玻璃钢/复合材料 ›› 2019, Vol. 0 ›› Issue (4): 75-78.

• 应用研究 • 上一篇    下一篇

风云四号卫星天线罩制备及性能研究

逄增凯, 李耘飞, 刘轶铎, 刘莉莉   

  1. 北京玻钢院复合材料有限公司, 北京 102101
  • 收稿日期:2019-01-14 出版日期:2019-04-28 发布日期:2019-04-28
  • 作者简介:逄增凯(1985-),男,工程师,主要从事复合材料工艺方面的研究,pangzengkai1985@126.com。

PREPARATION AND PERFORMANCE STUDY OF THE RADOME FOR FY-4 SATELLITE

PANG Zeng-kai, LI Yun-fei, LIU Yi-duo, LIU Li-li   

  1. Beijing Composite Materials Co., Ltd., Beijing 102101, China
  • Received:2019-01-14 Online:2019-04-28 Published:2019-04-28

摘要: 主要介绍了一种风云四号卫星用大尺寸、高性能雷达天线罩。该天线罩为泡沫夹层结构,选用无碱玻纤布、不饱和聚酯树脂、聚氨酯泡沫和表面涂层体系,采用手糊配合真空灌注工艺常温固化成型,对其结构在67 m/s风载下进行结构分析,最大形变为50 mm。泡沫与蒙皮成型前,对泡沫进行表面处理,提高两者的界面粘接性能。该方法效率高、表面质量好、力学性能优良,平拉强度为0.35 MPa,弯曲强度为28.3 MPa,剪切强度为320 kPa,侧压强度为60.8 MPa;电性能优异,L/S/C波段介电损耗介于0.1 dB~0.6 dB之间。

关键词: 天线罩, 泡沫夹层结构, 复合材料, 电性能

Abstract: This paper mainly introduced a large size and high-performance radar radome for FY-4 satellite. The radome was a foam sandwich structure, using free E glass cloth, unsaturated polyester resin, polyurethane foam and surface coating system. The radome was prepared by hand lay-up molding and vacuum infusion process technology at room temperature to solidify. Structure calculation for the radome was analyzed in 67 m/s wind load, with a maximum deformation of 50 mm. Before the foam and skin forming, the surface treatment of foam was used to improve the interface bonding performance. The forming process was of high efficiency and good surface quality. The mechanical properties were excellent with the tensile strength of 0.35 MPa, the bending strength of 28.3 MPa, the shear strength of 320 kPa and the lateral pressure strength of 60.8 MPa. The electrical performance of the radome was good, and the dielectric loss in the L/S/C band was between 0.1 dB and 0.6 dB.

Key words: radome, foam sandwich structure, composite material, electric properties

中图分类号: