功能梯度经典梁损伤识别模态应变能变化率法的抗噪音性能研究

玻璃钢/复合材料 ›› 2016, Vol. 0 ›› Issue (2): 35-39.

功能梯度经典梁损伤识别模态应变能变化率法的抗噪音性能研究

黄立新^{1, 2}, 岳世燕¹, 胡中明¹, 杨真真³

1.广西大学土木建筑工程学院,南宁530004;
2.广西大学工程防灾与结构安全教育部重点实验室,南宁530004;
3.许昌学院土木工程学院,许昌461000

收稿日期:2015-10-08 出版日期:2016-02-20 发布日期:2016-02-20
作者简介:黄立新(1964-),男,博士,教授,博士生导师,主要从事复合材料结构与力学等方面的研究。
基金资助:
国家自然科学基金(11262002)

A STUDY OF ANTI-NOISE PROPERTIES OF MODAL STRAIN ENERGY CHANGE RATIO METHODFOR THE DAMAGE IDENTIFICATION OF FUNCTIONALLY GRADED CLASSICAL BEAM

HUANG Li-xin^1,2, YUE Shi-yan¹, HU Zhong-ming¹, YANG Zhen-zhen³

1.School of Civil Engineering, Guangxi University, Nanning 530004, China
2.The Key Laboratory of Disaster Prevention and Structural Safety of the Education Ministry,Guangxi University, Nanning 530004, China
3.School of Civil Engineering, Xuchang University, Xuchang 461000, China

Received:2015-10-08 Online:2016-02-20 Published:2016-02-20

摘要/Abstract

摘要： 针对功能梯度经典梁,研究损伤识别的模态应变能变化率方法的抗噪音性能。基于有限元商用软件ABAQUS计算平台,计算功能梯度经典梁自由振动模态参数,并加入一定水平的噪音。用这些含噪音的模态参数仿真实际测量值。模态参数测量噪音模型采用高斯分布模型,并比较了计算噪音水平的三种计算方法。通过数值算例,分析测量噪音对功能梯度经典梁损伤识别的影响。从损伤识别结果可以发现,在1%、2%和5%的噪音水平情况下,均能很好地识别出梁的损伤单元。这表明功能梯度经典梁损伤识别的模态应变能变化率方法具有良好的抗噪音性能。

关键词: 功能梯度经典梁, 模态应变能变化率, 损伤识别, 抗噪音性能

Abstract: The anti-noise property of modal strain energy change ratio method is studied for the functionally graded classical beam. Based on the computing platform of the finite element method, commercial software ABAQUS, modal parameters are computed for the free vibration of functionally graded classical beam. Those modal parameters are directly added by Gauss noises with a certain level in order to simulate the measured modal parameters. Three methods are compared for the computation of noise levels. Numerical examples are given to analyze the noise effect on the damage identification results. Numerical results reveal that the damaged element can be successfully identified with 1%, 2% or 5% measurement noise. It means that the modal strain energy change ratio method has very good anti-noise property for identifying damage in the functionally graded classical beam.

Key words: functionally graded classical beam, modal strain energy change ratio, damage identification, anti-noise property

中图分类号:

TB332

黄立新, 岳世燕, 胡中明, 杨真真. 功能梯度经典梁损伤识别模态应变能变化率法的抗噪音性能研究[J]. 玻璃钢/复合材料, 2016, 0(2): 35-39.

HUANG Li-xin, YUE Shi-yan, HU Zhong-ming, YANG Zhen-zhen. A STUDY OF ANTI-NOISE PROPERTIES OF MODAL STRAIN ENERGY CHANGE RATIO METHODFOR THE DAMAGE IDENTIFICATION OF FUNCTIONALLY GRADED CLASSICAL BEAM[J]. Fiber Reinforced Plastics/Composites, 2016, 0(2): 35-39.

参考文献

[1] Birman V, Byrd LW. Modeling and Analysis of Functionally Graded Materials and Structures[J]. Applied Mechanics Reviews, 2007, 60: 195-216.
[2] Jha DK, Tarun Kant, Singh RK. A critical review of recent research on functionally graded plates[J]. Composite Structures, 2013, 96: 833-849.
[3] Liew KM, Lei ZX, Zhang LW. Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review[J]. Composite Structures, 2015, 120: 90-97.
[4] 曹志远. 功能梯度复合材料圆柱壳基本理论及长壳固有振动解[J]. 玻璃钢/复合材料, 2006, 189(4): 3-6.
[5] 曹志远. 功能梯度壳体力学的一般理论[J]. 玻璃钢/复合材料, 2008, 199(2): 7-11.
[6] 仲政, 吴林志, 陈伟球. 功能梯度材料与结构的若干力学问题研究进展[J]. 力学进展, 2010, 40(5): 528-540.
[7] 黄立新, 姚祺, 张晓磊, 等. 基于分层法的功能梯度材料有限元分析[J]. 玻璃钢/复合材料, 2013, 230(2): 43-48.
[8] 黄立新, 杨真真, 张晓磊, 等. 基于ABAQUS 的功能梯度材料等参梯度有限元分析[J]. 玻璃钢/复合材料, 2014, 239(2): 33-39.
[9] Cornwell PJ, Doebling SW, Farrar CR. Application of the strain energy damage detection method to plate-like structures[J]. Journal of Sound and Vibration, 1999, 224 (2): 359-374.
[10] Shi ZY, Law SS, Zhang LM. Structural damage localization from modal strain energy change[J]. Journal of Sound and Vibration, 1998, 218 (5): 825-844.
[11] Shi ZY, Law SS, Zhang LM. Structural damage detection from modal strain energy change[J]. Journal of Engineering Mechanics, 2000, 126(12): 1216-1223.
[12] Li YY. Hyper sensitivity of strain-based indicators for structural damage identification: A review[J]. Mechanical Systems and Signal Processing, 2010, 24: 653-664.
[13] Alvandia A, Cremona C. Assessment of vibration-based damage identification techniques[J]. Journal of Sound and Vibration, 2006, 292: 179-202.
[14] 黄立新, 杨真真, 赵文举. 基于模态应变能变化率法的Euler-Bernoulli功能梯度梁的损伤识别[J]. 玻璃钢/复合材料, 2015, 258(8): 14-17.
[15] 杨真真. Euler-Bernoulli功能梯度梁结构损伤识别的模态应变能法[D]. 南宁: 广西大学硕士学位论文, 2014.
[16] Alshorbagy AE, Eltaher MA, Mahmoud FF. Free vibration characteristics of a functionally graded beam by finite element method[J]. Applied Mathematical Modelling, 2011, 35: 412-425.
[17] 范大茵, 陈永华. 概率论与数理统计[M]. 杭州: 浙江大学出版社, 2003.
[18] D′Cruz J, Crisp JDC, Ryall TG. On the identification of a harmonic force on a viscoelastic plate from response data[J]. Journal of Applied Mechanics, 1992, 59: 722-729.
[19] Han X, Liu GR, Lam KY, et al. A quadratic layer element for analyzing stress waves in FGMs and its application in material characterization[J]. Journal of Sound and Vibration, 2000, 236(2): 307-321.