复合材料捻子条自动化制造工艺研究

玻璃钢/复合材料 ›› 2019, Vol. 0 ›› Issue (4): 67-70.

复合材料捻子条自动化制造工艺研究

闫超, 安慎慎, 苏佳智^*

中国商飞上海飞机制造有限公司, 上海 201324

收稿日期:2018-08-10 出版日期:2019-04-28 发布日期:2019-04-28
通讯作者: 苏佳智(1983-),男,硕士,高级工程师,主要研究方向为复合材料自动化制造技术,sujiazhi@comac.cc。
作者简介:闫超(1985-),男,硕士,高级工程师,主要研究方向为复合材料自动化制造技术。

AUTOMATED MANUFACTURING PROCESS STUDY OF COMPOSITE RADIUS FILLERS

YAN Chao, AN Shen-shen, SU Jia-zhi^*

COMAC Shanghai Aircraft Manufacturing Co., Ltd., Shanghai 201324, China

Received:2018-08-10 Online:2019-04-28 Published:2019-04-28

摘要/Abstract

摘要： 捻子条是复合材料梁肋三角区必不可少的填充材料。为了优化捻子条的制造工艺,提高制造质量,提高自动化程度,开展了材料构型、成型温度、材料填充数量等工艺参数的研究,探索不同的工艺参数对捻子条制造质量的影响。结果表明:材料填充数量为102%,拉挤成型温度为100 ℃,材料构型选取6.35 mm×6层,可以保证捻子条的尺寸稳定、外观质量好。针对帽型长桁加筋壁板的捻子条,可以采用自动铺丝+拉挤成型工艺制造捻子条。采用优化后的捻子条可以保证蒙皮和帽型长桁的装配到位,固化后壁板三角区光滑过渡,质量好。

关键词: 复合材料, 捻子条, 拉挤成型

Abstract: Radius fillers are indispensible part of filling material used in triangle area of composite beam and rib structure. To optimize manufacturing process, improve quality and enhance automatic level, the process study of material configuration, molding temperature and material filling quantity have been done to explore the influence of different process on quality of radius filler. The results show that the radius filler is of size stability and good appearance quality when the material filling quantity is 102%, molding temperature is 100 ℃, the material configuration is 6.35 mm×6 ply. Automated fiber placement and pultrusion process should be used to produce the radius filler of omega stringer reinforced panel. The skin and stringer can be assembled very well when the optimized process is used, and the triangle area of panel is smooth and of high quality.

Key words: composite, radius fillers, pultrusion

中图分类号:

TB332

闫超, 安慎慎, 苏佳智. 复合材料捻子条自动化制造工艺研究[J]. 玻璃钢/复合材料, 2019, 0(4): 67-70.

YAN Chao, AN Shen-shen, SU Jia-zhi. AUTOMATED MANUFACTURING PROCESS STUDY OF COMPOSITE RADIUS FILLERS[J]. Fiber Reinforced Plastics/Composites, 2019, 0(4): 67-70.

参考文献

[1] Meeks C, Greenhalgh E, Falzon B G. Stiffener debonding mechanisms in post-buckled CFRP aerospace panels. Composites Part A Applied Science ＆ Manufacturing, 2005, 36(7) : 934-946.
[2] 陈际伟, 翟全胜, 叶宏军. 5428/T700体系成型“T”型长桁工艺研究. 高科技纤维与应用, 2010, 35(3): 36-40.
[3] Wang H L, Xiong M R, Duan Y X, et al. The hand making of radius fillers and the establishment of its evaluative requirements. Advanced Materials Research, 2014, 936: 1973-1984.
[4] Stawski S W. Method of forming composite radius fillers: U.S. 4789594. 1988.
[5] Gross R D, Kushner B D. Shaped unidirectional fiber preforms: U.S. 5650229. 1997.
[6] George P E,Kajita K B, West B P V. Method of making a laminated composite radius filler: U.S. 6709538 B2. 2004.
[7] Gants W L, Kline W T, Sneddon J T. Machine for forming composite material into fillets: U.S. 4559005. 1985.
[8] Chapman M R, Pham K M, Vetter D P. Composite filler: European 2907652 A2. 2015.
[9] George P E, Kajita K B, Van West B P. Laminated composite radius filler: U.S. 6562436 B2. 2003.
[10] Derau F C V, Cavin M G, U S. Method and apparatus for forming a filler: U.S. 4778545. 1988.
[11] 邹靖, 湛利, 等. 捻子条填充量对T 型件成型质量的影响. 玻璃钢/复合材料, 2017(3): 70-75.
[12] 黄彬瑶, 熊美蓉, 等. 不同手工制备方法对预浸料捻子条质量的影响. 复合材料学报, 2015, 1(32): 260-267.
[13] 陈博. 我国复合材料拉挤成型技术及应用发展情况分析. 玻璃钢/复合材料, 2014(9): 34-41.
[14] 陈以传, 齐俊伟, 等. 帽形长桁先进拉挤预成型技术研究. 玻璃钢/复合材料, 2018(6): 73-77.
[15] 罗云烽, 彭公秋, 曹正华, 等. 航空用热压罐外固化预浸料复合材料的应用. 航空制造技术, 2012(12): 26-31.