双罗纹衬纬纬编针织物增强复合材料的拉伸性能

玻璃钢/复合材料 ›› 2016, Vol. 0 ›› Issue (8): 78-81.

双罗纹衬纬纬编针织物增强复合材料的拉伸性能

马晓红, 秦志刚^*

河北科技大学纺织服装学院,石家庄050018

收稿日期:2016-07-11 出版日期:2016-08-28 发布日期:2016-08-28
通讯作者: 秦志刚(1962-),男,博士,教授,主要从事纺织结构复合材料方面的研究,zhigang_qin@126.com。
作者简介:马晓红(1964-),女,硕士,副教授,主要从事纺织品设计与加工方面的研究。
基金资助:
河北科技大学平台开放基金(2014PT03)

TENSILE PROPERTIES OF THE INTERLOCK LAYING-IN WEFT KNITTED FABRIC REINFORCED COMPOSITES

MA Xiao-hong, QIN Zhi-gang^*

College of Textile and Garment, Hebei University of Science and Technology, Shijiazhuang 050018, China

Received:2016-07-11 Online:2016-08-28 Published:2016-08-28

摘要/Abstract

摘要： 在电脑横机上使用玻璃纤维编织了三种双罗纹衬纬纬编针织物,以玻璃纤维针织物作为增强体,采用手糊工艺与环氧树脂复合制备了复合材料板材,在万能强力机上测试了复合材料试样的拉伸性能。结果表明,双罗纹衬纬纬编针织物增强复合材料在横向拉伸时的应力应变曲线呈现近似线性,纵向拉伸具有明显的屈服现象,横向拉伸断裂强度和模量最高,斜向次之,纵向最低;拉伸应变沿横列方向最小,拉伸性能各向异性明显;复合材料拉伸性能与增强织物结构、密度和纤维体积分数有关。

关键词: 纬编针织物, 衬纬, 复合材料, 拉伸强度, 拉伸模量

Abstract: The three interlock laying-in weft knitted fabrics are knitted on a computerized flat knitting machine with glass continuous-filament yarns. The glass fiber knitted fabrics are used as reinforcement, the laminates of knitted fabrics/epoxy resin composites were prepared by manual molding technology. The tensile properties of the composite specimens are tested in universal testing machine. The results show that the tensile stress-strain curves of composites appear approximately linear. The tensile curves in the wale direction have obvious yield phenomenon. The tensile strength and modulus in the course direction are the highest, these in the diagonal direction are the second, the lowest in the wale direction. The strain along the course direction is the smallest. The tensile properties of composites possess obvious orthotropic characteristics. The tensile properties of the composite are related to the stitch and density of fabrics, and fiber volume fraction.

Key words: weft knitted fabrics, laying-in, composites, tensile strength, tensile modulus

中图分类号:

TB332

马晓红, 秦志刚. 双罗纹衬纬纬编针织物增强复合材料的拉伸性能[J]. 玻璃钢/复合材料, 2016, 0(8): 78-81.

MA Xiao-hong, QIN Zhi-gang. TENSILE PROPERTIES OF THE INTERLOCK LAYING-IN WEFT KNITTED FABRIC REINFORCED COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2016, 0(8): 78-81.

参考文献

[1] Rudd C D, Owen M J, Middleton V. Mechanical properties of weft knit glass fibre/polyester laminates[J]. Composites Science and Technology, 1990, 39 (3): 261-277.
[2] Leong K H, Ramakrishna S, Huang Z M, et al. The potential of knitting for engineering composites: a review[J]. Composites Part A: Applied Science and Manufacturing, 2000, 31 (3): 197-220.
[3] 秦志刚. 经编针织物增强复合材料结构与性能研究[D]. 上海: 东华大学, 2011:1-2, 10-12.
[4] Long Hairu. Tensile Properties of Weft Knitted Fabric Reinforced Composites[J]. Shanghai: Journal of Donghua University, 2001(01): 97.
[5] 李翠玉, 贾静艳, 罗岳文, 等. UHMWPE纤维纬编针织复合材料的制备工艺研究[J]. 材料导报, 2015(11): 67-71.
[6] 魏凯, 秦志刚. 纬编针织复合材料拉伸性能研究. 上海纺织科技, 2015(9):44-47.
[7] 戴青春.纬编针织结构增强复合材料的制造及其力学性能研究[D]. 上海:东华大学, 2006:1-7.
[8] 李翠玉, 罗岳文, 贾静艳, 等. 不同结构UHMWPE纤维纬编针织复合材料弯曲性能[J]. 材料工程, 2015, 43(11): 84-90.
[9] 吴波伟, 张毅. 纬编针织增强材料的结构特性及应用[J].针织工业, 2016(1): 12-15.
[10] 龙海如. 纬编针织物增强复合材料力学性能研究[D]. 上海: 东华大学, 2002: 1-4, 33-35.
[11] 方芳, 潘忠祥. 双轴向经编针织复合材料的冲击压缩性能[J]. 玻璃钢/复合材料, 2014(10): 62-65.
[12] 赵兆, 陈南梁, 刘黎民, 等. 玻纤捆绑纱双轴向经编碳纤维增强复合材料拉伸性能的研究[J]. 玻璃钢/复合材料, 2012(5): 42-46.
[13] 王文燕, 姜亚明, 刘良森. 纬编双轴向多层衬纱织物增强复合材料的弯曲性能研究[J]. 玻璃钢/复合材料, 2009(1): 51-53.
[14] 纤维增强塑料密度和相对密度试验方法: GB/T 1463—2005[S].
[15] 纤维增强塑料拉伸性能试验方法: GB/T1447—2005[S].