非对称复杂泡沫夹芯复合材料VARI成型工艺设计与验证

玻璃钢/复合材料 ›› 2019, Vol. 0 ›› Issue (8): 104-108.

非对称复杂泡沫夹芯复合材料VARI成型工艺设计与验证

刘亚男,刘晨晓,李永行,原崇新

中国商飞北京民用飞机技术研究中心民用飞机结构与复合材料北京市重点实验室,北京102211

收稿日期:2018-12-03 出版日期:2019-08-28 发布日期:2019-08-28
作者简介:刘亚男(1986-),女,博士,高工,主要从事民机复合材料成型工艺与性能方面的研究,liuyanan@comac.cc。

DESIGN AND VERIFICATION OF VARI PROCESS FOR ASYMMETRIC COMPLEX FOAM SANDWICH COMPOSITES

LIU Ya-nan, LIU Chen-xiao, LI Yong-hang, YUAN Chong-xin

Beijing Aeronautical Science & Technology Research Institute of COMAC, Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing 102211, China

Received:2018-12-03 Online:2019-08-28 Published:2019-08-28

摘要/Abstract

摘要： 针对一种民用飞机整流罩结构件,采用PAM-RTM辅助进行了非对称泡沫夹层复合材料结构的真空辅助液体成型工艺流道设计与优化,通过对比分析不同的流道设计方案,获取了非对称带开口的复杂泡沫夹层复合材料结构液体成型注胶过程中树脂的流动规律,形成了优选注胶方案,并进行了实际工艺验证。最后,对试验件成型质量进行了检测,无损检测结果表明试验件成型质量良好,没有超标缺陷。研究结果可为复杂泡沫夹层结构液体成型技术在民机结构上的应用奠定技术基础。

关键词: 泡沫夹芯, 复合材料, PAM-RTM, 树脂灌注

Abstract: Aiming to solve the manufacture problems of civil aircraft aft fairing structure using vacuum assisted resin infusion (VARI) process, PAM-RTM simulation was adopted to assist the designing and optimization of resin flow during the resin infusion process for asymmetric foam sandwich composite structures. Firstly, the simulation process of resin flow was established based on PAM-RTM software, and four different resin injection schemes were proposed and conducted. Through comparison and analysis of the four different simulation schemes, the resin flow rules during injection process for the complex foam sandwich composite material with opening area have been obtained. Then, the optimum injection scheme was selected and verified by experiment. Finally, the quality of the fabricated foam sandwich composite was tested, and the non-destructive testing results demonstrated the good quality without defects, as well as good uniformity in thickness. The research results might be useful for the application of complex foam sandwich composites manufactured by liquid forming technology in civil aircraft structures.

Key words: foam sandwich, composite, PAM-RTM, resin injection

中图分类号:

TB332

刘亚男,刘晨晓,李永行,原崇新. 非对称复杂泡沫夹芯复合材料VARI成型工艺设计与验证[J]. 玻璃钢/复合材料, 2019, 0(8): 104-108.

LIU Ya-nan, LIU Chen-xiao, LI Yong-hang, YUAN Chong-xin. DESIGN AND VERIFICATION OF VARI PROCESS FOR ASYMMETRIC COMPLEX FOAM SANDWICH COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2019, 0(8): 104-108.

参考文献

[1] 包建文. 高效低成本复合材料及其制造技术[M]. 北京: 国防工业出版社, 2012: 17-20.
[2] 周雷敏, 孙沛. 波音787客机的复合材料国际化制造[J]. 高科技纤维与应用, 2013(2): 57-61.
[3] 赵晨辉, 张广成, 张悦周. 真空辅助树脂注射成型(VARI)研究进展[J]. 玻璃钢/复合材料, 2009(1):80-84.
[4] 徐东明, 刘兴宇, 杨慧. 低成本真空辅助成型技术在民用飞机复合材料结构上的应用[J]. 航空制造技术, 2014(z2): 87-89.
[5] Gardiner G. Resin infused MS-21 wings and wing box[J]. High performance composites, 2014(1):29.
[6] 姜茂川, 赵龙, 刘强, 等. VARI液体成型工艺制备复合材料帽型泡沫夹芯构件的工艺模拟及验证[J]. 复合材料学报, 2013(30):266-272.
[7] 贾欲明, 韩全民, 李巧, 等. 泡沫夹层结构在飞机次承力结构中的应用[J]. 航空制造技术, 2009(s1):8-12.
[8] Matsuzaki R, Kobayashi S, Todoroki A, et al. Flow control by pro-gressive forecasting using numerical simulation during vacuum assisted resin transfer molding[J]. Composites: Part A, 2013, 45(2):79-87.
[9] 刘刚, 罗楚养, 李雪芹, 等. 复合材料厚壁连杆RTM成型工艺模拟及制造验证[J]. 复合材料学报, 2012, 29(4): 105-112.
[10] 刘亚男, 原崇新, 等. 一种新型泡沫填充T型加筋壁板液体成型共固化工艺研究[J]. 航空制造技术, 2018, 61: 74-77.
[11] Lawrence J M, Frey P, et al. Simulation and validation of resin flow during manufacturing of composite panels containing embedded impermeable inserts with the VARTM process[J]. Polymer Composites, 2007, 28(4): 442-450.
[12] 熊美蓉, 段跃新, 董安琪, 等. 真空辅助树脂灌注工艺成型泡沫夹芯结构工艺设计与控制[J]. 复合材料学报, 2013, 30(3): 28-34.
[13] 张家莹, 段跃新, 肇研, 等. VARI成型泡沫夹芯壁板结构界面性能[J]. 复合材料学报, 2013, 30 (1): 73-82.
[14] 肖飞, 姜茂川, 刘强, 等. 复合材料副翼典型结构件的VARI工艺模拟及试验验证[J]. 航空材料学报, 2015(35): 69-76.
[15] 魏俊伟, 成天健, 郭万涛. 泡沫夹芯结构复合材料VARI工艺模拟研究[J]. 工程塑料应用, 2012, 40(4): 33-38.
[16] 魏俊伟, 郭万涛, 张用兵. 夹芯结构复合材料构件VARI工艺仿真计算与成型实验[J]. 材料开发与应用, 2012, 27(4): 51-58.
[17] 肖飞, 原崇新, 丛晶洁. 复合材料加筋壁板结构件VARI液体成型工艺计算模拟[J]. 航空材料学报, 2016(36): 47-54.