感应焊接技术在民用飞机热塑性复合材料中的应用

玻璃钢/复合材料 ›› 2017, Vol. 0 ›› Issue (5): 99-104.

• 综述 • 上一篇

感应焊接技术在民用飞机热塑性复合材料中的应用

袁协尧, 杨洋, 见雪珍, 徐捷

上海飞机制造有限公司,上海201324

收稿日期:2016-11-17 出版日期:2017-05-28 发布日期:2017-05-28
作者简介:袁协尧(1987-),男,博士,工程师,主要从事民用飞机热塑性复合材料及先进胶接工艺方面的研究,yuanxieyao@comac.cc。
基金资助:
中国商飞创新基金(821503-05)

APPLICATION OF INDUCTION WELDING TECHNOLOGY IN CIVIL AIRCRAFT THERMOPLASTIC COMPOSITES

YUAN Xie-yao, YANG Yang, JIAN Xue-zhen, XU Jie

Shanghai Aircraft Manufacturing Company, Shanghai 201314, China

Received:2016-11-17 Online:2017-05-28 Published:2017-05-28

摘要/Abstract

摘要： 热塑性复合材料在民用飞机制造领域的应用近年来发展迅速,焊接技术是热塑性复合材料制造过程中的关键环节之一,是零件装配成部件必不可少的工艺过程。感应焊接技术是目前应用的几种焊接方法之一,通过感应线圈产生高频电磁场,加热电感材料使接头熔融,加压重新凝结后完成焊接过程。感应焊接工艺过程稳定,可实现连续化操作,受人为因素影响较小,是将来热塑性复合材料连接的重要发展方向。立足于提供此技术的基本原理,介绍此技术已取得的最新进展。同时,还介绍一些实验过程和实验装置。最后,还尝试简易描述焊接区域的温度场分布,以便于焊接实验者进行工艺参数评价。

关键词: 民用飞机, 热塑性复合材料, 感应焊接

Abstract: In recent years, the application of thermoplastic composites in civil aircraft is rapidly developed. Welding technology is an important connection process for thermoplastic composites manufacturing and essential process from single component to part. The induction welding technology introduced in this paper is one of the several welding methods used recently. In this technology, the induction coil is used to generate high frequency electromagnetic field, and then the susceptor material is heated. Induction welding is a stable process and can be realized continuously. The whole process is rarely affected by personnel factor. It is an important development direction to connect thermoplastic composites component in the future. Based on the nature of induction welding technology, this paper introduces the latest development of this technology. At the same time, this also introduces some experimental processing and devices. Finally, the temperature field distribution in the welding area is also briefly described, to help to evaluate the processing parameters.

Key words: civil aircraft, thermoplastic composite, induction welding

中图分类号:

TB332

袁协尧, 杨洋, 见雪珍, 徐捷. 感应焊接技术在民用飞机热塑性复合材料中的应用[J]. 玻璃钢/复合材料, 2017, 0(5): 99-104.

YUAN Xie-yao, YANG Yang, JIAN Xue-zhen, XU Jie. APPLICATION OF INDUCTION WELDING TECHNOLOGY IN CIVIL AIRCRAFT THERMOPLASTIC COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2017, 0(5): 99-104.

参考文献

[1] I. Y. Chang, J.K. Lees. Recent Development in Thermoplastic Composites: A Review of Matrix Systems and Processing Methods[J]. Journal of Thermoplastic Composite Materials, 1988, 1(3):277-296.
[2] F. Shadmehri. Effect of autoclave process on the quality of thermoplastic composite truncated cones manufactured using automated fiber placement technique[J]. Science and Engineering of Composite Materials, 2015, 22(2):175-186.
[3] J. A. E. Manson, J.C. Seferis. Press-forming of continuous-fiber-reinforced thermoplastic composites[J]. Polymer Composites, 1990, 11(2):114-120.
[4] R.L. Mazur, G.M. Candido, M.C. Rezende, et al. Accelerated aging effects on carbon fiber PEKK composites manufactured by hot compression molding[J]. Journal of Thermoplastic Composite Materials, 2014, 12(19): 1-14.
[5] K.C. Cole. A review of recent developments in joining high-performance thermoplastic composites[J]. Nasa Sti/recon Technical Report N, 1991, 92: 01.
[6] D. Stavrov, H. E. N. Bersee. Resistance welding of thermoplastic composites-an overview[J]. Composites Part A: Applied Science & Manufacturing, 2005, 36(1):39-54.
[7] R. Rashli, E.A. Bakar, S. Kamaruddin. A Review of Ultrasonic Welding of Thermoplastic Composites[J]. Caspian Journal of Applied Sciences Research, 2013, 2(3):01-16.
[8] P. Jaeschke, V. Wippo, O. Suttmann, et al. Advanced laser welding of high-performance thermoplastic composites[J]. Journal of Laser Applications, 2015, 27(S2):90041-90047.
[9] R. Rudolf, P. Mitschang, M. Neitzel. Induction heating of continuous carbon-fiber-reinforced thermoplastics[J]. Composites Part A: Applied Science & Manufacturing, 2000, 31(11):1191-1202.
[10] S. Yarlagadda, J.W. Gillespie, B.K. Fink. Resistive Susceptor Design for Uniform Heating during Induction Bonding of Composites[J]. Journal of Thermoplastic Composite Materials, 1998, 11(11):321-337.
[11] R.E. Haimbaugh, I. Ebrary. Practical induction heat treating[C]. ASM International, 2001.
[12] T.J. Ahmed, D. Stavrov, H.E.N. Bersee, et al. Induction welding of thermoplastic composites-an overview[J]. Composites Part A: Applied Science & Manufacturing, 2006, 37(10):1638-1651.
[13] D. Loveless, R. Cook, V. Rudnev. Considering nature and parameters of power supplies for efficient induction heat treating[J]. Ind Heat, 1995(7): 33.
[14] S. Mahdi, H.J. Kim, B.A. Gama, et al. A Comparison of Oven-cured and Induction-cured Adhesively Bonded Composite Joints[J]. Journal of Composite Materials, 2003, 37(6):519-542.
[15] S. Pappadà, A. Salomi,J. Montanaro, et al. Fabrication of a thermoplastic matrix composite stiffened panel by induction welding[J]. Aerospace Science & Technology, 2015, 43(2):314-320.
[16] R. Rudolf, P. Mitschang, M. Neitzel, et al. Welding of high-performance thermoplastic composites[J]. Polymers & Polymer Composites, 1999, 7(5):309-315.
[17] V. K. Stokes. Experiments on the induction welding of thermoplastics[J]. Polymer Engineering & Science, 2003, 43(43): 1523-1541.
[18] L. Augh, B.K. Fink. Degradation of Continuous Carbon Fiber Reinforced Polyetherimide Composites During Induction Heating[J]. Journal of Thermoplastic Composite Materials, 2001, 14(2): 96-115.
[19] J. Border, R. Salas. Induction heated joining of thermoplastic composites without metal susceptors[C]. Proceedings of the 34^th international SAMPE symposium, 1989: 2569-2578.

感应焊接技术在民用飞机热塑性复合材料中的应用

APPLICATION OF INDUCTION WELDING TECHNOLOGY IN CIVIL AIRCRAFT THERMOPLASTIC COMPOSITES

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郭伟健, 陶友瑞, 董丽君, 吴安如. 平纹玻纤/MC尼龙复合材料熔融黏合深度与搭接方式对力学性能的影响[J]. 复合材料科学与工程, 2022, 0(3): 110-114.
[2]	常舰, 肖海刚, 谢钟清, 毕华阳, 郑金华, 朱姝, 侯进森. 不同工艺参数和界面改性对碳纤维增强聚苯硫醚复合材料Ⅰ型层间断裂韧性的影响[J]. 复合材料科学与工程, 2022, 0(1): 22-28.
[3]	孙士勇, 董晨华, 刘冠三, 杨睿. 基于热气加热的热塑性复合材料原位成型过程中温度场分析[J]. 复合材料科学与工程, 2021, 0(9): 12-17.
[4]	张凤, 焦梦晓, 李博澜, 张骁骅. 碳纤维/聚醚酮酮界面强度影响因素的研究进展[J]. 复合材料科学与工程, 2021, 0(8): 112-119.
[5]	李佳乐, 李楠, 胡方圆, 蹇锡高, 刘程, 王锦艳. 乳化剂对耐高温热塑性水分散乳液上浆剂性能的影响[J]. 复合材料科学与工程, 2021, 0(4): 61-65.
[6]	李林秀, 岳广全, 杨洋, 李哲夫, 潘利剑, 刘卫平, 刘富. 连续碳纤维增强聚苯硫醚预浸料层间滑移行为研究[J]. 复合材料科学与工程, 2021, 0(2): 24-31.
[7]	王洪恩, 杨洋, 钱盈, 周剑锋, 朱姝. CF/PPS热塑复材试片感应焊接工艺初步研究[J]. 复合材料科学与工程, 2021, 0(12): 99-105.
[8]	梁宜楠, 杨睿, 王俊龙, 张博. 热塑性复合材料点阵铺放工艺对层间剪切强度的影响研究[J]. 复合材料科学与工程, 2021, 0(10): 61-66.
[9]	王子健, 周晓东. 连续纤维增强热塑性复合材料成型工艺研究进展[J]. 复合材料科学与工程, 2021, 0(10): 120-128.
[10]	汪晗, 倪爱清, 王继辉, 陈宏达. 玻璃纤维增强聚乙烯树脂热塑性复合材料的冲击定位[J]. 复合材料科学与工程, 2020, 0(7): 85-92.
[11]	周振君, 张宁, 王临江, 程静琪. 连续纤维增强聚醚砜复合材料制备及性能研究[J]. 复合材料科学与工程, 2020, 0(3): 70-74.
[12]	钱盈, 王家锋, 宋俣诺, 朱姝. 风冷和导热板对CF/PPS复合材料自感应焊接的影响[J]. 复合材料科学与工程, 2020, 0(10): 39-46.
[13]	王宇, 杨睿, 梁宜楠, 张一鸣. 原位冲压成型工艺参数对GFRTP黏度影响及优化研究[J]. 复合材料科学与工程, 2020, 0(10): 55-59.
[14]	单毫, 陈宇, 李俊杰, 姚钱. 红外加热缠绕成型工艺参数对CF/PEEK复合材料层间剪切性能的影响[J]. 玻璃钢/复合材料, 2020, 0(1): 39-46.
[15]	张佳新, 梅启林. CF/PPS编织复合材料的制备及力学性能研究[J]. 玻璃钢/复合材料, 2020, 0(1): 76-81.