玻璃钢/复合材料 ›› 2018, Vol. 0 ›› Issue (11): 73-77.

• 应用研究 • 上一篇    下一篇

聚(间二乙炔基苯-甲基氢硅烷-苯基硅烷)的陶瓷化研究

卢丹, 周权*, 耿杰, 宋宁   

  1. 华东理工大学特种功能高分子材料及相关技术教育部重点实验室,上海200237
  • 收稿日期:2018-07-31 出版日期:2018-11-28 发布日期:2018-11-28
  • 通讯作者: 周权(1973-),男,副教授,博士,主要从事高性能基体树脂方面的研究,qzhou@ecust.edu.cn。
  • 作者简介:卢丹(1993-),女,硕士研究生,主要从事硅芳炔树脂与玻璃纤维复合材料方面的研究。
  • 基金资助:
    国家自然科学基金资助项目(51573044)

STUDY ON THE CERAMICS OF POLY (M-DIETHYNYLBENZENE- METHYLSILANE-PHENYLSILANE)

LU Dan, ZHOU Quan*, GENG Jie, SONG Ning   

  1. Key Laboratory for Specially Functional Polymers and Related Technology of Ministry of Education of East China University of Science and Technology, Shanghai 200237, China
  • Received:2018-07-31 Online:2018-11-28 Published:2018-11-28

摘要: 选用聚(间二乙炔基苯-甲基氢硅烷-苯基硅烷)树脂(PDMP)固化物,研究其在高温作用下的热解产物及其陶瓷化。借助X射线衍射(XRD)、能谱仪(EDS)和扫描电镜(SEM)等分析测试方法表征了高温热解产物的组成、结构和形貌。结果表明,热解产物表面出现许多凸起状的小球,且分布较为均匀,形成了陶瓷晶体。该陶瓷晶体的结构为Si-C,树脂固化物的陶瓷产率达80.83%。

关键词: 耐高温, 硅芳炔树脂, 热解, 陶瓷前驱体

Abstract: In this paper, the cured poly (m-diethynylbenzene-methylsilane-phenylsilane) resin (PDMP) was used to study cracking and ceramics under high temperature. The composition, structure and morphology of pyrolysis products were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and scanning electron microscope (SEM). The results showed that many bulging balls were found on the surface of the pyrolysis products and distributed uniformly. It showed that ceramic of SiC structure crystals was formed, and the ceramic yield of the cured resin was 80.83%.

Key words: high temperature resistant, silicon aryne resin, pyrolysis, preceramic

中图分类号: