非热压罐预浸料制备及成型工艺研究

玻璃钢/复合材料 ›› 2017, Vol. 0 ›› Issue (3): 90-95.

非热压罐预浸料制备及成型工艺研究

陈帅金, 徐辰, 吴国庆, 李国明

江苏恒神股份有限公司,丹阳212310

收稿日期:2016-10-14 出版日期:2017-03-25 发布日期:2017-03-28
作者简介:陈帅金(1973-),女,博士,主要从事热固性/热塑性复合材料等方面的研究,shuai.carreyette@hscarbonfibre.co.uk。

STUDY ON THE PREPARATION AND CURING PROCESS OF OoA PREPREGS

CHEN Shuai-jin, XU Chen, WU Guo-qing, LI Guo-ming

Jiangsu HengShen Co., Ltd., Danyang 212310, China

Received:2016-10-14 Online:2017-03-25 Published:2017-03-28

摘要/Abstract

摘要： 采用单面胶膜浸渍的方法制备非热压罐(Out of Autoclave,以下简称“OoA”)预浸料。采用三种方法测定预浸料的浸渍度,通过预浸料的细观形貌、层压板孔隙率及力学性能,系统地分析了浸渍度对碳纤维增强复合材料(CFRP)质量的影响,22%的浸渍度时性能最优。与OoA预浸料相匹配的固化工艺至关重要,通过无损检测、孔隙率、微观结构及力学性能对比分析,120 ℃/2 h作为第一阶段的固化工艺最适合,同时层压板热性能、力学性能与热压罐相媲美。

关键词: OoA成型, 预浸料浸渍程度, 层压板孔隙率, CFRP, 固化工艺

Abstract: In this study, Out of Autoclave (OoA) prepregs were prepared by single film impregnation process. Prepreg impregnation levels were measured using three methods. Laminate porosity and mechanical properties were tested to compare the prepregs with various impregnation levels. The preferred impregnation level of 22% was identified to offer the best overall performance for the selected prepreg system. Processing parameters for CFRP manufacturing are crucial in OoA process. Laminates with various processing parameters were evaluated using NDT, porosity, microstructure and mechanical properties. A cure cycle of 2 hours at 120 ℃ was selected as the most suitable key process parameters for the selected prepreg system. Overall thermal and mechanical performance comparison was carried out for the laminates manufactured via OoA and autoclave processes. For the selected OoA prepreg system, the thermal and mechanical performance of the laminates via OoA process are equivalent to those via autoclave process.

Key words: OoA, prepreg impregnation levels, laminate porosity, CFRP, curing process

中图分类号:

TB332

陈帅金, 徐辰, 吴国庆, 李国明. 非热压罐预浸料制备及成型工艺研究[J]. 玻璃钢/复合材料, 2017, 0(3): 90-95.

CHEN Shuai-jin, XU Chen, WU Guo-qing, LI Guo-ming. STUDY ON THE PREPARATION AND CURING PROCESS OF OoA PREPREGS[J]. Fiber Reinforced Plastics/Composites, 2017, 0(3): 90-95.

参考文献

[1] G. Gardiner. Out-of-autoclave prepregs: Hype or revolution[J]. High-Performance Composites, 2011(19):32-39.
[2] 王旭. 非热压罐预浸料成型技术的研究与发展[J]. 纤维复合材料, 2009(2):9-12.
[3] M. Brillant. Out-of-Autoclave Manufacturing of Complex Shape Composite Laminates[M]. Montreal, Canada: McGill University, 2011.
[4] 廉伟. 非热压罐工艺在飞机复合材料低成本制造中前景广阔[J]. 国际航空, 2011,23(10):64-66.
[5] Scott L, Steve H, Jim S. Vacuum bag only processing;improving prepreg out-time and Porosity for large composite structure[C]. Society for the Advancement of Material and Process Engineering(SAMPE), Seattle, WA, 2010.
[6] Grunenfelder L, Nutt S R. Void formation in composite prepregs-Effect of dissolved moisture[J]. Composites Science and Technology, 2010, 70(16): 2304-2309.
[7] Mark S, Thomas C, Andrew G. The developmenl of out of autoclave composite prepreg technology for aerospace applications[C]. Society for the Advancement of Material and Process Engineering(SAMPE), Long Beach CA, 2011.
[8] 罗云烽. 航空用热压罐外固化预浸料复合材料的应用[J].航空制造技术,2012(18): 26-30.
[9] 刘亚威. 基于真空袋的预浸料非热压罐制造技术的发展[J]. 国防制造技术, 2013(5): 17-21.
[10] Bryall M L, Kevin H, Goran F. Gas permeability measurements of Out of Autoclave prepreg MTM45-1/CF2426A[C]. Society for the Advancement of Material and Process Engineering(SAMPE), Seattle, WA, 2010.
[11] Steve M, Matthew J S, Elizabeth O. Product development for out of autoclave(OoA) manufacture of aerospace structures[C]. Society for the Advancement of Material and Process Engineering(SAMPE), Seattle, WA, 2010.
[12] Thorfinnson, B, Biermann, TF. Degree of impregnation of prepregs-effect on porosity[C]. 32nd International SAMPE, Symposium,
1987.
[13] Tavares SS, Michaud V, Manson JAE. Through thickness air permeability of prepregs during cure[J]. Composites: Part A, 2009(40):1587-1596.
[14] Thomas S, Nutt SR. In situ estimation of through-thickness resin flow using ultrasound[J]. Compos Sci Technol, 2008(68): 3093-3098.
[15] Tavares SS, Michaud V, Manson JAE. Assessment of semi-impregnated fabrics in honeycomb sandwich structures[J]. Composites: Part A, 2010(41): 8-15.