复合材料单面双线缝合装置的设计

玻璃钢/复合材料 ›› 2018, Vol. 0 ›› Issue (2): 83-86.

复合材料单面双线缝合装置的设计

田会方, 刘丽君^*, 陈培

武汉理工大学机电工程学院,武汉430070

收稿日期:2017-06-28 出版日期:2018-02-28 发布日期:2018-02-28
通讯作者: 刘丽君(1993-),女,硕士研究生,研究方向为复合材料装备与控制,15997498049@163.com。
作者简介:田会方(1963-),男,硕士,教授,研究方向为复合材料成型技术及计算机仿真。

DESIGN OF SINGLE-SIDE DOUBLE-LINE STITCHING DEVICE FOR COMPOSITES

TIAN Hui-fang, LIU Li-jun^*, CHEN Pei

School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan Hubei 430070, China

Received:2017-06-28 Online:2018-02-28 Published:2018-02-28

摘要/Abstract

摘要： 通过对复合材料的缝合技术和缝合特点的概述,发现目前双面缝合以及单面缝合技术存在的问题和不足,然后结合现有的OSS单面缝合和传统的双面锁式缝合技术的优点,提出了单面双线缝合技术,并基于该技术的缝合动作利用建模软件SolidWorks对缝合装置进行了详细的设计,该技术对纤维复合材料铺层的缝合能够形成平滑稳定的类似改良式锁式线迹。最后通过Adams进行运动仿真,验证了各机构能够按规律配合完成缝合动作,证明了缝合装置设计的可行性。

关键词: 双线单面缝合, 改良式锁式线迹, 缝合装置, Adams

Abstract: Through the analysis of the suture technology and the characteristics of the suture, the problems and shortcomings of the existing double-sided suture and the single-side suture techniques are found. Then, by combining with the advantages of the existing OSS single-side suture and the traditional double-sided hook suture, this paper presents a single-side double-line suture technology. And, based on this technology, the detailed structure has been designed, and the 3D model has been built by SolidWorks. This suture technology can form a smooth and stable line similar to the improved hook line. Finally, Adams has been used to verify the feasibility of the design.

Key words: single-side, double line Stitching, improved lock line trace, the hook, Adams

中图分类号:

TB332

田会方, 刘丽君, 陈培. 复合材料单面双线缝合装置的设计[J]. 玻璃钢/复合材料, 2018, 0(2): 83-86.

TIAN Hui-fang, LIU Li-jun, CHEN Pei. DESIGN OF SINGLE-SIDE DOUBLE-LINE STITCHING DEVICE FOR COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2018, 0(2): 83-86.

参考文献

[1] 赵忠华. 浅析博采众长的复合材料[J]. 硅谷, 2010(3): 146-146.
[2] Bakis C E, Smith E C, Tiwari C, et al. Innovative energy absorbing composite material for crashworthy structures[J]. 2010
[3] Melchior A, Pouliquen M, Soler E. Thermostructural composite materials for liquid propellant rocket engines[J]. Journal of Histochemistry & Cytochemistry Official Journal of the Histochemistry Society, 2013, 45(9): 1207-1215.
[4] 毛春见, 许希武, 郑达. 缝合复合材料层板低速冲击及冲击后压缩实验研究[J]. 复合材料学报, 2012, 29(2): 160-166.
[5] 王永军, 何俊杰, 元振毅, 等. 航空先进复合材料铺放及缝合设备的发展及应用[J]. 航空制造技术, 2015, 483(14): 38-43.
[6] 丁峰, 田会方, 徐德帆, 等. 一种基于双凸轮的单面缝合机构设计[J]. 机械研究与应用, 2016, 29(2): 155-157.
[7] 杨旭, 李亮玉, 王天琪, 等. 基于双针的单面缝合机构设计[J]. 纺织学报, 2008, 29(11): 115-118.
[8] Herbeck L, Kleineberg M, Schöppinger C. Foam cores in RTM structures, manufacturing aid of high-performance sandwich[C]//International Sampe Europe Conference and Tutorials/jec. Paris: DLR, 2002: 515-525.
[9] 滑聪. 缝合复合材料层合板的制备及性能研究[D]. 武汉: 武汉理工大学, 2013.
[10] Yang T, Zhang J, Mouritz A P, et al. Healing of carbon fibre-epoxy composite T-joints using mendable polymer fibrestitching[J]. Composites Part B Engineering, 2013, 45(1): 1499-1507.
[11] 濮良贵. 机械设计[M]. 第九版. 北京: 高等教育出版社,2013.
[12] Jan Bosova. Sewing machine foundation [M]. High Enthalpy Translation. Beijing Science and Technology Press, 2014: 16-28.
[13] 山本勇二, 麻生英夫, 西修宏,等. 平缝双针缝纫机的旋梭装置: CN 1412374 A[P]. 2003.
[14] 汪峰, 吴世林. 三维缝纫机械手的设计[J]. 机电产品开发与创新, 2010, 23(3): 29-31.
[15] 李军. ADAMS实例教程[M]. 北京: 北京理工大学出版社, 2002.