复合板料摆碾铆接、胶接和混合连接性能研究

玻璃钢/复合材料 ›› 2017, Vol. 0 ›› Issue (4): 54-59.

复合板料摆碾铆接、胶接和混合连接性能研究

黄志超, 冯佳, 张永超

华东交通大学,南昌330013

收稿日期:2016-12-20 出版日期:2017-04-28 发布日期:2017-04-28
作者简介:黄志超(1971-),男,博士,教授,主要从事板料连接方面的研究,hzcosu@163.com。
基金资助:
国家自然科学基金项目(51265012);江西省赣鄱英才555工程领军人才培养计划(赣才字[2012]1号)

CONNECTION PROPERTY OF JOINING COMPOSITE SHEETS WITH ROLLING RIVETING, BONDING AND HYBRID JOINTS

HUANG Zhi-chao, FENG Jia, ZHANG Yong-chao

East China Jiaotong University, Nanchang 330013, China

Received:2016-12-20 Online:2017-04-28 Published:2017-04-28

摘要/Abstract

摘要： 使用摆碾铆接、胶接和摆碾-胶接混合连接技术对玻璃纤维增强树脂基复合材料进行连接,通过拉伸试验检测该连接方式下的静强度。比较了不同连接方式的连接效果,分析了胶接时间、有无垫圈、多铆钉对连接强度的影响。实验表明摆碾-胶接混合连接能够有效提高连接件强度;垫圈对抗拉伸性能影响最大,加垫圈试件承载能力可显著提升29.46%;在一定时间范围内,胶接时间的延长可以大幅度提高连接件的静强度;然而与拉伸方向一致的双铆钉使用不能提升板料拉伸性能。

关键词: 摆碾铆接, 胶接, 混合连接, 拉伸性能

Abstract: The connection quality of glass fiber reinforced resin matrix composites connected by rolling riveting, bonding and hybrid (rolling riveting/bonding) joints was studied by tensile tests. The effects of different connection methods on connection quality were compared. A series of tensile tests were carried out for test pieces obtained from different joint conditions, such as different bonding time, the presence or absence of washer and number of rivets. The experiment results show that the connection performance had been improved significantly by using hybrid joints of glass fiber reinforced resin matrix composites. Furthermore, the washer is the most important influencing factor on the connection property. The bearing capacity of test pieces with washers had been increased by around 29% than that of the one without washers. In addition, to some extent, the bearing capacity of test pieces could be enhanced a lot by the extended time of bonding. However, the connection property with two rivets at the same direction as tensile test could not be improved.

Key words: rolling riveting, bonding, hybrid joint, tensile property

中图分类号:

TB332

黄志超, 冯佳, 张永超. 复合板料摆碾铆接、胶接和混合连接性能研究[J]. 玻璃钢/复合材料, 2017, 0(4): 54-59.

HUANG Zhi-chao, FENG Jia, ZHANG Yong-chao. CONNECTION PROPERTY OF JOINING COMPOSITE SHEETS WITH ROLLING RIVETING, BONDING AND HYBRID JOINTS[J]. Fiber Reinforced Plastics/Composites, 2017, 0(4): 54-59.

参考文献

[1] 沃西源. 复合材料胶接连接工艺[J]. 航天返回与遥感, 1996, 17(1): 52-58.
[2] 陈建祥, 王琼琦, 罗小乐. 复合材料管与接头胶接结构的强度与疲劳性能研究[J]. 玻璃钢/复合材料, 2012(1): 19-23.
[3] 曲文卿, 董峰, 齐志刚, 等. 异种材料的连接[J]. 航天制造技术, 2006(3): 44-49.
[4] Gang Li, Ji Hua Chen, Marko Yanishevsky, et al. Bellinger. Static strength of a composite butt joint configuration with different attachments[J]. Composite Structures, 2012(94): 1736-1744.
[5] 伍太宾. 国内外摆动辗压技术的研究和发展[J]. 精密成型工程, 2009, 1(3): 1-6.
[6] 黄志超, 刘晓坤, 占金青. 铝合金板料摆碾铆接与直压铆接比较分析[J]. 中国机械工程, 2013, 24(9): 1233-1239.
[7] 沈帆, 王钧, 蔡浩鹏. 不同铺层复合材料螺栓连接的研究[J]. 玻璃钢/复合材料, 2012(1): 39-43.
[8] 周祝林, 吴妙生. 复合材料胶接(上)[J]. 纤维复合材料, 1997(1): 51-55.
[9] 马海全, 王倩妮, 钱雷, 等. 胶接结构破坏模式及失效机理研究[J]. 失效分析与预防, 2012, 7(3): 162-166.
[10] 乔海涛, 赖士洪, 邹贤武. 胶铆连接性能研究[J]. 中国胶接剂, 2002, 11(1): 52-53.
[11] 王花娟, 杨杰, 刘新东, 等. 复合材料机械连接强度影响因素的研究进展[J]. 材料导报, 2007, 21(11)专辑Ⅸ: 438-440.
[12] 黄志超, 庞连红, 邱祖峰, 等. 摆碾铆接过程数值模拟分析[J]. 机械设计与制造, 2010(3): 193-195.
[13] Sang-Young Kim, Daniel J. Hennigan, Dave Kim. Influence of Fabrication and Interference-Fit Techniques on Tensile and Fatigue Properties of Pin-Loaded Glass Fiber Reinforced Plastics Composites[J]. Journal of Engineering Materials and Technology,2012(134): 1-8.
[14] Nabil Chowdhury, Wing Kong Chiu, John Wang, et al. Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures[J]. Composite Structures, 2015 (121): 315-323.
[15] 张洪双. 铆接工艺参数分析[J]. 机械设计与制造, 2011(6): 241-243.
[16] 张开. 难粘高分子材料的难粘原理[J]. 粘接, 1982(1): 5-10.
[17] 梅端, 王钧, 李君明, 等. 玻璃纤维增强树脂基复合材料拉-拉疲劳行为研究[J]. 玻璃钢/复合材料, 2013(2): 39-42.
[18] 袁辉, 刘鹏飞, 赵启林, 等. 胶-螺混合连接承载力的参数影响研究[J]. 玻璃钢/复合材料, 2013(3): 66-71.