纤维增强树脂基复合材料连接技术研究现状与展望

摘要/Abstract

摘要： 总结回顾了复合材料连接技术的研究现状。分别阐述了机械连接、胶接和混合连接的连接形式、优缺点、适用领域以及发展前景。结果表明:复合材料传统的机械连接具有较强的抗层间剪切能力和抗剥离性能,适合于承受重载载荷;胶接由于质轻、连接效率高,且适宜薄壁复杂结构件,是一种高效实用且低成本的连接工艺;二者配合使用的混合连接兼具机械连接的质量安全可靠、便于拆装,以及胶接的抗恶劣环境、可连接异质件的优点。最后得出复合材料连接技术在未来将向着结构一体化方向发展的结论。

关键词: 复合材料, 机械连接, 胶接, 混合连接, 前景展望

Abstract: The current research status of the joint techniques of composite materials is reviewed, which includes the mechanical joint, adhesive joint and hybrid joint. The advantages and disadvantages, applicable fields, and the prospect of these joints are explained in this study. The results show the traditional mechanical joint has strong ability to resist the inter-laminar shear and stripping, which is suitable for heavy load. The adhesive joint is a kind of efficient and low-cost joint techniques with light weight and high efficiency, so it suits for complicated thin-walled parts. And the hybrid joint has the advantages of the mechanical joint and the adhesive joint, namely, the reliable quality and resistance to the harsh environment, so it can join the heterogeneous parts. Finally, the join techniques of composite materials in the direction of structural integration in the future are discussed.

Key words: composite materials, mechanical joints, adhesive joints, hybrid joints, prospects

中图分类号:

TB332

高佳佳, 楚珑晟. 纤维增强树脂基复合材料连接技术研究现状与展望[J]. 玻璃钢/复合材料, 2018, 0(2): 101-108.

GAO Jia-jia, CHU Long-sheng. PRESENT SITUATION AND PROSPECT OF RESEARCH ON THE JOIN TECHNOLOGY OF COMPOSITE MATERIALS[J]. Fiber Reinforced Plastics/Composites, 2018, 0(2): 101-108.

参考文献

[1] 唐见茂. 航空航天复合材料发展现状及前景[J]. 航天器环境工程, 2013, 30(4): 352-359.
[2] 张大为. 复合材料机翼结构工程优化设计与分析方法[D]. 哈尔滨: 哈尔滨工业大学, 2015.
[3] 赵美英. 复合材料机械连接失效分析及强度影响因素研究[D]. 西安: 西北工业大学, 2006.
[4] 赵程, 罗昆, 张恒. 复合材料的研究现状及展望[J]. 浙江万里学院学报, 2005, 18(2): 103-107.
[5] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1): 1-12.
[6] Danilov A I. Some aspects of CFRP steel structures reinforcement in civil engineering[J]. Procedia Engineering, 2016, 150: 1831-1836.
[7] Verzhbovskiy G B. Method of composite materials characteristics forecasting[J]. Procedia Engineering, 2016, 150: 1831-1836.
[8] 张阿盈. 复合材料胶接搭接接头应力分析方法研究[J]. 航空工程进展, 2012, 3(2): 167-173.
[9] 唐玉玲, 周振功, 泮世东, 等. 三维六向编织复合材料单剪搭接连接结构在拉伸载荷下的力学性能[J]. 复合材料学报, 2015, 32(2): 515-525.
[10] Zhao T, Palardy G, Villegas I F, et al. Mechanical behaviour of thermoplastic composites spot-welded and mechanically fastened joints: A preliminary comparison[J]. Composites Part B Engineering, 2016, 112: 224-234.
[11] Atas A, Soutis C, Arslan N. A qualitative comparison of stresses at aircraft bolted joint holes under initial clamping force[J]. Procedia Engineering, 2011, 10(7): 3-8.
[12] 王花娟, 杨杰, 刘新东, 等. 复合材料机械连接强度影响因素的研究进展[J].材料导报, 2007, 21(S3): 438-440.
[13] 张俊琪, 刘龙权, 陈昆昆, 等. 干涉配合对复合材料机械连接结构承载能力的影响[J]. 上海交通大学学报, 2013, 47(11): 1795-1800.
[14] 韩转英.复合材料结构连接形式与强度研究[J].军民两用技术与产品, 1998(1): 18-18.
[15] Mouring S E, Louca L, Brambleby R. Behavior of perforated metal-to-composite joints subjected to tensile loading[C]//Oceans. IEEE, 2016: 1-8.
[16] 冀赵杰, 关志东. 复合材料层合板连接结构挤压破坏研究[C]//中国科协年会. 2013.
[17] 张震, 温永海, 徐忠岩, 等. 复合材料结构机械连接设计分析与试验研究[J]. 南京航空航天大学学报, 2015, 47(2): 314-318.
[18] Altan G, Topcu M. An investigation on damage loads of mechanical butt joints in composite structures[J]. Journal of Reinforced Plastics and Composites, 2015, 34(10): 839-853.
[19] 刘旭波. 螺栓拧紧力矩对复合材料连接强度影响试验研究[J]. 科技创新导报, 2014(23): 26-26.
[20] 黄河源, 赵美英, 万小朋, 等. 沉头复合材料中厚板连接结构强度与损伤失效研究[J]. 复合材料学报, 2016, 34(3): 557-563.
[21] 赵美英. 复合材料机械连接失效分析及强度影响因素研究[D]. 西安: 西北工业大学, 2006.
[22] Kradinov V, Madenci E, Ambur D R. Combined in-plane and through-the-thickness analysis for failure prediction of bolted composite joints[J]. Composite Structures, 2007, 77(2): 127-147.
[23] 王佩艳, 王富生, 朱振涛, 等. 复合材料机械连接件的三维累积损伤研究[J].机械强度, 2010, 32(5): 124-128.
[24] 段元欣. CFRP螺栓干涉连接结构预紧行为及静强度研究 [D]. 西安: 西北工业大学, 2015.
[25] 宋丹龙, 张开富, 钟衡, 等. 层合板干涉螺接分层损伤及其临界干涉量[J].航空学报, 2016, 37(5): 1677-1688.
[26] Chakherlou T N, Mirzajanzadeh M, Vogwell J. Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints[J]. Engineering Failure Analysis, 2009, 16(7): 2066-2080.
[27] 陈昆昆, 刘龙权, 汪海. 过盈配合和预紧力的混合作用对复合材料机械连接结构的影响及其机制[J]. 复合材料学报, 2013, 30(6): 243-251.
[28] 魏景超. 复合材料结构新型紧固件连接强度与失效机理[D]. 西安: 西北工业大学, 2014.
[29] 魏景超, 矫桂琼, 闫照明, 等.单面螺纹抽钉干涉配合复合材料连接件挤压强度研究[J]. 航空学报, 2013, 34(7): 1627-1635.
[30] Cao Z, Cardewhall M. Interference-fit riveting technique in fiber composite laminates[J]. Aerospace Science and Technology, 2006, 10(4): 327-330.
[31] Gay A, Lefebvre F, Bergamo S, et al. Fatigue performance of a self-piercing rivet joint between aluminum and glass fiber reinforced thermoplastic composite[J]. International Journal of Fatigue, 2016, 83: 127-134.
[32] 沃西源, 涂彬, 夏英伟. 航天器复合材料胶接连接工艺分析[J]. 航天返回与遥感, 2008, 29(4): 62-66.
[33] 王琦洁. 复合材料连接设计和分析[C]//全国复合材料学术会议. 2012.
[34] 梁祖典, 燕瑛, 张涛涛, 等. 复合材料单搭接胶接接头试验研究与数值模拟[J]. 北京航空航天大学学报, 2014, 40(12): 1786-1792.
[35] 彭海俊, 秦志文, 王继辉, 等. 胶接面纤维铺层角度对复合材料胶接应力和强度影响分析[J]. 玻璃钢/复合材料, 2017(4): 29-34.
[36] Icardi S F. Analysis of bonded joints with laminated adherends by a variable kinematics layerwise model[J]. International Journal of Adhesion & Adhesives, 2014, 50(4): 244-254.
[37] Parida S K, Pradhan A K. Effect of material anisotropy on delamination damage in adhesive bonded lap shear joints made with curved laminated FRP composite panels[J]. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2016, 40(4): 275-287.
[38] Zaldivar R J, Steckel G L, Nokes J P, et al. Characterization of atmospheric plasma as a surface preparation process for the bonding of space composite materials[J]. The Journal of Strain Analysis for Engineering Design, 2013, 49(3): 171-178.
[39] Müller M, Valsek P. Adhesive bond of carbon steel S235j0: effects of aluminium and polymer powder filled epoxy adhesives on mechanical properties[J]. Advances in Science and Technology Research Journal, 2016, 10(31): 87-93.
[40] Diharjo K, Firdaus Y, Raharjo W W, et al. Improvement of strength on joint of GFRP/A1-5083 joint using Epoxy/Al-powder adhesive for electric vehicle car body[C]//Proceedings of the International Conference on Electrical Engineering and Computer Science. 2014.
[41] Moosburger J, Sause M G R, Horny R, et al. Joining of carbon fiber reinforced polymer laminates by a novel partial cross-linking process[J]. Journal of Applied Polymer Science, 2015, 132, 42159.
[42] 乔海涛, 邹贤武. 碳纤维复合材料的胶接工艺与性能[J]. 宇航材料工艺, 2009, 39(1): 66-69.
[43] Avendaño O R, Carbasr J C, Marques E A S, et al. Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive[J]. Composite Structures, 2016, 152: 34-44.
[44] Fernandes R L, Demoura M F S F, Moreira R D F. Effect of moisture on pure mode Ⅰ and Ⅱ fracture behaviour of composite bonded joints[J]. International Journal of Adhesion and Adhesives, 2016, 68: 30-38.
[45] Agarwal A, Foster S J, Hamed E. Testing of new adhesive and CFRP laminate for steel-CFRP joints under sustained loading and temperature cycles [J]. Composites Part B: Engineering, 2016, 99: 235-247.
[46] Abusrea M R, Arakawa K. Improvement of an adhesive joint constructed from carbon fiber-reinforced plastic and dry carbon fiber laminates[J]. Composites Part B: Engineering, 2016, 97: 368-373.
[47] Moya-Sanz E M, Ivañez I, Garcia-Castillo S K. Effect of the geome-try in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load[J]. International Journal of Adhesion & Adhesives, 2016, 72: 23-29.
[48] Stelzer S, Ucsnik S, Pinter G. Strength and damage tolerance of composite-composite joints with steel and titanium through the thickness reinforcements[J]. Composites Part A: Applied Science and Manufacturing, 2016, 88: 39-47.
[49] 杨琨, 侯进森, 万党水, 等. 异种金属与碳纤维复合材料胶铆工艺探索[J]. 上海汽车, 2016, 10: 59-62.
[50] 温锋, 周福继, 龚丽娟. 复合材料胶接-缝合连接设计研究[J]. 硅谷, 2014, 17: 117-117.
[51] 董晓阳, 李勇, 李吻, 等. Z-pin增强树脂基复合材料单搭接头弯曲性能[J].材料工程, 2015, 43(2): 26-34.
[52] Chowdhury N, Chiu W K, Wang J, et al. Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures[J]. Composite Structures, 2015, 121: 315-323.
[53] Raju K P, Bodjona K, Lim G H, et al. Improving load sharing in hybrid bonded/bolted composite joints using an interference-fit bolt[J]. Composite Structures, 2016, 149: 329-338.
[54] 黄文俊, 程小全, 武鹏飞, 等. 复合材料混合连接结构拉伸性能与影响因素分析[J]. 北京航空航天大学学报, 2013, 39(10): 1408-1413.
[55] 曹增强. 新机研制中的复合材料结构装配关键技术[J]. 航空制造技术, 2009, 15: 38-42.
[56] 邓将华, 程溧, 王林峰. 自激励式电磁铆接放电电流分析[J]. 航空学报, 2016, 38(5): 420669.
[57] 张旭. 电磁铆接过程铆钉动态塑性变形行为及组织性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2016.
[58] 焦亚男, 李嘉禄, 孙其永. 缝合连接三维编织复合材料弯曲破坏形式分析[J].固体火箭技术, 2010, 33(1): 104-107.
[59] Perillo G, Vedivik N, Echtermeyer A. Damage development in stitch bonded GFRP composite plates under low velocity impact: Experimental and numerical results[J]. Journal of Composite Materials, 2014, 49(5): 601-615.
[60] 张涛涛, 周洪, 史文华, 等. Z-pin植入对二维机织复合材料层合板力学性能影响的数值模拟[J].复合材料学报, 2014, 31(2): 295-303.
[61] 李吻, 李勇, 还大军, 等. Z-pin增强复合材料帽型单加筋板弯曲性能[J].航空学报, 2016, 37(12): 3843-3852.