舰艇复合材料结构可靠性设计方法探究

玻璃钢/复合材料 ›› 2016, Vol. 0 ›› Issue (6): 33-36.

舰艇复合材料结构可靠性设计方法探究

孙巍¹,陈国涛^2*,梅志远²,刘令²

1.海军驻上海沪东中华造船集团有限公司军事代表处,上海200129;
2.海军工程大学舰船工程系,武汉430033

收稿日期:2016-01-13 出版日期:2016-06-28 发布日期:2016-06-28
通讯作者: 陈国涛(1990-),男,硕士,研究方向为舰船复合材料结构应用工程,1181590188@qq.com。
作者简介:孙巍(1973-),男,工程师,硕士,主要从事舰船设计与建造、船用材料研究方面的工作。
基金资助:
国家自然科学基金面上项目资助(51479205)

PREMILINARY EXPLORATION ON REALIABILITY DESIGN METHOD OFCOMPOSITE STRUCTURE IN WARSHIP

SUN Wei¹, CHEN Guo-tao^2*, MEI Zhi-yuan², LIU Ling²

1.Naval Military Representative at Hudong-Zhonghua Ship-building Group Co., Ltd., Shanghai 200129, China;
2.Naval University of Engineering, Ship Engineering, WuHan 430033, China

Received:2016-01-13 Online:2016-06-28 Published:2016-06-28

摘要/Abstract

摘要： 可靠度是衡量结构物固有可靠性水平的重要指标之一,正确选取可靠性分析方法以及可靠度计算方法是开展舰艇用复合材料结构可靠性设计工作的基础和保障。舰艇用复合材料结构工作环境复杂,加之复合材料本身具有非均匀、各向异性等性质,力学性能比传统金属材料复杂得多,离散度也大,导致结构可靠性设计问题相对突出。对此,分析了舰艇用复合材料结构强度特性及其分布规律,提出基于应力-强度干涉模型进行舰用复合材料结构可靠性分析,采用B基准设计许用值的安全系数法开展可靠度计算的可靠性设计技术途径。二者联立,在求解问题能力及结果准确性等方面具有明显的可操作性和优越性,对开展舰艇用复合材料结构可靠性设计具有重要的参考意义。

关键词: 可靠度, 舰用复合材料, 结构可靠性设计, 应力-强度干涉模型, B基准设计许用值的全系数法

Abstract: Reliability is one of the important indexes to measure the inherent reliability of structures. The right selection of reliability analysis and calculation method is the basis and guarantee for the reliability assessment of composite structures in warship. Working environment of composite structures for naval ships is complicated, and the discrete characteristics of its structural mechanics performance is higher than that of the traditional metal structure and the problem of structural reliability is relatively serious because of the limitations of the designing technology and the production capability. For this reason, firstly, the paper analyzes structural strength properties and its regularities of distribution of composite structures for naval vessels. Then,we pesent the method of analyzing reliability of composite structures based on stress-intensity interference model and working out reliability by safety factor method for the design of allowable values of the reference design. In the two parts, it has obvious advantages and operability in solving problems and result accuracy, which has important reference value for the development of structural fatigue reliability assessment of naval vessels.

Key words: reliability, composite structures in warship, reliability design of structure, stress-intensity interference model, safety factor method of allowable value of B reference design

中图分类号:

TB332

孙巍,陈国涛,梅志远,刘令. 舰艇复合材料结构可靠性设计方法探究[J]. 玻璃钢/复合材料, 2016, 0(6): 33-36.

SUN Wei, CHEN Guo-tao, MEI Zhi-yuan, LIU Ling. PREMILINARY EXPLORATION ON REALIABILITY DESIGN METHOD OFCOMPOSITE STRUCTURE IN WARSHIP[J]. Fiber Reinforced Plastics/Composites, 2016, 0(6): 33-36.

参考文献

[1] 陈春露, 刘文博. 复合材料层合板分层疲劳性能研究进展[J]. 玻璃钢/复合材料, 2012(01).
[2] 沈真, 张晓晶. 复合材料飞机结构强度设计与验证概论[M]. 上海: 上海交通大学出版社, 2011(12): 1-11.
[3] 宋保维. 水下航行器现代设计理论与方法-可靠性与优化设计[M]. 西安: 西北工业大学出版社, 2004(11): 1-6.
[4] 徐孝诚. 复合材料结构强度散布特性及可靠性问题的讨论[J]. 强度与环境, 1991(03): 25-29.
[5] Wang C H, Miller K J. Short fatigue crack growth under mean stress, uniaxial loading[J]. Fatigue and Fracture of Materials and Structures, 1993, 16(2): 181-198.
[6] Du Quesnay D L, Topper T H, Ye M T. The effect of notch radius on the fatigue notch factor and the propagation of short cracks[C]. In; Miller K J, Delos Rios E R Ed. The behavior of Short Fatigue Cracks. London: M.E.P, 1986: 323-335.
[7] Miller K J. The behavior of short fatigue cracks and their initiation Part Ⅰ-A review of two recent books[J]. Fatigue and Fracture of Materials and Structures, 1993, 16(2): 181-198.
[8] Seneviratne W. fatigue-Life Determination of Damage-Tolerant Composite airframe [R].Wichita State University, 2008.
[9] 王金武, 张兆国. 可靠性工程基础[M].北京: 科学出版社, 2013(8): 2-4,143-200.
[10] 李静. 基于BAYES方法的固体火箭发动机可靠性评估[D]. 长沙: 国防科学技术大学, 2008(11): 1-3.
[11] 刘文珽. 结构可靠性设计手册[M]. 北京: 国防工业出版社, 2008: 143-200.
[12] 芮延年, 傅戈雁. 现代可靠性设计[M]. 北京: 国防工业出版社, 2007(4): 73-75. 99-100.
[13] 芮强, 王红岩. 结构可靠性设计[M]. 北京: 国防工业出版社, 2014(6): 65-68.
[14] 林杰威. 航空发动机叶片疲劳寿命和可靠性研究[D]. 天津: 天津大学,2009(5): 58-62.
[15] 沈真, 张晓晶. 复合材料飞机结构强度设计与验证概论[M]. 上海: 上海交通大学出版社, 2011: 1-11.
[16] MIL HDBK-17-1F.Composite Materials Handbook Volume 1.Polymer Matrix Composite Materials System for Characterization of Structural Materials[M]. West Conshohocken, Pa. 2002.
[17] DOT/FAA/AR-03/19.Material Qualification and Equivalency for Polymer Matrix Composite Materials Systems: Updated Procedure[G]. 2003.
[18] 张子龙. 复合材料性能表征与A/B基准值[C].第十五届全国学术会议论文集(下册), 2008(07).
[19] 张德文, 王龙生. 介质取代(修改结构)动力特性的快速分析法[J]. 宇航学报,1987(2): 12-19.
[20] 陈国涛, 梅志远. SW220/430LV复合材料拉-拉疲劳强度材料许用值试验研究[J]. 玻璃钢/复合材料, 2015(9): 11-15.