预埋碳纳米纸增强CFRP层合板弯曲性能分析

复合材料科学与工程 ›› 2019, Vol. 0 ›› Issue (11): 69-73.

预埋碳纳米纸增强CFRP层合板弯曲性能分析

王萌¹, 王共冬^1,2*

1.沈阳航空航天大学航空宇航学院,沈阳 110136;
2.沈阳航空航天大学航空制造工艺数字化国防重点实验室,沈阳 110136

收稿日期:2019-01-21 出版日期:2019-11-28 发布日期:2019-11-28
通讯作者: 王共冬(1979-),男,博士,教授,研究方向为复合材料数字化制造,cadcam119@126.com。
作者简介:王萌(1997-),女,硕士研究生,研究方向为复合材料钻削加工。
基金资助:
辽宁省教育厅基金(L201734);辽宁省博士启动基金重点项目(20170520019)

STUDY ON FLEXURAL PROPERTIES OF CFRP LAMINATED PLATE REINFORCED BY EMBEDDED CARBON CNTS BUCKYPAPER

WANG Meng¹, WANG Gong-dong^1,2*

1.Aerospace Academy, Shenyang Aerospace University, Shenyang 110136, China;
2.Key Laboratory of Fundamental Science for National Defence of Aeronautical Digital Manufacturing Process, Shenyang Aerospace University, Shenyang 110136, China

Received:2019-01-21 Online:2019-11-28 Published:2019-11-28

摘要/Abstract

摘要： 为了研究碳纤维增强复合材料的弯曲性能,本文采取层间预埋碳纳米纸的方法制备CFRP层合板,进行三点弯曲加载下的静力实验,通过分析弯曲应力-应变曲线以及对比试件弯曲极限载荷,研究碳纳米纸以及固化压力对CFRP弯曲性能的影响。研究结果表明:预埋碳纳米纸能够有效增强CFRP的弯曲强度以及极限弯曲承载能力;固化压力的提高可增强预埋碳纳米纸CFRP的机械性能,固化压力为2 MPa时达到最佳增强效果。

关键词: 预埋碳纳米纸, CFRP, 三点弯曲, 机械性能

Abstract: In order to study the bending properties of carbon fiber reinforced composites, CFRP laminates were prepared by pre-buried carbon nanosheets. The static experiments under three-point bending loading were carried out. The bending stress-strain curves and bending limits of the specimens were analyzed to study the effect of carbon nanopaper and curing pressure on CFRP bending properties. The results show that the pre-embedded CNTs buckypaper can effectively enhance the CFRP bending strength and ultimate bending load-bearing capacity. The curing pressure can enhance the mechanical properties of the pre-embedded CNTs buckypaper CFRP, and the best strengthening effect is achieved when the curing pressure is 2 MPa.

Key words: embedded CNTs buckypaper, CFRP, three-point bending, mechanical properties

中图分类号:

TB332

王萌, 王共冬. 预埋碳纳米纸增强CFRP层合板弯曲性能分析[J]. 复合材料科学与工程, 2019, 0(11): 69-73.

WANG Meng, WANG Gong-dong. STUDY ON FLEXURAL PROPERTIES OF CFRP LAMINATED PLATE REINFORCED BY EMBEDDED CARBON CNTS BUCKYPAPER[J]. Composites Science and Engineering, 2019, 0(11): 69-73.

参考文献

[1] 李树健, 湛利华, 周源琦, 等. 基于图像处理的碳纤维增强树脂基复合材料固化压力-缺陷-力学性能建模与评估[J]. 复合材料学报, 2018, 35(12): 3368-3376.
[2] Dalina W A D W, Tan S H, Mariatti M. Properties of fiberglass/MWCNT buckypaper/epoxy laminated composites[J]. Procedia Chemistry, 2016, 19: 935-942.
[3] 党晨阳, 马俊丽, 吴银秋, 等. 氧化石墨烯增强碳纤维/环氧复合材料的制备及其力学性能研究[J]. 玻璃钢, 2017(2): 1-4.
[4] Watson G, Starost K, Bari P, et al. Tensile and flexural properties of hybrid graphene oxide epoxy carbon fibre reinforced composites[C]//.3rd International Conference on Structur Nano Composi-tion. 2017.
[5] He Y, Tian G, Pan M, et al. Impact evaluation in carbon fiber reinforced plastic (CFRP) laminates using eddy current pulsed thermography[J]. Composite Structures, 2014, 109(1): 1-7.
[6] 沈小军, 孟令轩, 付绍云. 石墨烯-多壁碳纳米管协同增强环氧树脂复合材料的低温力学性能[J]. 复合材料学报, 2015, 32(1): 21-26.
[7] Mishnaevsky L, Dai G. Hybrid carbon/glass fiber composites: Micromechanical analysis of structure-damage resistance relationships[J]. Computational Materials Science, 2014, 81: 630-640.
[8] Salleh N, Mohd Sam A R, Mohd Yatim J. Flexural behavior of GFRP RC beam strengthened with carbon fiber reinforced polymer (CFRP) plate: Cracking behavior[J]. Applied Mechanics and Materials, 2015, 752-753: 610-616.
[9] Salleh N, Mohd. Sam A R, Mohd Yatim J, et al. Flexural behaviour of reinforced concrete beam with glass fiber reinforced polymer (GFRP) bar strengthened with carbon fiber reinforced polymer (CFRP) plate[J]. Advanced Materials Research, 2014, 1051: 748-751.
[10] Li N, Wang G D, Melly S K, et al. Interlaminar properties of GFRP laminates toughened by CNTs buckypaper interlayer[J]. Composite Structures, 2019, 208: 13-20822.
[11] 张远, 于妍妍, 何静宇, 等. 碳纳米管薄膜增强复合材料Ⅰ型断裂韧性研究[J]. 炭素技术, 2018, 37(4): 15-20, 32.
[12] Zeng L P, Cao L Y, Huang J F, et al. Effect of processing factors on flexural properties of CF-HAPMMA composites[J]. Journal of Reinforced Plastics and Composites, 2010, 29(8): 1187-1194.
[13] Subagia I D G A, Kim Y, Tijing L D, et al. Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers[J]. Composites Part B Engineering, 2014, 58: 251-258
[14] Guo Y F, Yang J, He Y H, et al. Tensile and bending strengths of TR-30s carbon fiber three dimensional braided composites at different temperature[J]. Advanced Materials Research, 2010, 97-101.
[15] Hoffmann J, Scharr G. Mechanical properties of composite laminates reinforced with rectangular z-pins in monotonic and cyclic tension[J]. Composites Part A Applied Science & Manufacturing, 2018.