两种玻璃纤维增强复合材料体系的湿热老化研究

玻璃钢/复合材料 ›› 2017, Vol. 0 ›› Issue (10): 79-84.

两种玻璃纤维增强复合材料体系的湿热老化研究

袁应立,王继辉^*

武汉理工大学材料科学与工程学院,武汉430070

收稿日期:2017-02-03 出版日期:2017-10-20 发布日期:2017-10-20
通讯作者: 王继辉(1962-),男,博士,教授,主要从事聚合物基复合材料力学方面的研究,jhwang@whut.edu.cn。
作者简介:袁应立(1989-),男,硕士,主要从事聚合物基复合材料方面的研究。

STUDY ON HYDROTHERMAL AGING OF TWO KINDS OFGLASS FIBER REINFORCED COMPOSITE

YUAN Ying-li, WANG Ji-hui^*

College of Material Science and Engineering, Wuhan University of Technology, Wuhan 430070, China

Received:2017-02-03 Online:2017-10-20 Published:2017-10-20

摘要/Abstract

摘要： 玻璃纤维增强复合材料在湿热环境下性能的退化是工程研究中待解决的问题,而实验室人工加速老化则是较好地研究该问题的常用方法。通过人工加速老化方法,结合露天储水环境,研究两种玻璃纤维增强复合材料在35 ℃水浸泡、65 ℃水浸泡及盐雾三种环境下的吸水率、巴氏硬度和弯曲强度的变化,并运用两种模型预测材料的使用寿命。研究表明:不同湿热环境下,材料的巴氏硬度前期变化明显,后期趋向稳定;吸水率基本符合Fick定律;温度对弯曲强度保留率影响显著,盐雾影响次之;中值老化公式比经验公式拟合度高7.6%。

关键词: 玻璃纤维, 复合材料, 湿态环境, 寿命预测

Abstract: The degradation of glass fiber reinforced composite materials (GFRP) in hydrothermal environment is a problem to be solved in the engineering research. Artificial accelerated aging method is a good and common way to study hydrothermal aging. In this paper, two different systems of glass fiber/resin were investigated by artificial accelerated aging method combined with open water storage environment, which reinforced composite materials in the environment of 35 ℃ water immersion, 65 ℃ water immersion and salt spray. The properties of mechanical, water absorption, hardness, bending strength were investigated and the service life were predicted by two models. The study shows that the hardness of the material changes obviously in the early period, and tends to be stable in the later stage. The water absorption rate almost fit the Fick law. The temperature has a significant effect on the retention rate of the flexural strength, and the salt spray is the second factor. The median aging formula has a higher fitting degree than the empirical formula, which even exceed by 7.6%.

Key words: glass fiber, composite, wet environment, life prediction

中图分类号:

TB332

袁应立,王继辉. 两种玻璃纤维增强复合材料体系的湿热老化研究[J]. 玻璃钢/复合材料, 2017, 0(10): 79-84.

YUAN Ying-li, WANG Ji-hui. STUDY ON HYDROTHERMAL AGING OF TWO KINDS OFGLASS FIBER REINFORCED COMPOSITE[J]. Fiber Reinforced Plastics/Composites, 2017, 0(10): 79-84.

参考文献

[1] Sousa J M, Correia J R, Cabral-Fonseca S. Durability of Glass Fibre Reinforced Polymer Pultruded Profiles: Comparison Between QUV Accelerated Exposure and Natural Weathering in a Mediterranean Climate[J]. Experimental Techniques, 2016, 40(1): 207-219.
[2] Xian G, Li H, Su X. Water absorption and hygrothermal ageing of ultraviolet cured glass-fiber reinforced acrylate composites[J]. Polymer Composites, 2012, 33(7): 1120-1128.
[3] Mourad A H I, Abdel-Magid B M, El-Maaddawy T, et al. Effect of Seawater and Warm Environment on Glass/Epoxy and Glass/Polyurethane Composites[J]. Applied Composite Materials, 2010, 17(5): 557-573.
[4] Kaushal S, Tankala K, Rao R M V G K, et al. Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface[J]. Journal of Materials Science, 1991, 26(23): 6293-6299.
[5] Cabral-Fonseca S, Correia J R, Rodrigues M P, et al. Artificial Accelerated Ageing of GFRP Pultruded Profiles Made of Polyester and Vinylester Resins: Characterisation of Physical-Chemical and Mechanical Damage[J]. Strain, 2012, 48(2): 162-173.
[6] Jiang B K, Xu J, Li Y H. Flapwise vibration analysis of a rotating composite beam under hygrothermal environment[J]. Composite Structures, 2014, 117(1): 201-211.
[7] Yang Z, Xian G, Hui L. Effects of alternating temperatures and humidity on the moisture absorption and mechanical properties of ramie fiber reinforced phenolic plates[J]. Polymer Composites, 2014, 36(9): 1590-1596.
[8] Mahato K K, Dutta K, Ray B C. High-temperature tensile behavior at different crosshead speeds during loading of glass fiber-reinforced polymer composites[J]. Journal of Applied Polymer Science, 2017, 23(7): 1204-1224.
[9] Miyano Y, Nakada M, Sekine N. Accelerated testing for long-term durability of FRP laminates for marine use[J]. Journal of composite materials, 2005, 39(1): 5-20.
[10] 吕海宝. 玻璃钢在海洋环境下的腐蚀机制和性能演变规律[D]. 哈尔滨: 哈尔滨工业大学, 2006.
[11] 王冰, 李玲. 聚合物基复合材料吸湿性能研究进展[J]. 中国塑料, 2013,15(2): 14-18.
[12] 张汝光. 湿态环境下聚合物基复合材料的吸水:Ⅰ.现象和机理[J]. 纤维复合材料, 2000, 15(3): 39-48.
[13] 张汝光. 湿态环境下聚合物基复合材料的吸水 Ⅱ. 理论和实验[J]. 玻璃钢, 2000, 23(4): 41-46.
[14] 王俊, 刘伟庆, 赵慧敏, 等. 载荷与氯离子耦合作用下玻璃纤维增强不饱和聚酯复合材料吸湿性能[J]. 复合材料学报, 2014, 31(5): 1173-1178.
[15] 闫凯, 宋庆军, 李秀娟,等. 盐雾腐蚀及其试验中需要注意的几个问题分析[J]. 环境技术, 2013, 23(4): 18-20.
[16] 叶宏军, 古, ГМ. T300/4211复合材料的使用寿命评估[J]. 材料工程, 1995, 16(10): 3-5.
[17] 宋文娟. 玻纤增强环氧树脂复合材料耐海水腐蚀行为与寿命预测[D]. 哈尔滨: 哈尔滨工业大学, 2014.