外贴式CFRP加固钢筋混凝土梁耐火性能研究综述

摘要/Abstract

摘要： CFRP作为一种新型加固材料已有很长一段历史。外贴式CFRP加固技术(Externally Bonded Reinforced,简称“EBR-CFRP”)是最常用的CFRP加固技术之一。但由于CFRP对温度较为敏感,基体在温度超过其玻璃化温度(T_g)后发生分解,导致CFRP各项力学性能急剧退化并丧失,这严重影响了该技术在建筑工程领域里的推广和发展。结合近十年关于EBR-CFRP加固钢筋混凝土梁耐火性能的相关研究,就CFRP和CFRP-混凝土接触面的高温特性,EBR-CFRP加固梁耐火性能的试验研究、数值分析和预测方法等多个方面的研究成果进行了系统总结,并提出了进一步的研究方向。

关键词: CFRP, 外贴式加固技术, 耐火性能, 预测方法

Abstract: CFRP have been used for a long time as a new kind of reinforcing material. Externally Bonded Reinforced (EBR) is one of the most commonly technologies used in CFRP reinforcement works. But CFRP is sensitive to temperature. When the temperature exceeds the glass transition temperature(T_g)of CFRP, the matrix used to cure the fibers will soften, which leads to the rapid degradation of the mechanical properties of CFRP. This has seriously affected the development of this technology in the field of civil engineering. For solving the problem, many research was done. This paper presents a review of studies on the high temperature properties of CFRP, CFRP-concrete contact surface and fire resistance of EBR-CFRP strengthened beams. In general, when the temperature reaches about 300 ℃, the matrix in CFRP will melt. The tensile strength of CFRP strips will degrade to 50% of their original strength. However, the CFRP-concrete interface is also sensitive to fire. Without fire prevention, the CFRP strips are easy to spin-off. One of the most effective measures is setting fire insulation at the surface of beams. However, there is no integrated theory of fire-resistance design for CFRP strengthened beams up to now. Recommendations for further research are given at the end of the paper.

Key words: CFRP, externally bonded reinforced, fire resistance, prediction method

中图分类号:

TB332

尹仲昊, 徐杰, 韩庆华. 外贴式CFRP加固钢筋混凝土梁耐火性能研究综述[J]. 玻璃钢/复合材料, 2018, 0(2): 94-100.

YIN Zhong-hao, XU Jie, HAN Qing-hua. A LITERATURE REVIEW OF FIRE BEHAVIOUR OF RC BEAMS STRENGTHENED WITH EBR-CFRP STRIPS[J]. Fiber Reinforced Plastics/Composites, 2018, 0(2): 94-100.

参考文献

[1] 叶列平, 冯鹏. FRP在工程结构中的应用与发展[J]. 土木工程学报, 2006, 39(3): 24-36.
[2] Feng P, Ye L, Bao R, et al. A large-span woven web suspension roof system made of high-strength FRP[J]. Iabse Symposium Report, 2000, 88(3): 43-48.
[3] Meier U, Stoecklin I, Terrasi G P. Making better US of the strength of advanced materials in structural engineering[C]//FRP Composites in Civil Engineering. Proceedings of the International Conference on FRP composites in Civil Engineering. 2001 (Volume 1).
[4] Maeda K, Ikeda T, Nakamura H, et al. Feasibility of ultra long-span suspension bridges made of all plastics[J]. British Journal of Nutrition, 2002, 2(2): 70-77.
[5] 冯鹏. 新型FRP空心桥面板的设计开发与受力性能研究[D]. 北京: 清华大学, 2004.
[6] Halliwell S. In-service performance of glass reinforced plastic composites in buildings[J]. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 2004, 157(1): 99-104.
[7] Terrasi G P. Prefabricated thin-walled structural elements made from high performance concrete prestressed with CFRP wires[J]. Journal of Materials Science Research, 2012, 2(1): 1.
[8] López C, Firmo J P, Correia J R, et al. Fire protection systems for reinforced concrete slabs strengthened with CFRP laminates[J]. Construction & Building Materials, 2013, 47(47): 324-333.
[9] Dias S J E, Barros J A O. Performance of reinforced concrete T beams strengthened in shear with NSM CFRP laminates[J]. Steel Construction, 2010, 32(2): 373-384.
[10] Correia L, Teixeira T, Michels J, et al. Flexural behaviour of RC slabs strengthened with prestressed CFRP strips using different anchorage systems[J]. Composites Part B, 2015, 81: 158-170.
[11] Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures: ACI, ACI 440. 2R-08[S]. Michigan: American Concrete Institute, 2002.
[12] 高皖扬. 碳纤维加固混凝土梁耐火试验研究与理论分析[D]. 上海: 同济大学, 2007.
[13] Mouritz A P, Gibson A G. Fire properties of polymer composite materials[M]. Berlin: Springer Science & Business Media, 2007.
[14] 高皖扬, 胡克旭. 碳纤维加固混凝土结构耐火性能研究与展望[J]. 玻璃钢/复合材料, 2008(2): 47-52.
[15] 高皖扬, 陆洲导, 胡克旭. FRP材料的火灾(高温)性能研究进展[J]. 土木建筑与环境工程, 2008, 30(6): 128-135.
[16] Michels J, Widmann R, Czaderski C, et al. Glass transition evalu-ation of commercially available epoxy resins used for civil engineering applications[J]. Composites Part B Engineering, 2015, 77: 484-493.
[17] Wang K, Young B, Smith S T. Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures[J]. Engineering Structures, 2011, 33(7): 2154-2161.
[18] Gibson A G. Laminate theory analysis of composites under load in fire[J]. Journal of Composite Materials, 2006, 40(7): 639-658.
[19] Yu B, Kodur V. Effect of temperature on strength and stiffness properties of near-surface mounted FRP reinforcement[J]. Composites Part B Engineering, 2014, 58(3): 510-517.
[20] Yu B, Kodur V K R. Effect of high temperature on bond strength of near-surface mounted FRP reinforcement[J]. Composite Structures, 2014, 110(1): 88-97.
[21] Galati N, Nanni A, Dharani L R, et al. Thermal effects on bond between FRP rebars and concrete[J]. Composites Part A Applied Science & Manufacturing, 2006, 37(8): 1223-1230.
[22] 王晓璐, 査晓雄, 张旭琛. 高温下FRP筋与混凝土的粘结性能[J]. 哈尔滨工业大学学报, 2013, 45(6): 8-15.
[23] Blontrock H. Analysis and modeling of the fire resistance of concrete elements with externally bonded FRP reinforcement[D]. Ph. D. thesis, Ghent Univ., Ghent, Belgium, 2003.
[24] Klamer E L, Hordijk D A, Janssen H J M. The influence of temperature on the debonding of externally bonded CFRP[J]. Aci Special Publication, 2005.
[25] Zhishen Wu, Iwashita K, Yagashiro S, et al. Temperature effect on bonding and debonding behavior between FRP sheets and concrete[J]. Journal of the Society of Materials Science Japan, 2005, 54(5): 474-480.
[26] Leone M, Matthys S, Aiello M A. Effect of elevated service temperature on bond between FRP EBR systems and concrete[J]. Composites Part B Engineering, 2009, 40(1): 85-93.
[27] Firmo J P, Correia J R, Pitta D, et al. Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures[J]. Cement & Concrete Composites, 2015, 60: 44-54.
[28] Gao W Y, Teng J G, Dai J G. Effect of temperature variation on the full-range behavior of FRP-to-concrete bonded joints[J]. Journal of Composites for Construction, 2014, 16(6): 671-683.
[29] Yuan H, Teng J G, Seracino R, et al. Full-range behavior of FRP-to-concrete bonded joints[J]. Engineering Structures, 2004, 26(5): 553-565.
[30] Dai J G, Gao W Y, Teng J G. Bond-slip model for FRP laminates externally bonded to concrete at elevated temperature[J]. Journal of Composites for Construction, 2014, 17(2): 217-228.
[31] Blontrock H, Taerwe L, Vandevelde P. Fire tests on concrete beams strengthened with fibre composite laminates[C]//Proceedings of the International PhD Symposium in Civil Engineering. Vienna (Austria): Volume 2, 2000: 151-161.
[32] Williams B, Kodur V, Green M F, et al. Fire endurance of fiber-reinforced polymer strengthened concrete T-Beams[J]. ACI Structural Journal, 2008, 105(1): 60-67.
[33] Green M F, Adelzadeh M, Bénichou N. Behaviour of fibre rein-forced polymer-strengthened T-beams and slabs in fire[J]. Structures & Buildings, 2012, 165(7): 361-371.
[34] Firmo J P, Correia J R, França P. Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: Protection systems with insulation of the anchorage zones[J]. Composites Part B Engineering, 2012, 43(3): 1545-1556.
[35] 高皖扬, 胡克旭, 陆洲导. CFRP加固钢筋混凝土梁耐火性能试验研究[J]. 土木工程学报, 2010(3): 15-23.
[36] 刘汾涛, 吴波, 魏德敏. 碳纤维布抗弯加固混凝土梁的火灾行为[J]. 工程力学, 2011, 28(9): 72-78.
[37] Dong K, Hu K, Gao W. Fire behavior of full-scale CFRP-strengthened RC beams protected with different insulation systems[J]. 2016, 15(3): 581-588.
[38] Hawileh R A, Naser M, Zaidan W, et al. Modeling of insulated CFRP-strengthened reinforced concrete T-beam exposed to fire[J]. Engineering Structures, 2009, 31(12): 3072-3079.
[39] Ahmed A, Kodur V K R. Effect of bond degradation on fire resist-ance of FRP-strengthened reinforced concrete beams[J]. Composites Part B Engineering, 2011, 42(2): 226-237.
[40] Dai J G, Gao W Y, Teng J G. Finite element modeling of insulated FRP-strengthened RC beams exposed to fire[J]. Journal of Composites for Construction, 2014, 19(2): 428-432.
[41] Firmo J P, Arruda M R T, Correia J R. Numerical simulation of the fire behaviour of thermally insulated reinforced concrete beams strengthened with EBR-CFRP strips[J]. Composite Structures, 2015, 126: 360-370.
[42] Firmo J P, Arruda M R T, Correia J R, et al. Three-dimensional finite element modelling of the fire behaviour of insulated RC beams strengthened with EBR and NSM CFRP strips[J]. Composite Structures, 2017.
[43] Arruda M R T, Firmo J P, Correia J R, et al. Numerical modelling of the bond between concrete and CFRP laminates at elevated temperatures[J]. Engineering Structures, 2016, 110: 233-243.
[44] 吴波, 王军丽. 碳纤维布加固钢筋混凝土板的耐火极限分析[J]. 工程抗震与加固改造, 2009, 31(5): 14-22.
[45] 万志军. 碳纤维布抗弯加固钢筋混凝土梁的耐火性能研究[D]. 广州: 华南理工大学, 2006.
[46] Gao W Y, Dai J G, Teng J G. Fire resistance design of un-protected FRP-strengthened RC beams[J]. Materials and Structures, 2016(12): 1-15.
[47] Kodur V K R, Yu B. Rational approach for evaluating fire resistance of FRP-strengthened concrete beams[J]. Journal of Composites for Construction, 2016, 20(6): 04016041.
[48] Kodur V K R, Yu B, Dwaikat M M S. A simplified approach for predicting temperature in reinforced concrete members exposed to standard fire[J]. Fire Safety Journal, 2013, 56(1): 39-51.
[49] Palmieri A, Matthys S, Taerwe L. Fire endurance and residual strength of insulated concrete beams strengthened with near-surface mounted reinforcement[J]. Journal of Composites for Construction, 2013, 17(4): 454-462.
[50] Yu B, Kodur V K R. Fire behavior of concrete T-beams strengthened with near-surface mounted FRP reinforcement[J]. Engineering Structures, 2014, 80: 350-361.
[51] Yu B. Fire response of reinforced concrete beams strengthened with near-surface mounted FRP reinforcement[M]. Michigan: Michigan State University, 2013.