双轴向经编和三维正交机织增强复合材料拉伸性能实验研究

玻璃钢/复合材料 ›› 2016, Vol. 0 ›› Issue (11): 15-19.

双轴向经编和三维正交机织增强复合材料拉伸性能实验研究

马亚运, 陶楠楠, 高晓平^*

内蒙古工业大学轻工与纺织学院,呼和浩特010080

收稿日期:2016-07-08 出版日期:2016-11-30 发布日期:2016-11-30
通讯作者: 高晓平(1978-),男,博士,教授,主要从事纺织结构复合材料力学性能方面的研究,gaoxp@imut.edu.cn。
作者简介:马亚运(1990-),男,硕士研究生,主要从事复合材料力学性能方面的研究。
基金资助:
国家自然科学基金(11462016);内蒙古自治区研究生科研创新项目(S20141012710)

EXPERIMENTAL INVESTIGATION ON TENSILE BEHAVIOR OF BIAXIAL WARP-KNITTED AND 3D ORTHOGONAL WOVEN COMPOSITE MATERIAL

MA Ya-yun, TAO Nan-nan, GAO Xiao-ping^*

College of Light Industry and Textile, Inner Mongolia University of Technology, Hohhot 010080, China

Received:2016-07-08 Online:2016-11-30 Published:2016-11-30

摘要/Abstract

摘要： 为对比双轴向经编和三维正交机织玻纤复合材料沿0°和90°方向拉伸性能,分别以0°/90°双轴向经编织物和三维正交机织物为增强体,E-2511-1A环氧树脂/2511-1BT固化剂为基体,通过VARTM成型,测试试样沿0°和90°拉伸性能。结果表明,该双轴向经编复合材料仅在0°方向拉伸强度和当量强度略高,弹性模量和当量模量均弱于三维正交机织复合材料,这与增强体纱线线密度和织造密度紧密相关。复合材料拉伸断裂截面显示,三维正交机织物内Z纱有效改善了双轴向经编复合材料易拉伸分层失效和断裂截面处纤维抽拔、脱粘等问题。

关键词: 双轴向经编织物, 三维正交机织物, 拉伸性能, 应力-应变

Abstract: For comparing the tensile behavior of biaxial warp-knitted and 3D orthogonal woven composite along to 0° direction and 90° direction, two kinds of composites which were reinforced with 0°/90° biaxial warp-knitted glass fabric, 3D orthogonal woven fabric and the mixture of epoxy(E-2511)and curing (2511-1BT) were manufactured by means of VARTM (vacuum assisted resin transfer molding), respectively. The mechanical behavior of specimens along to 0° direction and 90° direction were experimentally executed. The result shows that the tensile strength and specific strength of biaxial warp-knitted composite along to 0° direction were a little higher than those of the 3D orthogonal woven composite. However, the elastic modulus and specific modulus were weaker than those of the 3D orthogonal woven composite. These were closely related with the effect of yarn count and weaving density of the reinforcement in composite. The tensile fracture morphologies of composites show that the tensile laminates failure, yarn pull-out and debonding of fibers in cross section of 3D orthogonal woven composite material have been significantly improved compared with the biaxial warp-knitted composite since the role of Z yarn.

Key words: biaxial warp-knitted fabric, 3D orthogonal woven fabric, tensile behavior, stress-strain

中图分类号:

TB332

马亚运, 陶楠楠, 高晓平. 双轴向经编和三维正交机织增强复合材料拉伸性能实验研究[J]. 玻璃钢/复合材料, 2016, 0(11): 15-19.

MA Ya-yun, TAO Nan-nan, GAO Xiao-ping. EXPERIMENTAL INVESTIGATION ON TENSILE BEHAVIOR OF BIAXIAL WARP-KNITTED AND 3D ORTHOGONAL WOVEN COMPOSITE MATERIAL[J]. Fiber Reinforced Plastics/Composites, 2016, 0(11): 15-19.

参考文献

[1] 马立敏, 张嘉振, 岳广全, 等. 复合材料在新一代大型民用飞机中的应用[J]. 复合材料学报, 2015, 32(02): 317-322.
[2] 钟文鑫, 马丕波. 风电叶片用多轴向经编织物发展现状[J]. 玻璃纤维, 2015(06): 35-39.
[3] 何亚飞, 矫维成, 杨帆, 等. 树脂基复合材料成型工艺的发展[J]. 纤维复合材料, 2011(02): 7-13.
[4] 赵兆, 陈南梁, 刘黎民, 等. 玻纤捆绑纱双轴向经编碳纤维增强复合材料拉伸性能的研究[J]. 玻璃钢/复合材料, 2012(05): 42-46.
[5] 苏丹, 缪旭红. 多轴向经编增强材料的拉伸性能[J]. 纺织学报, 2011,32(10): 61-65.
[6] Tan P, Tong LY, Steven GP, et al. Behavior of 3D orthogonal woven CFRP composites. Part I. Experimental investigation[J]. Composites Part A: Applied Science and Manufacturing, 2000, 31(03): 259-271.
[7] 汪金花, 方芳, 杨格, 等. 三维正交机织复合材料低周弯曲疲劳力学性能有限元模拟[J]. 复合材料学报,2014, 31(03): 797-802.
[8] Yu B, Bradley RS, Soutis C, et al. 2D and 3D imaging of fatigue failure mechanisms of 3D woven composites[J]. Composites Part A: Applied Science and Manufacturing, 2015,77: 37-49.
[9] 张涛涛, 燕瑛, 刘波, 等. T700轴向增强经编织物复合材料力学性能的模拟分析与试验研究[J]. 复合材料学报, 2013, 30(05): 236-243.
[10] 李春燕. 混杂针织结构复合材料T字梁准静态弯曲性能和有限元模拟[D]. 上海: 东华大学, 2009.
[11] 姬长干. 三维正交机织复合材料点冲击响应和有限元计算[D]. 上海: 东华大学, 2008.
[12] Topal S, Baiocchi L, Crocombe AD, et al. Late-stage fatigue damage in a 3D orthogonal non-crimp woven composite: An experimental and numerical study[J]. Composites Part A: Applied Science and Manufacturing, 2015,79:155-163.
[13] 杨格, 潘忠祥. 三维角联锁机织复合材料三点弯曲疲劳的细观结构效应[J]. 玻璃钢/复合材料, 2014(03):13-17.
[14] 张发, 万玉敏. 多轴向经编织物增强复合材料有限元建模[J]. 针织工业, 2014(04): 23-26.
[15] Cuong HM, Abdelatif Imad, Franois B, et al. Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact[J]. International Journal of Impact Engineering, 2016, 88: 91-101.