EPP泡沫填充对铝蜂窝压缩性能的影响研究

玻璃钢/复合材料 ›› 2017, Vol. 0 ›› Issue (3): 49-52.

EPP泡沫填充对铝蜂窝压缩性能的影响研究

刘强^{1, 2}, 陈航¹

1.中山大学工学院,广州510006;
2.湖南大学机械学院,长沙410082

收稿日期:2016-10-26 出版日期:2017-03-25 发布日期:2017-03-28
作者简介:刘强(1981-),男,博士,副教授,主要从事轻量化复合材料汽车结构开发方面的研究,Liu5168198110@126.com。
基金资助:
国家自然科学基金(51675540);博士后科学基金(2015M582323);湖南省自然科学基金(2016JJ3039)

EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO THE COMPRESSION CHARACTERISTICS OF ALUMINUM HONEYCOMB PANEL FILLED WITH EPP

LIU Qiang^1,2, CHEN Hang¹

1.School of Engineering, Sun Yat-sen University, Guangzhou 510006, China;
2.School of Mechanical Engineering, Hunan University, Changsha 410082, China

Received:2016-10-26 Online:2017-03-25 Published:2017-03-28

摘要/Abstract

摘要： 采用准静态轴向压缩实验和有限元仿真相结合的方法,对EPP泡沫(聚丙烯塑料发泡材料)填充对铝蜂窝结构压缩性能的影响开展了研究。实验发现,相对空铝蜂窝,EPP泡沫填充铝蜂窝结构的峰值力、平均抗压强度和吸收能量分别提高了1.9%~43.33%、46.59%~179.53%和46.26%~179.04%。并且相对空铝蜂窝与单独EPP泡沫之和,泡沫填充结构的平均抗压强度和总吸能分别提高了2%~23.5%和3.9%~23.3%。此外,采用Ls-dyna软件对EPP泡沫填充铝蜂窝的破坏过程进行了仿真,发现EPP泡沫填充可以有效抵抗蜂窝壁变形,并且获得了与实验较吻合的破坏过程和位移曲线。研究表明,利用EPP泡沫填充铝蜂窝,能有效改善铝蜂窝结构的轴向压缩性能。

关键词: 轻量化, 铝蜂窝, EPP泡沫, Ls-dyna, 压缩性能

Abstract: The paper investigates the compression characteristics and failure process of aluminum honeycomb panel filled with EPP foam (Expanded polypropylene) by experiments and numerical simulations. The test results show that the peak load, mean crushing strength and absorbed energy of the filled aluminum honeycomb panel increased by 1.9%~43.33%, 46.59%~179.53% and 46.26%~179.04%, respectively, compared to the bare aluminum honeycomb panel. By comparing to the sum of bare panel and bare EPP foam, the mean crushing strength and absorbed energy of EPP foam filled aluminum honeycomb panel are increased by 2%~23.5% and 3.9%~23.3%. In addition, the numerical results using the Ls-dyna software show the predicted failure mode and load-displacement curves agree well with the exprimental results, indicating that the EPP foam filling could resist the deformation of the honeycomb wall. This study indicates that aluminum honeycomb panel filled with EPP foam structure could effectively improve axial compression properties of bare aluminum honeycomb structure.

Key words: lightweight, aluminum honeycomb, EPP foam, Ls-dyna, compression characteristics

中图分类号:

TB332

刘强, 陈航. EPP泡沫填充对铝蜂窝压缩性能的影响研究[J]. 玻璃钢/复合材料, 2017, 0(3): 49-52.

LIU Qiang, CHEN Hang. EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO THE COMPRESSION CHARACTERISTICS OF ALUMINUM HONEYCOMB PANEL FILLED WITH EPP[J]. Fiber Reinforced Plastics/Composites, 2017, 0(3): 49-52.

参考文献

[1] 周助林, 妒忌予, 区延杰, 等. 石材铝蜂窝复合板导热系数试验研究分析[J]. 玻璃钢/复合材料, 2011(07): 14-16.
[2] 刘荣, 刘泓并, 贾旭鹏. 同步带成形半蜂窝薄铝板的机理及设备研究[J]. 机械设计与制造, 2007(1): 85-87.
[3] 李萌, 刘荣强, 罗昌杰, 等. 铝蜂窝串联缓冲结构静态压缩仿真与试验研究[J]. 振动与冲击, 2013, 9(32): 50-56.
[4] 蔡茂, 高群, 宗志坚. 铝合金蜂窝结构轴向压缩吸能特性[J]. 材料科学与工程学报, 2015, 33(05): 675-679.
[5] 周助林, 张长明. 运载火箭复合材料仪器舱力学分析[J]. 玻璃钢/复合材料, 2002(11):12-14.
[6] 张勇, 谢卫红, 陈力, 等. 填充聚氨酯泡沫蜂窝纸板缓冲性能实验[J]. 解放军理工大学学报(自然科学版), 2014, 15(02): 140-144.
[7] 甄建伟, 安振涛, 陈玉成, 等. 蜂窝增强泡沫塑料的静动态力学性能[J]. 复合材料学报, 2011, 28(03): 224-228.
[8] Liu Q, Mo Z W, Wu Y H, et al. Crush response of CFRP square tube filled with aluminum honeycomb[J]. Composites Part B, 2016(98): 406-414.
[9] Z.Ahmad, D.P. Thambiratnam. Crushing response of foam-filled conical tubes under quasi-static axial loading[J]. Materials and Design, 2009(30): 2393-2403.
[10] A.Alavi Nia, M.Z.Sadeghi. The effects of foam filling on compressive response of hexagonal cell aluminum honeycombs under axial loading-experimental study[J]. Materials and Design, 2010(31): 1216-1230.
[11] Han B, Qin K K, Yu B, et al. Honeycomb-corrugation hybrid as a novel sandwich core for significantly enhanced compressive performance[J]. Materials and Design, 2016(93): 271-282.
[12] 李文光, 吴炳田, 王亚, 等. 中国EPP材料产业化发展前景展望[J]. 高分子通报, 2010(014): 106-110.
[13] Liu Q, Lin Y Z, Zong Z J, et al. Lightweight design of carbon twill weave fabric composite body structure for electric vehicle[J]. Composite Structures, 2013(97): 231-238.
[14] Liu Q, Xing H L, Ju Y, et al. Quasi-static axial crushing and transverse bending of double hat shaped CFRP tubes[J]. Composite Structures, 2014(117): 1-11.
[15] Papka.S, Kyriakides S. In-plane compressive and crushing of honeycombs[J]. Mech Phys Solids, 1994(42): 1499-1532.