S. Li.Convergence of a pseudospectral method for optimal control of complex dynamical systems[C]// Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference. 2011: 251-262.
[14] Francisco J. Tapiador, F.J. Turk Huffman, Manuel de Castro. Global precipitation measurement: Methods, datasets and applications[J]. Atmospheric Research, 2011(03): 61-69.

[1]	祖磊, 肖康, 张骞, 张桂明, 吴乔国, 李德宝. 不等极孔纤维缠绕线型轨迹及工艺研究[J]. 复合材料科学与工程, 2021, 0(7): 48-54.
[2]	祖磊, 金书明, 张骞, 张桂明, 吴乔国. 基于精细化模型的纤维缠绕压力容器失效行为及容积特性影响因素分析[J]. 复合材料科学与工程, 2021, 0(12): 40-47.
[3]	秦小强, 邓贵德, 梁海峰. 自紧压力对全缠绕复合气瓶疲劳性能的影响[J]. 复合材料科学与工程, 2020, 0(6): 57-61.
[4]	王华毕, 程硕, 祖磊, 张骞. 复合材料储氢气瓶的纤维厚度预测与强度分析[J]. 复合材料科学与工程, 2020, 0(5): 5-11.
[5]	崔政粱, 刘强, 赖丽萍. 碳纤维缠绕复合铝圆管轴向压溃力学性能研究[J]. 复合材料科学与工程, 2020, 0(2): 5-9.
[6]	田会方, 张阳, 吴迎峰, 王森. 纤维缠绕自动挑剪/挂纱机构剪切实验研究[J]. 复合材料科学与工程, 2020, 0(11): 76-80.
[7]	田会方, 康伟, 张阳, 吴迎峰. 一种纤维缠绕机自动挂纱夹持机构的设计与验证[J]. 玻璃钢/复合材料, 2019, 0(3): 61-64.
[8]	YUNUSA Mujaheed, 祖磊, TAPA Arnauld Robert. 铝内衬碳纤维复合材料压力容器非测地线缠绕与强度分析[J]. 玻璃钢/复合材料, 2019, 0(12): 54-61.
[9]	郑善朴, 陆铭慧, 刘磨, 江宪荣. 背散射技术对缠绕复合材料均匀性的表征[J]. 玻璃钢/复合材料, 2019, 0(1): 87-90.
[10]	徐东亮, 王成, 徐征, 朱炯滔. 多工位数控纤维缠绕机的研究与设计[J]. 玻璃钢/复合材料, 2018, 0(6): 89-93.
[11]	惠鹏,祖磊,李书欣,汪洋. 大张力缠绕碳纤维复合材料高速飞轮转子研究[J]. 玻璃钢/复合材料, 2018, 0(3): 5-12.
[12]	刘萌, 祖磊, 李书欣, 汪洋. 复合材料球形气瓶非测地线缠绕线型设计和强度分析[J]. 玻璃钢/复合材料, 2018, 0(2): 8-14.
[13]	舒明杰,李云仲,刘翀. 复合材料压力容器自紧后残余变形研究及有限元分析[J]. 玻璃钢/复合材料, 2017, 0(9): 73-77.
[14]	田会方, 周承光, 张军伟. 基于Creo和ADAMS的纤维缠绕机挂纱机构设计与仿真[J]. 玻璃钢/复合材料, 2017, 0(5): 80-83.
[15]	周帆,祖磊,李书欣. 高速永磁电机转子碳纤维护套的缠绕张力计算研究[J]. 玻璃钢/复合材料, 2017, 0(12): 5-13.

全球降水观测卫星用复合材料燃料箱

COMPOSITE FUEL TANKS FOR THE GLOBAL PRECIPITATION MEASUREMENT SATELLITE

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价